For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

For lower premolars, the purpose of inclining the handpiece lingually is to,
A. Avoid buccal pulp horn
B. Avoid lingual pulp horn
C. Remove unsupported enamel  
D. Conserve lingual dentine
by

1 Answer

Answer :

A. Avoid buccal pulp horn
by

Related questions

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio–Lingual in upper first molars B. Mesio–Buccal in upper first molars C. Disto–buccal in lower first molars D. Mesio–Lingual in lower first molars E. Mesio- Buccal in lower first molar

Description : the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio-Lingual in upper first molars B. Mesio-Buccal in ... first molars D. Mesio-Lingual in lower first molars E. Mesio- Buccal in lower first molar

Last Answer : B. Mesio–Buccal in upper first molars

Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as ….What is complicated by): A. The mesial concavity of the root surface B. Small lingual pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Description : Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as .What is complicated by): A. The mesial concavity of the root ... pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Last Answer : A. The mesial concavity of the root surface

The palatal pulp horn of maxillary molars is located: A. In the pulpchamber under mesiolingual cusp B. In the pulpchamber opposite the mesio distal fissure of the buccal cusp C. Under the disto lingual cusp

Description : The palatal pulp horn of maxillary molars is located: A. In the pulpchamber under mesiolingual cusp B. In the pulpchamber opposite the mesio distal fissure of the buccal cusp C. Under the disto lingual cusp

Last Answer : A. In the pulpchamber under mesiolingual cusp

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Description : for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Last Answer : C. diet must contain simple carbohydrate

Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Description : Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Last Answer : A. Small pulp chambers and root canals, normal enamel

Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Description : Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Last Answer : A. Enamel

For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Description : For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Last Answer : C. Diet must contain simple carbohydrate

Where does the bone resorption show in a pulp necrosis of a deciduous molar: A. At the root apex B. At the bifurcation C. On the buccal side of the tooth D. On the lingual side of the tooth

Description : Where does the bone resorption show in a pulp necrosis of a deciduous molar:  A. At the root apex  B. At the bifurcation  C. On the buccal side of the tooth  D. On the lingual side of the tooth 

Last Answer : B. At the bifurcation 

Why do you extract lower 8’s by directing the extraction lingually:** A. Because of the roots direction B. Thinner bone C. Lingual deviation

Description : Why do you extract lower 8’s by directing the extraction lingually:** A. Because of the roots direction B. Thinner bone C. Lingual deviation

Last Answer : B. Thinner bone

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

Which of the following cusps is more prone to crack: A. Buccal of lower molars B. Lingual of lower molars C. Lingual of upper molars D. Buccal of upper molars

Description : Which of the following cusps is more prone to crack: A. Buccal of lower molars B. Lingual of lower molars C. Lingual of upper molars D. Buccal of upper molars

Last Answer : B. Lingual of lower molars

Anaesthesia 1 mm above last lower molars will anesthetise: A. Lingual Nerve B. Long buccal nerve

Description : Anaesthesia 1 mm above last lower molars will anesthetise: A. Lingual Nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Description : Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Last Answer : B. You extend your preparation and clean it

Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Description : Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Last Answer : B. Surface demineralisation and hypo mineralisation

The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Description : The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Last Answer : A. Perpendicular to the outer surface of the tooth

Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding materials C. Is not a safe and simple method of bonding D. Bonding fails to produce a highly significant retention and good marginal integrity and clinical durability E. None of the above

Description : Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding ... highly significant retention and good marginal integrity and clinical durability E. None of the above

Last Answer : A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material

Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Description : Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Last Answer : E. All of the above

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Description : Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Last Answer : B. Dentine and cementum

In respect to Class V A. it occurs on the buccal groove (fissure) B. it occurs on the lingual groove (fissure) C. it is a result of bad oral hygiene

Description : In respect to Class V A. it occurs on the buccal groove (fissure) B. it occurs on the lingual groove (fissure) C. it is a result of bad oral hygiene

Last Answer : C. it is a result of bad oral hygiene

In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Description : In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Last Answer : B. Slightly done undercut of the buccal and lingual wall

What is the neutral zone: A. The zone where displacing forces are neutral B. The zone where buccal and lingual forces are balanced

Description : What is the neutral zone: A. The zone where displacing forces are neutral B. The zone where buccal and lingual forces are balanced

Last Answer : B. The zone where buccal and lingual forces are balanced

Class V lesions may originate: A. In lingual pits B. In buccal fissures C. Poor oral hygiene

Description : Class V lesions may originate: A. In lingual pits B. In buccal fissures C. Poor oral hygiene

Last Answer : C. Poor oral hygiene

Where would you expect to find the Mylohyoid in relation to periphery of complete denture: A. Mandibular buccal in the midline B. Mandibular lingual in the midline C. Mandibular disto buccal area

Description : Where would you expect to find the Mylohyoid in relation to periphery of complete denture: A. Mandibular buccal in the midline B. Mandibular lingual in the midline C. Mandibular disto buccal area

Last Answer : B. Mandibular lingual in the midline

To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Last Answer : B. Use mucco-compressive impression

What technique is used in the extraction of permanent 1st molars: A. Rotation movement B. Lingual movement C. Buccal movement

Description : What technique is used in the extraction of permanent 1st molars: A. Rotation movement B. Lingual movement C. Buccal movement

Last Answer : C. Buccal movement

Which direction does the palatal root of the upper first molar usually curve towards? A. Facial / buccal/ B. Lingual C. Mesial D. Distal

Description : Which direction does the palatal root of the upper first molar usually curve towards? A. Facial / buccal/ B. Lingual C. Mesial D. Distal

