Consider the following statements : Any element connected in 1. Series with an ideal current source is...

Consider the following statements : Any element connected in 

1. Series with an ideal current source is redundant. 2. Parallel with an ideal current source is redundant. 3. Series with an ideal voltage source is redundant. . 4. Parallel with an ideal voltage source is redundant. 

Which of the above statements is/are correct ?
by

1 Answer

Answer :

Series with an ideal current source is redundant. and Parallel with an ideal voltage source is redundant. 

by

Related questions

Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Last Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series ...

Description : A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series circuit, just after the switch is closed, is equal to (1) Zero (2) V/L (3) V/C (4) V.L/C 

Last Answer : When is a series RLC circuit is over damped

the nonideal batteries are connected in series. Consider the following statements : (A)The equivalent emf is larger than either of the two emfs. (B) t

Description : the nonideal batteries are connected in series. Consider the following statements : (A)The equivalent emf is larger than either of the two emfs. (B) t

Last Answer : the nonideal batteries are connected in series. Consider the following statements : (A)The equivalent emf is ... wrong D. Each of A and B is wrong

Consider the following statements associated with the basic electrostatic properties of ideal conductors :

Description : Consider the following statements associated with the basic electrostatic properties of ideal conductors :  1. The resultant field inside is zero. 2. The net charge density in the interior is zero. 3. Any net charges reside on the ... (b) 3, 4 and 5 only (c) 1, 2 and 3 only (d) 2 and 3 only

Last Answer : Consider the following statements associated with the basic electrostatic properties of ideal conductors : 1. The resultant field inside is zero. 2. The net charge density in the interior is zero. 3. Any net charges reside on the ... (b) 3, 4 and 5 only (c) 1, 2 and 3 only (d) 2 and 3 only

What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Description : What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Last Answer : Answer: C

If four 90 ohm resistors are connected in series across an 18 V source, the current equals

Last Answer : If four 90 ohm resistors are connected in series across an 18 V source, the current equals 50 mA.

Three equal resistors connected in series across a source of emf together...

Description : Three equal resistors connected in series across a source of emf together dissipate 10 watts of power. What would be the power dissipated in the same resistors when they are connected in parallel across the same source of emf? 

Last Answer : Three equal resistors connected in series across a source of emf together dissipate 10 watts of power. 90 watts would be the power dissipated in the same resistors when they are connected in parallel across the same source of emf.

Consider the following statements: 1. A grid connected induction generator always supplies

Description : Consider the following statements:  1. A grid connected induction generator always supplies leading reactive power to the bus  2. An overexcited synchronous motor draws current at a lagging power factor  3. An underexcited synchronous ... (c) 1, 3 and 4 are correct (d) 1, 2, 3 and 4 are correct 

Last Answer : Consider the following statements:  1. A grid connected induction generator always supplies leading reactive power to the bus  2. An overexcited synchronous motor draws current at a lagging power factor  3. An underexcited ... correct (c) 1, 3 and 4 are correct (d) 1, 2, 3 and 4 are correct 

Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range until a suitable reading is obtained. C. The indicating needle is deflected from left to right regardless of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Description : Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range ... of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Last Answer : Answer: A

Which of the following statements represents the main difference between a relay and a contactor? A. Contactors control current and relays control voltage. B. A relay is series connected and a contactor is parallel connected. C. Contactors can handle heavier loads than relays. D. Contactors are made from silver and relays are made from copper.

Description : Which of the following statements represents the main difference between a relay and a contactor? A. Contactors control current and relays control voltage. B. A relay is series connected and a contactor ... loads than relays. D. Contactors are made from silver and relays are made from copper.

Last Answer : Answer: C

Three resistors which have different values are connected in series. Which one of the following statements is correct? w) The potential drop across all three resistors is the same. x) The same current passes through all three resistors. y) The same power is dissipated by all three resistors.

Description : Three resistors which have different values are connected in series. Which one of the following statements is correct? w) The potential drop across all three resistors is the same. x) The same current passes through all three resistors. y) The same power is dissipated by all three resistors. 

Last Answer : ANSWER: X -- THE SAME CURRENT PASSES THROUGH ALL THREE RESISTORS. 

Consider the following statements with respect to a high Q, series RLC circuit under resonance

Description : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3 ... in magnitude 4. The voltage accross L and C are maximum Which of these statements are correct?

