Hypoplasia as seen in x rays:** A. Thick enamel surface B. Thin enamel surface C. Sometimes large pulp chamber D. Can not be detected on X rays

Hypoplasia as seen in x rays:**
A. Thick enamel surface
B. Thin enamel surface
C. Sometimes large pulp chamber
D. Can not be detected on X rays
by

1 Answer

Answer :

D. Can not be detected on X rays
by

Related questions

On Xray hypoplasia of enamel is ( the enamel is thinner) A. radioluscent B. radiopaque C. can’t detect D. sometimes radiopaque, sometimes radioluscent

Description : On Xray hypoplasia of enamel is ( the enamel is thinner) A. radioluscent B. radiopaque C. can’t detect D. sometimes radiopaque, sometimes radioluscent

Last Answer : C. can’t detect

A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Description : A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Last Answer : C. Dentinogenesis imperfecta

Caries which is close to the pulp chamber; on x rays you find ‘dens in dente’; the right treatment is: A. Zinc oxide eugenol cement and amalgam B. Pulpectomy C. Pulpotomy D. Calcium hydroxide on pulp and amalgam

Description : Caries which is close to the pulp chamber; on x rays you find ‘dens in dente’; the right treatment is: A. Zinc oxide eugenol cement and amalgam B. Pulpectomy C. Pulpotomy D. Calcium hydroxide on pulp and amalgam

Last Answer : B. Pulpectomy

Which of the following anomalies occurs during the initiation and proliferation stages of tooth development A. Amelogenesis imperfecta (developmental defect) B. Dentinogenesis imperfecta (developmental defect) C. Enamel hypoplasia (AI type) D. Oligodontia E. Ankylosis

Description : Which of the following anomalies occurs during the initiation and proliferation stages of tooth development A. Amelogenesis imperfecta (developmental defect) B. Dentinogenesis imperfecta (developmental defect) C. Enamel hypoplasia (AI type) D. Oligodontia E. Ankylosis

Last Answer : D. Oligodontia

The difference between deciduous and permanent teeth is: A. Deciduous teeth have a higher pulp horns and larger pulp chambers B. Deciduous teeth have flatter contact areas C. Deciduous teeth have thinner enamel surface D. All of the above

Description : The difference between deciduous and permanent teeth is: A. Deciduous teeth have a higher pulp horns and larger pulp chambers B. Deciduous teeth have flatter contact areas C. Deciduous teeth have thinner enamel surface D. All of the above

Last Answer : D. All of the above

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Description : for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Last Answer : C. diet must contain simple carbohydrate

Where is the narrowest part of the pulp: A. At the radiographic apex B. At the dentino-enamel junction C. At the orifices

Description : Where is the narrowest part of the pulp: A. At the radiographic apex B. At the dentino-enamel junction C. At the orifices

Last Answer : A. At the radiographic apex

Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Description : Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Last Answer : A. Small pulp chambers and root canals, normal enamel

Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Description : Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Last Answer : A. Enamel

For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Description : For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Last Answer : C. Diet must contain simple carbohydrate

For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Description : For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Last Answer : A. Avoid buccal pulp horn

After the initial development stage and in the absence of pathology, the size of the pulp chamber has been reduced by, A. Deposition of primary dentine B. Deposition of secondary dentine C. Reparative dentine D. Pulp fibrosis E. Deposition of reparative dentine

Description : After the initial development stage and in the absence of pathology, the size of the pulp chamber has been reduced by, A. Deposition of primary dentine B. Deposition of secondary dentine C. Reparative dentine D. Pulp fibrosis E. Deposition of reparative dentine

Last Answer : B. Deposition of secondary dentine

To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in addition to the direction of individual root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Description : To achieve optimum cavity preparation, which of the following factors of internal anatomy must be considered in root canal treatment: A. Outline form B. The age and shape of pulp chamber; in ... root canals. C. Internal external relationship D. Intra-coronal preparation E. None of the above

Last Answer : B. The age and shape of pulp chamber; in addition to the direction of individual root canals.

The size of the pulp chamber within the tooth is influenced by: A. Age B. Parafunctional C. History of the tooth /abrasion, erosion, caries/ D. All of the above

Description : The size of the pulp chamber within the tooth is influenced by: A. Age B. Parafunctional C. History of the tooth /abrasion, erosion, caries/ D. All of the above

Last Answer : D. All of the above

How do you prepare the floor of pulp chamber in molars: A. Swab and dry with cotton wool and excavate B. Use round bur to flatten the floor C. Under cut walls D. Use flat end fissure bur to make it levelled

Description : How do you prepare the floor of pulp chamber in molars: A. Swab and dry with cotton wool and excavate B. Use round bur to flatten the floor C. Under cut walls D. Use flat end fissure bur to make it levelled

Last Answer : A. Swab and dry with cotton wool and excavate

.In which situation is the translucency of a tooth lost:CHECK A. Death of the pulp B. Complete calcification of pulp chamber C. Hyperaemia D. Pulp stone E. All of the above

