In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

In preparing a very small proximal amalgam cavity on a molar tooth what would consider,
A. Extend the cavity to the gingival margin
B. Extend the cavity beyond the contacts areas
C. Achieve at least 2mm in dentine
D. Extend cavity just beyond dento enamel junction
by

1 Answer

Answer :

D. Extend cavity just beyond dento enamel junction
by

Related questions

While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Last Answer : B. You extend your preparation and clean it

Dental caries of the proximal surfaces usually starts at, A. Somewhere between the ridge and the contact area B. Just gingival to contact areas C. Just about the gingival margin

Description : Dental caries of the proximal surfaces usually starts at, A. Somewhere between the ridge and the contact area B. Just gingival to contact areas C. Just about the gingival margin

Last Answer : B. Just gingival to contact areas

The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the interproximal contact of the restoration 4. retract the gingival tissue a. 1,2,3 b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Description : The principal reasons for placing a gingival interproximal wedge in conjunction with a matrix for amalgam condensation are to: 1. separate the teeth slightly 2. keep the band tight at the gingival margin 3. contribute to the ... b. 1,2,4 c. 2,3,4 d. 1,3,4 e. all of the above

Last Answer : e. all of the above

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Description : At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°

Last Answer : B. An obtuse angle si es el cajon proximal

The ”biologic width” is the distance between the A. Base of the gingival sulcus and the crest of alveolar bone B. Free gingival margin and the base of the gingival sulcus C. Free gingival margin and the alveolar bone D. Free gingival margin and the mucogingival junction E. Free gingival margin and the base of connective tissue attachment

Description : The biologic width is the distance between the A. Base of the gingival sulcus and the crest of alveolar bone B. Free gingival margin and the base of the gingival sulcus C. ... gingival margin and the mucogingival junction E. Free gingival margin and the base of connective tissue attachment

Last Answer : A. Base of the gingival sulcus and the crest of alveolar bone

A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with extra mercury to give easier manipulative qualities C. Several small mixes, sequentially triturated D. Several small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Description : A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with ... small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Last Answer : C. Several small mixes, sequentially triturated

The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Description : The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Last Answer : A. Perpendicular to the outer surface of the tooth

Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Description : Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Last Answer : E. All of the above

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C. 4mm reduction while forming a flattened surface D. 4mm reduction while following the original contour of the surface

Description : When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C ... forming a flattened surface D. 4mm reduction while following the original contour of the surface

Last Answer : A. 2mm reduction while forming a flattened surface

The vertical incision of a mucoperiostal flap should: A. Always extend to the alveolar mucoperiostal B. Bisect the middle of gingival papillae C. Be at the right angle of the tooth

Description : The vertical incision of a mucoperiostal flap should: A. Always extend to the alveolar mucoperiostal B. Bisect the middle of gingival papillae C. Be at the right angle of the tooth

Last Answer : A. Always extend to the alveolar mucoperiostal

Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio–Lingual in upper first molars B. Mesio–Buccal in upper first molars C. Disto–buccal in lower first molars D. Mesio–Lingual in lower first molars E. Mesio- Buccal in lower first molar

Description : the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio-Lingual in upper first molars B. Mesio-Buccal in ... first molars D. Mesio-Lingual in lower first molars E. Mesio- Buccal in lower first molar

Last Answer : B. Mesio–Buccal in upper first molars

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Description : When is a gingival groove LEAST required: A. When restoring with GIC for abrasion B. When restoring with GIC for root caries C. When restoring with GIC base and composite lamination D. When restoring with amalgam

Last Answer : C. When restoring with GIC base and composite lamination

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

It is desirable for major connectors of upper partial dentures to:** A. Be at least 5 mm away from the gingival margin B. Cover the anterior palate

Description : It is desirable for major connectors of upper partial dentures to:** A. Be at least 5 mm away from the gingival margin B. Cover the anterior palate

Last Answer : A. Be at least 5 mm away from the gingival margin

Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Description : Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Last Answer : A. Small pulp chambers and root canals, normal enamel

The gingival portion of natural teeth differs in colour from the incisal portion because the : A. Lighting angle is different B. Gingival and incisal portions have different fluorescent qualities C. Gingival area has a dentine background D. Incident light is different

Description : The gingival portion of natural teeth differs in colour from the incisal portion because the : A. Lighting angle is different B. Gingival and incisal portions have different fluorescent qualities C. Gingival area has a dentine background D. Incident light is different

Last Answer : C. Gingival area has a dentine background

All of the following should be considered for systemic antibiotic except: A. Extraction of tooth with acute dento alveolar abscess B. Necrotic ulcerative gingivitis (ANUG) unless it is acute. C. Extraction of 38 or 48 with acute pericoronitis D. Full mouth extraction for a patient with perio disease

Description : All of the following should be considered for systemic antibiotic except: A. Extraction of tooth with acute dento alveolar abscess B. Necrotic ulcerative gingivitis (ANUG) unless it is acute. C. ... of 38 or 48 with acute pericoronitis D. Full mouth extraction for a patient with perio disease

Last Answer : B. Necrotic ulcerative gingivitis (ANUG) unless it is acute.