Last Answer : A. Facial / buccal/

Main part of tooth is (a) Enamel (b) Dentine (c) Pulp (d) None

Description : Main part of tooth is (a) Enamel (b) Dentine (c) Pulp (d) None

Last Answer : (b) Dentine

Hardest part of tooth is (a) Dentine (b) Enamel (c) Pulp (d) None

Description : Hardest part of tooth is (a) Dentine (b) Enamel (c) Pulp (d) None

Last Answer : (b) Enamel

After the initial development stage and in the absence of pathology, the size of the pulp chamber has been reduced by, A. Deposition of primary dentine B. Deposition of secondary dentine C. Reparative dentine D. Pulp fibrosis E. Deposition of reparative dentine

Description : After the initial development stage and in the absence of pathology, the size of the pulp chamber has been reduced by, A. Deposition of primary dentine B. Deposition of secondary dentine C. Reparative dentine D. Pulp fibrosis E. Deposition of reparative dentine

Last Answer : B. Deposition of secondary dentine

Which of the following would be ONE possible indication for indirect pulp capping?*** A. Where any further excavation of dentine would result in pulp exposure. B. Removal of caries has exposed the pulp C. When carious lesion has just penetrated DEJ

Description : Which of the following would be ONE possible indication for indirect pulp capping?*** A. Where any further excavation of dentine would result in pulp exposure. B. Removal of caries has exposed the pulp C. When carious lesion has just penetrated DEJ

Last Answer : A. Where any further excavation of dentine would result in pulp exposure.

The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Description : The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Last Answer : B. 50%

Hypoplasia as seen in x rays:** A. Thick enamel surface B. Thin enamel surface C. Sometimes large pulp chamber D. Can not be detected on X rays

Description : Hypoplasia as seen in x rays:** A. Thick enamel surface B. Thin enamel surface C. Sometimes large pulp chamber D. Can not be detected on X rays

Last Answer : D. Can not be detected on X rays

A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Description : A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Last Answer : C. Dentinogenesis imperfecta

Where is the narrowest part of the pulp: A. At the radiographic apex B. At the dentino-enamel junction C. At the orifices

Description : Where is the narrowest part of the pulp: A. At the radiographic apex B. At the dentino-enamel junction C. At the orifices

Last Answer : A. At the radiographic apex

The difference between deciduous and permanent teeth is: A. Deciduous teeth have a higher pulp horns and larger pulp chambers B. Deciduous teeth have flatter contact areas C. Deciduous teeth have thinner enamel surface D. All of the above

Description : The difference between deciduous and permanent teeth is: A. Deciduous teeth have a higher pulp horns and larger pulp chambers B. Deciduous teeth have flatter contact areas C. Deciduous teeth have thinner enamel surface D. All of the above

Last Answer : D. All of the above

A seven years-old boy fell off his bicycle 2 weeks ago and broke his maxillary central incisor. The pulp horn is visible as a pin point. The tooth is vital. Your treatment will be: A. Pulpectomy B. Place calcium hydroxide and fill with composite resin C. Calcium hydroxide pulpotomy

Description : A seven years-old boy fell off his bicycle 2 weeks ago and broke his maxillary central incisor. The pulp horn is visible as a pin point. The tooth is vital. Your treatment will be: A. Pulpectomy B. Place calcium hydroxide and fill with composite resin C. Calcium hydroxide pulpotomy

Last Answer : C. Calcium hydroxide pulpotomy

The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material

Description : The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material

Last Answer : A. Remove loose enamel rods

A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no other pathology. What is your management: A. Remove the dentigerous cyst B. Soft tissues recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Description : A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no ... recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Last Answer : C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Which of the following is a typical consequence of dental crowding, assuming no primary tooth has been lost prematurely? A. Overlapping of lower incisors B. Palatal displacement of upper canines C. Impaction of 15 and 25 between first premolars and first molars D. Mesial tipping of 16 and 26 E. Rotation of 16 and 26

Description : Which of the following is a typical consequence of dental crowding, assuming no primary tooth has been lost prematurely? A. Overlapping of lower incisors B. Palatal displacement of upper canines C. Impaction ... and first molars D. Mesial tipping of 16 and 26 E. Rotation of 16 and 26

Last Answer : A. Overlapping of lower incisors

Which muscle acts on the disto-lingual contour of lower denture: A. Mentalis B. Masseter C. Mylohyoid D. Buccinator

Description : Which muscle acts on the disto-lingual contour of lower denture: A. Mentalis B. Masseter C. Mylohyoid D. Buccinator

Last Answer : C. Mylohyoid

Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Description : Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Last Answer : B. Plaque accumulation is less than with lingual plate

To increase the stability of the lower denture, A. The occlusal plane should be below the tongue B. The occlusal plane should be above the tongue C. The lingual flanges should be concave

Description : To increase the stability of the lower denture, A. The occlusal plane should be below the tongue B. The occlusal plane should be above the tongue C. The lingual flanges should be concave

Last Answer : A. The occlusal plane should be below the tongue

What is not correct about Long Buccal Nerve:** A. Passes through two heads of pterygoids muscles B. Supplies mucosa over lower and upper molars C. Supplies the buccinator muscle D. Supplies skin over buccinator

Description : What is not correct about Long Buccal Nerve:** A. Passes through two heads of pterygoids muscles B. Supplies mucosa over lower and upper molars C. Supplies the buccinator muscle D. Supplies skin over buccinator

Last Answer : C. Supplies the buccinator muscle