Last Answer : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3. ... The voltage accross L and C are maximum Which of these statements are correct? 1,3 and 4

An ideal current source is one whose internal resistance is

Description : An ideal current source is one whose internal resistance is  (A) Very high (B) zero (C) infinite (D) very low

Last Answer : An ideal current source is one whose internal resistance is infinite 

Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is

Description : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

Last Answer : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

A supply of 24 V DC is applied across a circuit which consist of three resistors connected in parallel R1= 1.2KΩ, R2= 560 Ω, R3= 2.1Ω and a fourth resistor of 7.8 Ω connected in series with the parallel group. Determine the current, voltage and power across each resistor

Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series with the same source is

Description : Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series with the same source is

Last Answer : Two bulbs when connected in parallel to a source take 60 W each, the power consumed, when they are connected in series ... W B. 30 W C. 60 W D. 120 W

Two resistors of `6 Omega " and " 9 Omega` are connected in series to a 120 V source. The power consumed by the `6 Omega` resistor is

Description : Two resistors of `6 Omega " and " 9 Omega` are connected in series to a 120 V source. The power consumed by the `6 Omega` resistor is

Last Answer : Two resistors of `6 Omega " and " 9 Omega` are connected in series to a 120 V source. The power consumed by ... 384 W B. 616 W C. 1500 W D. 1800 W

Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Description : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Last Answer : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power ... B. 160 W C. `37.5 W` D. 60 W

Two bulbs consume same energy when operated at `200 V and 300 V` , respectively . When these bulbs are connected in series across a dc source of `500

Description : Two bulbs consume same energy when operated at `200 V and 300 V` , respectively . When these bulbs are connected in series across a dc source of `500

Last Answer : Two bulbs consume same energy when operated at `200 V and 300 V` , respectively . When these bulbs ... ratio of powers consumed across them is `2//3`

Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Description : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Last Answer : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power ... `37.5` W B. 75W C. 80W D. 40 W

An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Description : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Last Answer : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and ... and the power dissipated in the `L-C-R` circuit

In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Description : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Last Answer : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L) ... (2) A` C. `20sqrt(2) A` D. `25sqrt(2) A`

What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Description : What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Last Answer : You need to provide values of resistor and inductor etc to find the phase angle.

A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Description : A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Last Answer : 50 volts.

Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Last Answer : b. 90W

Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor

Description : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Last Answer : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Two nonideal batteries are connected in parallel. Consider the following statements: (A)The equivalent emf is smaller than either of the two emfs. (B)

Description : Two nonideal batteries are connected in parallel. Consider the following statements: (A)The equivalent emf is smaller than either of the two emfs. (B)

Last Answer : Two nonideal batteries are connected in parallel. Consider the following statements: (A)The equivalent emf is ... wrong D. Both A and B are correct

Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Description : Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Last Answer : Answer: A

Which one of the following statements for a dc machine which is provided with inter pole winding (IW) as well as compensating winding (CW) is correct a) Both IW and CW are connected in series with Armature winding b) Both IW and CW are connected in parallel with Armature winding c) IW connected in series but CW is connected in parallel with Armature winding d) CW connected in series but IW is connected in parallel with Armature winding

Description : Which one of the following statements for a dc machine which is provided with inter pole winding (IW) as well as compensating winding (CW) is correct a) Both IW and CW are connected in ... parallel with Armature winding d) CW connected in series but IW is connected in parallel with Armature winding

Last Answer : Ans: Both IW and CW are connected in series with Armature winding

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

Description : An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

Last Answer : An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure ... resistor and inductor `sqrt(10x)`A. Find value of x

State the internal resistance of ideal current and ideal voltage source.

Description : State the internal resistance of ideal current and ideal voltage source.

Last Answer : The internal resistance of ideal current and ideal voltage source: Ideal voltage source has zero internal resistance  Ideal current source has infinite internal resistance 

Draw ideal and practical voltage source and current source.

Description : Draw ideal and practical voltage source and current source.

Last Answer : Voltage Source: Current Source:

Draw – (i) Practical voltage source (ii) Ideal current source

Description : Draw – (i) Practical voltage source (ii) Ideal current source

Last Answer : i) Practical voltage source  ii) Ideal current source Where, Is = Current Source Rs = internal resistance of source

Voltage Source and Current Source : Ideal and Practical

Description : Voltage Source and Current Source : Ideal and Practical

Last Answer : An ideal voltage source maintains constant voltage across its terminals regardless of the current flowing in those terminals. An ideal current source maintains constant current through its terminals regardless of the voltage across those terminals.

