Voltage Source and Current Source : Ideal and Practical

Voltage Source and Current Source : Ideal and Practical

by

2 Answers

Answer :

Voltage Source and Current Source : Ideal and Practical

image
image
image
image
image
image
image
image
image

by

Answer :

An ideal voltage source maintains constant voltage across its terminals regardless of the current flowing in those terminals.

An ideal current source maintains constant current through its terminals regardless of the voltage across those terminals.
by

Related questions

Draw ideal and practical voltage source and current source.

Description : Draw ideal and practical voltage source and current source.

Last Answer : Voltage Source: Current Source:

Draw – (i) Practical voltage source (ii) Ideal current source

Description : Draw – (i) Practical voltage source (ii) Ideal current source

Last Answer : i) Practical voltage source  ii) Ideal current source Where, Is = Current Source Rs = internal resistance of source

(i) Discuss ideal and practical voltage source (ii) Compare CB, CC and CE configuration

Description : (i) Discuss ideal and practical voltage source (ii) Compare CB, CC and CE configuration

Last Answer : (i) Discuss ideal and practical voltage source Ideal voltage source The ideal voltage source has a constant voltage across its terminal, irrespective of the current drawn from the source. Ideal Voltage Source have zero ... to reduce. (ii) Compare CB, CC and CE configuration

Define 'Ideal voltage source' and 'Practical voltage source'. Draw the symbol for each.

Description : Define 'Ideal voltage source' and 'Practical voltage source'. Draw the symbol for each.

Last Answer : i) Ideal voltage source: A voltage source whose terminal voltage always remains constant for all values of output current, is known as an ideal voltage source. It has zero internal resistance.  ... the voltage drop in the internal resistance.  Symbol of Practical Voltage Source: 

Explain the suitable example to convert a practical current source into equivalent voltage source.

Description : Explain the suitable example to convert a practical current source into equivalent voltage source.

Last Answer : The open- circuit voltage across terminals A and B is Voc = drop across R  =5x2=10V Hence, voltage source has a voltage of 10V and the same resistance of 2Ω

Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Description : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Last Answer : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Nodal analysis example with voltage source and supernode

Description : Nodal analysis example with voltage source and supernode

Last Answer : Nodal analysis example with voltage source and supernode

Nodal analysis example with dependent current source

Description : Nodal analysis example with dependent current source

Last Answer : Nodal analysis example with dependent current source

For practical purposes, in a simple series circuit, the source voltage will be dropped across one resistor if it has ______________. A. half the resistance of the other resistor B. a resistance equal to the other C. at least ten times the resistance of the other D. a partial short circuit

Description : For practical purposes, in a simple series circuit, the source voltage will be dropped across one resistor if it has ______________. A. half the resistance of the other resistor B. a resistance equal to the other C. at least ten times the resistance of the other D. a partial short circuit

Last Answer : Answer: C

In a practical voltage source, the source resistance is

Description : In a practical voltage source, the source resistance is (A) very low compared to load resistance (B) very high compared to load resistance (C) equal to the load resistance (D) zero

Last Answer : In a practical voltage source, the source resistance is very low compared to load resistance 

State the internal resistance of ideal current and ideal voltage source.

Description : State the internal resistance of ideal current and ideal voltage source.

Last Answer : The internal resistance of ideal current and ideal voltage source: Ideal voltage source has zero internal resistance  Ideal current source has infinite internal resistance 

The internal resistances of an ideal current source, and an ideal voltage source are, respectively,

Description : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, (A) 0, ∞ (B) ∞, ∞ (C) ∞, 0 (D) 0,0

Last Answer : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, ∞, 0

A practical current source is usually represented by....

Description : A practical current source is usually represented by  a. A resistance in series with an ideal current source.  b. A resistance in parallel with an ideal current source.  c. A resistance in parallel with an ideal voltage source.  d. None of the above. 

Last Answer : A practical current source is usually represented by a resistance in parallel with an ideal current source.

Nodal Analysis with Voltage Sources

Description : Nodal Analysis with Voltage Sources

Last Answer : Nodal Analysis with Voltage Sources

Voltage

Description : Voltage

Last Answer : Voltage

Ideal Voltage Source What ?

Last Answer : that Voltage Of the source Internal Resistance Or Impedance Zero Him Ideal Voltage Source Says.

What optical source radiates light uniformly in all directions? A. Isotropic source B. Lambertian source C. Voltage source D. Ideal source

Description : What optical source radiates light uniformly in all directions? A. Isotropic source B. Lambertian source C. Voltage source D. Ideal source

Last Answer : B. Lambertian source

Explain ideal voltage source with suitable diagram.

Description : Explain ideal voltage source with suitable diagram.

Last Answer : A voltage source is a two terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. ... the terminal voltage remains constant equal to V volts without load (RL = ∞) or with load

An ideal voltage source will charge an ideal capacitor

Description :  An ideal voltage source will charge an ideal capacitor A) in infinite time B) exponentially C) instantaneously D) cannot be guessed

Last Answer : An ideal voltage source will charge an ideal capacitor instantaneously 

The internal resistance of an ideal voltage source is :

Description : The internal resistance of an ideal voltage source is : (A) Zero (B) Infinity (C) A finite value (D) None of the above

Last Answer : The internal resistance of an ideal voltage source is Zero

An ideal voltage source has?

Description : An ideal voltage source has?

Last Answer : An ideal voltage source has zero internal resistance.

An ideal voltage source should have?

Description : An ideal voltage source should have?

Last Answer : An ideal voltage source should have zero source resistance.

what is ideal voltage source ?

Description : what is ideal voltage source?

