What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

What is the main purpose of using Stress breakers:
A. To distribute the load between teeth and ridges
B. To distribute the load between the clasps and the face end of the saddle
C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength
by

1 Answer

Answer :

C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength
by

Related questions

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of abutment towards the marginal ridge D. Be concave E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Description : To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of ... E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Last Answer : B. Slope from the marginal ridge towards contact?? of abutment

Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Description : Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Last Answer : A. Distribute the occlusal load

Ante’s Law: Dr. Ante in 1926 stated that, A. “The combined pericemental area of the abutment teeth should be equal to or greater than pericemental area than tooth or teeth to be replaced”

Description : Ante’s Law: Dr. Ante in 1926 stated that, A. “The combined pericemental area of the abutment teeth should be equal to or greater than pericemental area than tooth or teeth to be replaced”

Last Answer : A. “The combined pericemental area of the abutment teeth should be equal to or greater than pericemental area than tooth or teeth to be replaced”

To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Last Answer : B. Use mucco-compressive impression

What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Last Answer : A. Gingival /Below/

Tooth under occlusal trauma may show: A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation E. All of the above

Description : Tooth under occlusal trauma may show: A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation E. All of the above

Last Answer : E. All of the above

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with conventional complete denture C. Alveolar bone resorption is reduced D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

The OPTIMUM crown to root ratio for abutment tooth is:** A. 2:3 B. 1:1

Description : The OPTIMUM crown to root ratio for abutment tooth is:** A. 2:3 B. 1:1

Last Answer : A. 2:3

After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask patient to bite firmly while impression is setting B. Hold the metal base frame against the abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

In cementing Maryland or Roche bridges, the effect is generally to, a. Lighten the colour of the teeth by the opacity of the cement b. Darken the colour of the abutment by the presence of metal on the lingual c. Have no detrimental colour effect. d. Darken the abutment teeth by incisal metal coverage

Description : In cementing Maryland or Roche bridges, the effect is generally to, a. Lighten the colour of the teeth by the opacity of the cement b. Darken the colour of the abutment by the presence ... lingual c. Have no detrimental colour effect. d. Darken the abutment teeth by incisal metal coverage

Last Answer : c. Have no detrimental colour effect.

What is Ante’s Law about, A. The relation between the span of the bridge and the pontics B. The periodontal area of the abutment teeth C. The relation between the length of the root and the abutment.

Description : What is Ante’s Law about, A. The relation between the span of the bridge and the pontics B. The periodontal area of the abutment teeth C. The relation between the length of the root and the abutment.

Last Answer : B. The periodontal area of the abutment teeth

Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support of the distal extension D. Clasping at least two teeth for each edentulous area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension

Description : Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support ... area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension

Last Answer : C. Maintaining tissue support of the distal extension

An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Last Answer : B. Contact the tooth under the survey line

What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Last Answer : E. None of the above

Reconstructing the occlusal anatomy is based on: A. Functional factors B. Depth of restoration on a tooth C. Necessity to restore normal anatomy

Description : Reconstructing the occlusal anatomy is based on: A. Functional factors B. Depth of restoration on a tooth C. Necessity to restore normal anatomy

Last Answer : A. Functional factors

A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Description : A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Last Answer : E. All of the above

The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Description : The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Last Answer : A. Elimination of plaque and calculus

the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Description : the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Last Answer : B. The occlusal convergence of the deciduous teeth

When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Description : When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Last Answer : D. Wrought gold

Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Description : Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Last Answer : . The occlusal concavity of deciduous teeth

When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Description : When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Last Answer : A. Increase the compensatory curve

When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Last Answer : B. Decreasing the angle orientation of the occlusal plane

The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Description : The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Last Answer : A. Away from edentulous space

Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Description : Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Description : The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Last Answer : B. Mesially

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Description : Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Last Answer : B. A guide used to orient the occlusal plane

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

The principal factor involved in oral para-function is related to: A. Periods of stress B. Occlusal pre-maturities during mandibular closure

Description : The principal factor involved in oral para-function is related to: A. Periods of stress B. Occlusal pre-maturities during mandibular closure

Last Answer : B. Occlusal pre-maturities during mandibular closure

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness

Patient with class II division II; the lateral incisor is missing. You want to make a fixed bridge which of the following is suitable: A. Rocket bridge using central incisor as abutment (rochette bridge resin retained bridge parecido al Maryland B. Cantilever using central incisor C. Fixed bridge using the central incisor and bicuspid

Description : Patient with class II division II; the lateral incisor is missing. You want to make a fixed bridge which of the following is suitable: A. Rocket bridge using central incisor as abutment ( ... al Maryland B. Cantilever using central incisor C. Fixed bridge using the central incisor and bicuspid

Last Answer : B. Cantilever using central incisor

What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Description : What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Last Answer : A. Obtain baseline response

The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above

Description : The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above

Last Answer : Answer: Option D

The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Description : The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Last Answer : (d) All of the above.

Gemination is: a. Division of single tooth, twining. b. Fusion of two or more crowns of teeth c. Fusion of two or more roots.

Description : Gemination is: a. Division of single tooth, twining. b. Fusion of two or more crowns of teeth c. Fusion of two or more roots.

Last Answer : a. Division of single tooth, twining.

As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve. c- Prophylactic prescription of dexamethasone will dramatically reduce post operative swelling. d- Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root. e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual ... e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve.

As a result of wrong use of tooth brush the patients MOST probable complaint will be, A. Spontaneous pain or discomfort B. Occasional pain during brushing of the teeth C. Occasional pain during consumption of sweets

Description : As a result of wrong use of tooth brush the patients MOST probable complaint will be, A. Spontaneous pain or discomfort B. Occasional pain during brushing of the teeth C. Occasional pain during consumption of sweets

Last Answer : C. Occasional pain during consumption of sweets

What control tooth or teeth should be used when testing a suspected pulpally involved tooth: A. Adjacent tooth and contralateral teeth B. Contralateral and opposing teeth C. Opposing and adjacent teeth D. Test only suspected tooth/teeth E. All of the above

Description : What control tooth or teeth should be used when testing a suspected pulpally involved tooth: A. Adjacent tooth and contralateral teeth B. Contralateral and opposing teeth C. Opposing and adjacent teeth D. Test only suspected tooth/teeth E. All of the above

Last Answer : A. Adjacent tooth and contralateral teeth

10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Description : 10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Last Answer : C. The remaining teeth in the mouth

The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Description : The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Last Answer : A. Perpendicular to the outer surface of the tooth

Gemination is:** A. Division of single tooth, twining B. Fusion of two or more crowns of teeth C. Fusion of two or more roots

Description : Gemination is:** A. Division of single tooth, twining B. Fusion of two or more crowns of teeth C. Fusion of two or more roots

Last Answer : A. Division of single tooth, twining

Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Description : Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Last Answer : E. All of the above