The internal resistances of an ideal current source, and an ideal voltage source are, respectively,

Description : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, (A) 0, ∞ (B) ∞, ∞ (C) ∞, 0 (D) 0,0

Last Answer : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, ∞, 0

Consider the following statements - 1. Cuba is considered the sugar bowl of the world 2. Sugar was a rare commodity in Europe till the middle ages 3. Honey is a rich source of vitamins and minerals 4. All green plants synthesize sugar that are subsequently converted into lipids, polysaccharides, and/or proteins Which of the above statement/s is/are true? (a) Only 1 (b) 1 and 3 (c) 2 and 3 (d) 2 and 4

Description : Consider the following statements - 1. Cuba is considered the sugar bowl of the world 2. Sugar was a rare commodity in Europe till the middle ages 3. Honey is a rich source of vitamins and minerals 4. All green plants synthesize sugar ... is/are true? (a) Only 1 (b) 1 and 3 (c) 2 and 3 (d) 2 and 4

Last Answer : Ans:(d)

Consider the following statements and select the correct answer from the code given below: i. Rajasthan receives the highest solar radiation in the country. ii. India has the fifth largest installed wind power in the world. iii. The maximum amount of wind power is contributed by Tamil Nadu. iv. The primary source of uranium in India is Jaduguda. Codes: (A) i and ii (B) i, ii and iii (C) ii and iii (D) i and iv

Description : Consider the following statements and select the correct answer from the code given below: i. Rajasthan receives the highest solar radiation in the country. ii. India has the fifth largest installed wind power in the world. iii. The ... (A) i and ii (B) i, ii and iii (C) ii and iii (D) i and iv

Last Answer : Answer: D

Consider the following statements S1 and S2 : S1 : A hard handover is one in which the channel in the source cell is retained and used for a while in parallel with the channel in the target cell. S2 : A soft handover is one in which the channel in the source cell is released and only then the channel in the target cell is engaged. (A) S1 is true and S2 is not true. (B) S1 is not true and S2 is true. (C) Both S1 and S2 are true. (D) Both S1 and S2 are not true.

Description : Consider the following statements S1 and S2 : S1 : A hard handover is one in which the channel in the source cell is retained and used for a while in parallel with the channel in the target cell. S2 : A soft handover ... and S2 is true. (C) Both S1 and S2 are true. (D) Both S1 and S2 are not true.

Last Answer : (D) Both S1 and S2 are not true.

Define 'Ideal voltage source' and 'Practical voltage source'. Draw the symbol for each.

Description : Define 'Ideal voltage source' and 'Practical voltage source'. Draw the symbol for each.

Last Answer : i) Ideal voltage source: A voltage source whose terminal voltage always remains constant for all values of output current, is known as an ideal voltage source. It has zero internal resistance.  ... the voltage drop in the internal resistance.  Symbol of Practical Voltage Source: 

The internal resistance of an ideal voltage source is :

Description : The internal resistance of an ideal voltage source is : (A) Zero (B) Infinity (C) A finite value (D) None of the above

Last Answer : The internal resistance of an ideal voltage source is Zero

what is ideal voltage source ?

Description : what is ideal voltage source?

Last Answer : every voltage source have their own resistance that is called as internal resistance it is because of the resistance of electrodes and electrolytes in the battery interms of other supplyit have ... in universe it means ideal voltage source is this voltage source having internal resistance zero

Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch

Description : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

Last Answer : Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

When 10 cells in series are connected to the ends of a resistance of `59 Omega`, the current is found to be 0.25 A, but when the same cells after bein

Description : When 10 cells in series are connected to the ends of a resistance of `59 Omega`, the current is found to be 0.25 A, but when the same cells after bein

Last Answer : When 10 cells in series are connected to the ends of a resistance of `59 Omega`, the ... Calculate the internal resistance and emf of each cell.

10 cells, each of internal resistance `0.5 Omega` and 1.2 V emf are connected (a) all in series and (b) all in paralle. Calculate the current sent in

Description : 10 cells, each of internal resistance `0.5 Omega` and 1.2 V emf are connected (a) all in series and (b) all in paralle. Calculate the current sent in

Last Answer : 10 cells, each of internal resistance `0.5 Omega` and 1.2 V emf are connected (a) all in ... each case through a wire of resistance `0.8 Omega`.

A copper wire of diameter 0.16 cm is connected in series to an aluminium wire of diameter 0.25 cm. A current of 10 A is passed through them. Find (i)

Description : A copper wire of diameter 0.16 cm is connected in series to an aluminium wire of diameter 0.25 cm. A current of 10 A is passed through them. Find (i)

Last Answer : A copper wire of diameter 0.16 cm is connected in series to an aluminium wire of diameter 0.25 cm. A ... of aluminium wire is `10^(29) m^(-3)`.

Four cells, each of emf E and internal resistance r, are connected in series across an external resistance reverse. Then, the current in the external

Description : Four cells, each of emf E and internal resistance r, are connected in series across an external resistance reverse. Then, the current in the external

Last Answer : Four cells, each of emf E and internal resistance r, are connected in series across an external resistance reverse. Then, ... (3r+R)` D. `(2E)/(3r+R)`