To increase the stability of the lower denture, A. The occlusal plane should be below the tongue B. The occlusal plane should be above the tongue C. The lingual flanges should be concave

To increase the stability of the lower denture,
A. The occlusal plane should be below the tongue
B. The occlusal plane should be above the tongue
C. The lingual flanges should be concave
by

1 Answer

Answer :

A. The occlusal plane should be below the tongue
by

Related questions

Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Description : Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with conventional complete denture C. Alveolar bone resorption is reduced D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Description : Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Last Answer : B. A guide used to orient the occlusal plane

When repairing a fracture of a lower complete denture, which statement is correct: A. Self curing will distort the denture B. Cold curing will not be strong enough because of small area of attachment C. There is a possibility of occlusal disharmony

Description : When repairing a fracture of a lower complete denture, which statement is correct: A. Self curing will distort the denture B. Cold curing will not be strong enough because of small area of attachment C. There is a possibility of occlusal disharmony

Last Answer : C. There is a possibility of occlusal disharmony

Which muscle acts on the disto-lingual contour of lower denture: A. Mentalis B. Masseter C. Mylohyoid D. Buccinator

Description : Which muscle acts on the disto-lingual contour of lower denture: A. Mentalis B. Masseter C. Mylohyoid D. Buccinator

Last Answer : C. Mylohyoid

Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Description : Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Last Answer : B. Plaque accumulation is less than with lingual plate

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

The fovea palatini is a landmark to determine the posterior bonds of upper denture in which regard: A. Post dam B. Flanges

Description : The fovea palatini is a landmark to determine the posterior bonds of upper denture in which regard: A. Post dam B. Flanges

Last Answer : A. Post dam

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Description : The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Last Answer : B. Mesially

The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Description : The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Last Answer : A. Away from edentulous space

Where would you expect to find the Mylohyoid in relation to periphery of complete denture: A. Mandibular buccal in the midline B. Mandibular lingual in the midline C. Mandibular disto buccal area

Description : Where would you expect to find the Mylohyoid in relation to periphery of complete denture: A. Mandibular buccal in the midline B. Mandibular lingual in the midline C. Mandibular disto buccal area

Last Answer : B. Mandibular lingual in the midline

To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Last Answer : B. Use mucco-compressive impression

What is NOT CORRECT in regard to the lingual nerve: A. It is posterior and medial to the inferior alveolar nerve B. It passes close to the mandibular 3rd molar C. It may be anaesthetised by the mandibular nerve block D. It provides supply to the lingual gingiva E. Supplies anterior 2/3 of the tongue

Description : What is NOT CORRECT in regard to the lingual nerve: A. It is posterior and medial to the inferior alveolar nerve B. It passes close to the mandibular 3rd molar C. It may be anaesthetised by the ... nerve block D. It provides supply to the lingual gingiva E. Supplies anterior 2/3 of the tongue

Last Answer : A. It is posterior and medial to the inferior alveolar nerve

When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Description : When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Last Answer : A. Increase the compensatory curve

To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of abutment towards the marginal ridge D. Be concave E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Description : To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of ... E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Last Answer : B. Slope from the marginal ridge towards contact?? of abutment

Which part of the cranium is considered as the most stable area, A. Frankfort plane B. Occlusal plane C. Anterior cranial plane D. Anterior nasal to gnathion.

Description : Which part of the cranium is considered as the most stable area, A. Frankfort plane B. Occlusal plane C. Anterior cranial plane D. Anterior nasal to gnathion.

Last Answer : C. Anterior cranial plane

When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Last Answer : B. Decreasing the angle orientation of the occlusal plane

The MOST stable area to evaluate the craniofacial growth is: A. Nasal floor B. Cranial vault C. Occlusal plane D. Naso maxillary complex E. Anterior cranial base

Description : The MOST stable area to evaluate the craniofacial growth is: A. Nasal floor B. Cranial vault C. Occlusal plane D. Naso maxillary complex E. Anterior cranial base

Last Answer : E. Anterior cranial base

What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Last Answer : E. None of the above

The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Description : The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Last Answer : GA.Parallel to occlusal plane

In the construction of an RPD, guiding planes are created, A. Perpendicular to the occlusal plane B. Parallel towards the path of placement.

Description : In the construction of an RPD, guiding planes are created,  A. Perpendicular to the occlusal plane  B. Parallel towards the path of placement. 

Last Answer : B. Parallel towards the path of placement.