Description : .In which situation is the translucency of a tooth lost:CHECK A. Death of the pulp B. Complete calcification of pulp chamber C. Hyperaemia D. Pulp stone E. All of the above

Last Answer : E. All of the above

A 9 years-old boy has a small white discolouration on his maxillary central incisor. The lesion is most probably, A. Hypocalcification due to trauma of the primary predecessor B. Hypoplasia due to acute systemic infection when 6-12 months old C. Defect during the histo differentiation stage of development D. Defect during the morho differentiation stage of development

Description : A 9 years-old boy has a small white discolouration on his maxillary central incisor. The lesion is most probably, A. Hypocalcification due to trauma of the primary predecessor B ... the histo differentiation stage of development D. Defect during the morho differentiation stage of development

Last Answer : A. Hypocalcification due to trauma of the primary predecessor

A patient suffers a blow to his maxillary central incisor without resulting in fracture. The pulp may: A. Show immediate necrosis B. Become non-vital but only if treatment is delayed too long C. Become non vital irrespective of treatment D. No changes are seen later if fracture does not occur

Description : A patient suffers a blow to his maxillary central incisor without resulting in fracture. The pulp may: A. Show immediate necrosis B. Become non-vital but only if treatment is delayed too long C. Become non vital irrespective of treatment D. No changes are seen later if fracture does not occur

Last Answer : C. Become non vital irrespective of treatment

The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material

Description : The main purpose of finishing the enamel walls is, A. Remove loose enamel rods B. Provide a better surface for the adoption of restorative material

Last Answer : A. Remove loose enamel rods

Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Description : Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Last Answer : B. Surface demineralisation and hypo mineralisation

Why do you itch enamel for composite restorations: A. To increase surface area B. To decrease surface area C. Does not really change the surface area D. Increase the chemical bonding capability E. Decrease the chemical bonding capability

Description : Why do you itch enamel for composite restorations: A. To increase surface area B. To decrease surface area C. Does not really change the surface area D. Increase the chemical bonding capability E. Decrease the chemical bonding capability

Last Answer : A. To increase surface area

The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Description : The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Last Answer : A. Perpendicular to the outer surface of the tooth

The effectiveness of the acid etch is dependent on which of the following factors: A. Material must be used to clean the surface of the tooth prior to etching B. The effectiveness of the itchant C. The chemical and physical nature of the tooth D. The area and surface of the enamel to be itched

Description : The effectiveness of the acid etch is dependent on which of the following factors: A. Material must be used to clean the surface of the tooth prior to etching B. The effectiveness of the itchant C. The chemical and physical nature of the tooth D. The area and surface of the enamel to be itched

Last Answer : C. The chemical and physical nature of the tooth

In regard to the enamel surface: A. It is a perfect substance for bonding B. It does not conform to the bonding requirements C. It is the most inorganic, rough part D. It is free from contamination and roughness E. None of the above

Description : In regard to the enamel surface: A. It is a perfect substance for bonding B. It does not conform to the bonding requirements C. It is the most inorganic, rough part D. It is free from contamination and roughness E. None of the above

Last Answer : B. It does not conform to the bonding requirements

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Description : Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Last Answer : B. Dentine and cementum

the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio–Lingual in upper first molars B. Mesio–Buccal in upper first molars C. Disto–buccal in lower first molars D. Mesio–Lingual in lower first molars E. Mesio- Buccal in lower first molar

Description : the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio-Lingual in upper first molars B. Mesio-Buccal in ... first molars D. Mesio-Lingual in lower first molars E. Mesio- Buccal in lower first molar

Last Answer : B. Mesio–Buccal in upper first molars

An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the following should be considered? a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide. b- Place calcium hydroxide directly on the exposed pulp. c- Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Description : An 8 years-old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed presents for treatment three hours after injury. Which of the ... - Pulpotomy using formocresol. d- Pulpectomy and immediate root filling. e- Pulpectomy and apexification.

Last Answer : a- Remove the surface 1. 2 mm of pulp tissue and place calcium hydroxide

Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as ….What is complicated by): A. The mesial concavity of the root surface B. Small lingual pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Description : Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as .What is complicated by): A. The mesial concavity of the root ... pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Last Answer : A. The mesial concavity of the root surface

8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the following should be considered? M07*********** A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis) B. Place calcium hydroxide directly on the exposed pulp C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Description : 8 years old child who has sustained a fracture of maxillary permanent central incisor in which 2mm of the pulp is exposed; presents for treatment three hours after injury. Which of the ... C. Pulpotomy using formocresol D. Pulpectomy and immediate root filling E. Pulpectomy and apexification

Last Answer : A. Remove the surface 1-2 mm of pulp tissue and place calcium hydroxide (Cvek pulpotomy, apexogenesis)

The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Description : The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Last Answer : B. 50%

Proximal caries on x-rays appears: A. Smaller than clinically seen B. Larger than clinically seen C. The same

Description : Proximal caries on x-rays appears: A. Smaller than clinically seen B. Larger than clinically seen C. The same