Last Answer : every voltage source have their own resistance that is called as internal resistance it is because of the resistance of electrodes and electrolytes in the battery interms of other supplyit have ... in universe it means ideal voltage source is this voltage source having internal resistance zero

Chemical Effect of Electric current

Description : Chemical Effect of Electric current

Last Answer : Chemical Effect of Electric current

Magnetic Effect of Electric Current

Description : Magnetic Effect of Electric Current

Last Answer : Magnetic effect of electric current. Field is effect or characteristics in space due to which an object experience a force. Field is a force without direct contact. The Imaginary lines of force ... iron junk etc. Effects of electric current are heating effect, magnetic effect and chemical effect.

Heating Effect of Electric Current

Description : Heating Effect of Electric Current

Last Answer : Heating Effect of Electric Current

Current division rule example

Description : Current division rule example

Last Answer : Current division rule example

Electric Current

Description : Electric Current

Last Answer : Electric current is the flow of charges. The electrons flow from higher density area of electrons to lowers density area of electrons. The terminal of battery which we called positive terminal of ... circuit is called electric current. The unit of electric current is Coulomb per Second or Ampere.

The most practical method of controlling the RPM of a step-speed AC motor is to _____________. A. change input voltage B. vary the number of poles C. vary power factor D. change the number of brushes

Description : The most practical method of controlling the RPM of a step-speed AC motor is to _____________. A. change input voltage B. vary the number of poles C. vary power factor D. change the number of brushes

Last Answer : Answer: B

The most practical way to control the voltage output of an AC generator is to vary the _____________. A. number of windings B. speed of the rotating field C. strength of the rotating magnetic field D. power factor of the load

Description : The most practical way to control the voltage output of an AC generator is to vary the _____________. A. number of windings B. speed of the rotating field C. strength of the rotating magnetic field D. power factor of the load

Last Answer : Answer: C

In the inverting configuration, what is the voltage (for all practical purposes) at the inverting input to the operational amplifier if the input signal is a 1-volt, peak-to-peak sine wave?

Description : In the inverting configuration, what is the voltage (for all practical purposes) at the inverting input to the operational amplifier if the input signal is a 1-volt, peak-to-peak sine wave?

Last Answer : 0 volts.

How is output voltage controlled in practical alternators?

Description : How is output voltage controlled in practical alternators?

Last Answer : By varying the voltage applied to the field windings.

A practical formula for determining the thickness of insulation between low voltage and high voltage windings is (a) 1 + 0.2 kVmm (6) 2 + 0.5 kVmm (c) 4 + 0.7 kV mm (d) 5 + 0.9 kV mm

Description : A practical formula for determining the thickness of insulation between low voltage and high voltage windings is (a) 1 + 0.2 kVmm (6) 2 + 0.5 kVmm (c) 4 + 0.7 kV mm (d) 5 + 0.9 kV mm

Last Answer : (d) 5 + 0.9 kV mm

The ideal characteristic of a voltage stablizer is A) constant output voltage with low internal resistance B) constant output current with low internal resistance C) constant output voltage with high internal resistance D) constant internal resistance with variable output voltage.

Description : The ideal characteristic of a voltage stablizer is A) constant output voltage with low internal resistance B) constant output current with low internal resistance C) constant output voltage with high internal resistance D) constant internal resistance with variable output voltage.

Last Answer : A) constant output voltage with low internal resistance

An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

Description : An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

Last Answer : An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure ... resistor and inductor `sqrt(10x)`A. Find value of x

An ideal current source is one whose internal resistance is

Description : An ideal current source is one whose internal resistance is  (A) Very high (B) zero (C) infinite (D) very low

Last Answer : An ideal current source is one whose internal resistance is infinite 

Consider the following statements : Any element connected in 1. Series with an ideal current source is...

Description : Consider the following statements : Any element connected in  1. Series with an ideal current source is redundant. 2. Parallel with an ideal current source is redundant. 3. Series with an ideal voltage ... with an ideal voltage source is redundant.  Which of the above statements is/are correct ?

Last Answer : Series with an ideal current source is redundant. and Parallel with an ideal voltage source is redundant. 

What is the practical unit of electric current ?

Description : What is the practical unit of electric current ?

Last Answer : Ampere is the practical unit of current.

What is the practical unit of current ?

Description : What is the practical unit of current ?

Last Answer : The practical unit of current is ampere ( Amp).

What is the practical unit of electric current ?

Last Answer : The working unit ampere of electric current

n electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a – (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Description : n electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a – (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Last Answer : (3) Uninterrupted power supply (UPS) Explanation: A Galvanic cell, also known as battery, is an electro-chemical cell that derives electrical energy from spontaneous redox reactions taking place within ... produce direct current. A battery is a set of galvanic cells that are connected in parallel.

An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from _____________. A. one line terminal to each coil lead in succession B. one field coil to each adjacent field coil in turn C. any suitable ground to any available line lead D. any field pole to each field coil lead

Description : An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from ... C. any suitable ground to any available line lead D. any field pole to each field coil lead

Last Answer : Answer: A

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: D

A lamp has a source voltage of 110 volts and a current of 0.9 amps. What is the resistance of the lamp? A. 0.008 ohms B. 0.08 ohms C. 12.22 ohms D. 122.22 ohms

Description : A lamp has a source voltage of 110 volts and a current of 0.9 amps. What is the resistance of the lamp? A. 0.008 ohms B. 0.08 ohms C. 12.22 ohms D. 122.22 ohms

Last Answer : Answer: D

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L1? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.3 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L1? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.3 volts D. 114.8 volts

Last Answer : Answer: D

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L2? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L2? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: C

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L3? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L3? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: B

When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Description : When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Last Answer : Answer: B

One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for polarity using a/an ____________. A. iron bar across each field B. magnetic compass placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Description : One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for ... placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Last Answer : Answer: B