In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Description : In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Last Answer : B. Assure predictable clasp retention

Which of the following cusps is more prone to crack: A. Buccal of lower molars B. Lingual of lower molars C. Lingual of upper molars D. Buccal of upper molars

Description : Which of the following cusps is more prone to crack: A. Buccal of lower molars B. Lingual of lower molars C. Lingual of upper molars D. Buccal of upper molars

Last Answer : B. Lingual of lower molars

Anaesthesia 1 mm above last lower molars will anesthetise: A. Lingual Nerve B. Long buccal nerve

Description : Anaesthesia 1 mm above last lower molars will anesthetise: A. Lingual Nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

Why do you extract lower 8’s by directing the extraction lingually:** A. Because of the roots direction B. Thinner bone C. Lingual deviation

Description : Why do you extract lower 8’s by directing the extraction lingually:** A. Because of the roots direction B. Thinner bone C. Lingual deviation

Last Answer : B. Thinner bone

the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio–Lingual in upper first molars B. Mesio–Buccal in upper first molars C. Disto–buccal in lower first molars D. Mesio–Lingual in lower first molars E. Mesio- Buccal in lower first molar

Description : the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio-Lingual in upper first molars B. Mesio-Buccal in ... first molars D. Mesio-Lingual in lower first molars E. Mesio- Buccal in lower first molar

Last Answer : B. Mesio–Buccal in upper first molars

For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Description : For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Last Answer : A. Avoid buccal pulp horn

What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Last Answer : A. Gingival /Below/

Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Description : Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Last Answer : B. Increases when lower denture is inserted

What is TRUE about vertical dimension: A. Does not change for the whole life B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient supine reduced, stress and pain also reduced) C. Increases when a lower denture is placed in mouth

Description : What is TRUE about vertical dimension:  A. Does not change for the whole life   B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient  supine reduced, stress and pain also reduced)  C. Increases when a lower denture is placed in mouth 

Last Answer : C. Increases when a lower denture is placed in mouth 

A Patient with lower denture complaining of paresthesia of the lower lip, the most common cause is, A. Pressure on mental foramen B. Pressure on the genioglossi Mylohyoid muscles

Description : A Patient with lower denture complaining of paresthesia of the lower lip, the most common cause is, A. Pressure on mental foramen B. Pressure on the genioglossi Mylohyoid muscles

Last Answer : A. Pressure on mental foramen

Which of these muscles may affect the borders of mandibular complete denture, M07 ********* A. Mentalis (act on the lower border) B. Lateral pterygoid C. Orbicularis oris D. Levator angulioris E. Temporal

Description : Which of these muscles may affect the borders of mandibular complete denture, M07 ********* A. Mentalis (act on the lower border) B. Lateral pterygoid C. Orbicularis oris D. Levator angulioris E. Temporal

Last Answer : C. Orbicularis oris

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve. c- Prophylactic prescription of dexamethasone will dramatically reduce post operative swelling. d- Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root. e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual ... e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve.

To produce a stable correction of an upper labial segment in lingual crossbite; it is essential to:** A. Use fixed appliances B. Have adequate overbite C. Treat during growth D. Use posterior capping E. Increase vertical dimension

Description : To produce a stable correction of an upper labial segment in lingual crossbite; it is essential to:** A. Use fixed appliances B. Have adequate overbite C. Treat during growth D. Use posterior capping E. Increase vertical dimension

Last Answer : B. Have adequate overbite

As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve ADC M07 C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling D. Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising ... root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling

Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Description : Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Last Answer : . The occlusal concavity of deciduous teeth

The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Description : The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Last Answer : A. Elimination of plaque and calculus

the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Description : the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Last Answer : B. The occlusal convergence of the deciduous teeth

Occlusal cavity with extension of the buccal fissure is classified as, A. Class II B. Class III C. Class I D. Class V

Description : Occlusal cavity with extension of the buccal fissure is classified as, A. Class II B. Class III C. Class I D. Class V

Last Answer : C. Class I

the location of Class V is in, A. The buccal pit /fissure/ B. The occlusal surface C. The cervical third

Description : the location of Class V is in, A. The buccal pit /fissure/ B. The occlusal surface C. The cervical third

Last Answer : C. The cervical third

An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Last Answer : B. Contact the tooth under the survey line

Throbbing pain increases with heat and cold stimuli, the MOST probable diagnosis is, A. Cyst B. Occlusal trauma C. Advanced pulpitis

Description : Throbbing pain increases with heat and cold stimuli, the MOST probable diagnosis is, A. Cyst B. Occlusal trauma C. Advanced pulpitis

Last Answer : C. Advanced pulpitis

After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Description : After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Last Answer : A. Occlusal height

What is NOT TRUE about occlusal trauma: A. Cemental tears B. Bone loss C. Mobility D. True pocket formation E. Bleeding in periodontal ligament

Description : What is NOT TRUE about occlusal trauma: A. Cemental tears B. Bone loss C. Mobility D. True pocket formation E. Bleeding in periodontal ligament

Last Answer : D. True pocket formation