After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Description : After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Last Answer : A. Occlusal height

How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Description : How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Last Answer : C. 2mm

For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Description : For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Last Answer : A. reduce cusp by 2mm on a flat base for more resistance

When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be performed because it might damage the adjacent tooth C. When extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Description : The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Last Answer : E. All of the above

In RCT the ideal root filling: A. Ends at the apex B. Extends beyond apex to achieve a good seal C. Ends at the dentino-cemental junction

Description : In RCT the ideal root filling: A. Ends at the apex B. Extends beyond apex to achieve a good seal C. Ends at the dentino-cemental junction

Last Answer : C. Ends at the dentino-cemental junction

Marginal leakage at the proximal gingival cavosurface of a recently restored class II can be caused by: I. Insufficient condensation II. First proximal increment was too large III. Neglecting to wedge the matrix IV. Hand manipulation instead of mechanical V. Debris contamination A. I, II, III B. II, III, IV C. I, II, V D. None of the above E. All of the above

Description : Marginal leakage at the proximal gingival cavosurface of a recently restored class II can be caused by: I. Insufficient condensation II. First proximal increment was too large III. Neglecting to wedge the matrix IV. Hand ... III, IV C. I, II, V D. None of the above E. All of the above

Last Answer : C. I, II, V

In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. Reproduction of normal tooth incline in the gingival one third of the crown C. Slight over contouring of the tooth in the gingival one fifth of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Description : In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. ... of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Last Answer : B. Reproduction of normal tooth incline in the gingival one third of the crown

for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Description : for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Last Answer : C. diet must contain simple carbohydrate

Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Description : Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Last Answer : B. Surface demineralisation and hypo mineralisation

Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding materials C. Is not a safe and simple method of bonding D. Bonding fails to produce a highly significant retention and good marginal integrity and clinical durability E. None of the above

Description : Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding ... highly significant retention and good marginal integrity and clinical durability E. None of the above

Last Answer : A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material

Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Description : Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Last Answer : A. Enamel

Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Description : Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Last Answer : B. Dentine and cementum

For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Description : For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Last Answer : C. Diet must contain simple carbohydrate

For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Description : For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Last Answer : A. Avoid buccal pulp horn

In class II preparation it is difficult to place the gingival seat when preparation is extended too gingivally because the: A. Enamel rods are directed occlusally B. Marked cervical constriction

Description : In class II preparation it is difficult to place the gingival seat when preparation is extended too gingivally because the: A. Enamel rods are directed occlusally B. Marked cervical constriction

Last Answer : B. Marked cervical constriction

The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Description : The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Last Answer : C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred

At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Description : At what angle to the external surface should proximal cavosurface walls in Class II preparation for the reception of an amalgam filling be finished: A. Acute angle B. Right angle C. Obtuse angle D. 45 angle

Last Answer : C. Obtuse angle

Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent formation of an “overhang” D. Provide adequate physiological contour for the proximal surface E. Provide an acceptable surface texture to the proximal surface F. All of the above

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Description : Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Last Answer : B. Plaque accumulation is less than with lingual plate

In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Description : In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Last Answer : A. The wider the gap the better the chance of secondary caries

Which of the following statement about the defective margins of amalgam restorations is true?+M07 A. The larger the breakdown, the greater the chance of decay. IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES ALONG MARGIN So the ans is Chances are increased

Description : Which of the following statement about the defective margins of amalgam restorations is true?+M07 A. The larger the breakdown, the greater the chance of decay. IF THERE IS MARGINAL BREAKDOWN THIS DOSNT NECESSITATE THE PRESENCE OF CARIES ALONG MARGIN So the ans is Chances are increased

Last Answer : A. The larger the breakdown, the greater the chance of decay.

The junction between primary and secondary dentine is,*** A. A reversal line B. Sharp curvature C. A resting line D. A reduction in the number of tubules

Description : The junction between primary and secondary dentine is,*** A. A reversal line B. Sharp curvature C. A resting line D. A reduction in the number of tubules

Last Answer : B. Sharp curvature