Last Answer : A. Smaller than clinically seen

Which one of the following statement is correct, A. The remnants of Ameloblast contribute to the primary enamel cuticle B. the last secretion of the odontoblast is cementum X C. The last secretion of the ameloblast is the acquired of enamel cuticle D. The remnants of odontoblast form the primary enamel cuticle

Description : Which one of the following statement is correct, A. The remnants of Ameloblast contribute to the primary enamel cuticle B. the last secretion of the odontoblast is cementum X C. The ... ameloblast is the acquired of enamel cuticle D. The remnants of odontoblast form the primary enamel cuticle

Last Answer : A. The remnants of Ameloblast contribute to the primary enamel cuticle

The lamina dura is seen on periapical radiographs as:CHECK A. Usual radiolucency between tooth root and surrounding bone as a thin white line. B. Cribriform plate of bone making the tooth socket C. Dense crestal bone consistent with a healthy periodontal status D. Pattern of radiopaque lines in supporting alveolar bone

Description : The lamina dura is seen on periapical radiographs as:CHECK A. Usual radiolucency between tooth root and surrounding bone as a thin white line. B. Cribriform plate of bone making the ... bone consistent with a healthy periodontal status D. Pattern of radiopaque lines in supporting alveolar bone

Last Answer : B. Cribriform plate of bone making the tooth socket

An upper deciduous molar has a caries exposure and on X ray the corresponding 2nd permanent premolar is absent. What treatment would you do to the deciduous tooth: A. Pulpotomy B. Endodontic treatment C. Pulp capping

Description : An upper deciduous molar has a caries exposure and on X ray the corresponding 2nd permanent premolar is absent. What treatment would you do to the deciduous tooth: A. Pulpotomy B. Endodontic treatment C. Pulp capping

Last Answer : B. Endodontic treatment

Why is my hair sometimes quite thick, and at other times seems thin?

Description : Why is my hair sometimes quite thick, and at other times seems thin?

Last Answer : Not a phenomenon at all, perfectly natural for the treatment and maintenance of your hair. For instance more than likely it's currently dry or it's naturally frizzy but thin when wet. This is ... interference, or vice versa, then I too would like an explanation (unless it's simply static friction)

I cheer you up when someone or something hurts you. You're satisfied by the way treat you. I'm there for you through thick and thin. Even when you're down, sometimes I'm there all year round. What am I? -Riddles

Description : I cheer you up when someone or something hurts you. You're satisfied by the way treat you. I'm there for you through thick and thin. Even when you're down, sometimes I'm there all year round. What am I? -Riddles

Last Answer : Cake.

“Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Description : “Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Last Answer : B. Contamination at the porcelain metal interface

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Last Answer : B. You extend your preparation and clean it

Which rotary instrument gives the smoothest enamel cut? a. carborundum stone (green stone) b. aluminum oxide stone (white stone) c. plain fissure bur d. cross-cut fissure bur e. medium diamond bur (great efficiency but roughest cut)

Description : Which rotary instrument gives the smoothest enamel cut? a. carborundum stone (green stone) b. aluminum oxide stone (white stone) c. plain fissure bur d. cross-cut fissure bur e. medium diamond bur (great efficiency but roughest cut)

Last Answer : c. plain fissure bur

The final deposition of ameloblasts occurs in:** A. Primary enamel cuticle B. Secondary enamel cuticle C. Acquired enamel cuticle D. Cementum

Description : The final deposition of ameloblasts occurs in:** A. Primary enamel cuticle B. Secondary enamel cuticle C. Acquired enamel cuticle D. Cementum

Last Answer : A. Primary enamel cuticle

During teeth eruption, the reduced enamel epithelium merges with the oral epithelium. What is the further development? A. Downgrowth of oral epithelium which replaces the reduced enamel epithelium B. Proliferation of inner enamel epithelium C. Proliferation of outer enamel epithelium D. Down growth of oral epithelium which undermines the reduced enamel epithelium E. Gradual transformation of the reduced enamel epithelium

Description : During teeth eruption, the reduced enamel epithelium merges with the oral epithelium. What is the further development? A. Downgrowth of oral epithelium which replaces the reduced enamel ... which undermines the reduced enamel epithelium E. Gradual transformation of the reduced enamel epithelium

Last Answer : E. Gradual transformation of the reduced enamel epithelium

Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding materials C. Is not a safe and simple method of bonding D. Bonding fails to produce a highly significant retention and good marginal integrity and clinical durability E. None of the above

Description : Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding ... highly significant retention and good marginal integrity and clinical durability E. None of the above

Last Answer : A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material

Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Description : Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Last Answer : C. Epithelium trapped after sutures

In class II preparation it is difficult to place the gingival seat when preparation is extended too gingivally because the: A. Enamel rods are directed occlusally B. Marked cervical constriction

Description : In class II preparation it is difficult to place the gingival seat when preparation is extended too gingivally because the: A. Enamel rods are directed occlusally B. Marked cervical constriction

Last Answer : B. Marked cervical constriction