The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal  view is positioned:**
A. Distally
B. Mesially
by

1 Answer

Answer :

B. Mesially
by

Related questions

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

The palatal pulp horn of maxillary molars is located: A. In the pulpchamber under mesiolingual cusp B. In the pulpchamber opposite the mesio distal fissure of the buccal cusp C. Under the disto lingual cusp

Description : The palatal pulp horn of maxillary molars is located: A. In the pulpchamber under mesiolingual cusp B. In the pulpchamber opposite the mesio distal fissure of the buccal cusp C. Under the disto lingual cusp

Last Answer : A. In the pulpchamber under mesiolingual cusp

A patient with impacted canine; by moving the X ray tube distally the canine moves distally too; where do you expect the impacted canine: A. Labially impacted B. Palatally impacted Eighty-five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Description : A patient with impacted canine; by moving the X ray tube distally the canine moves distally too; where do you expect the impacted canine: A. Labially impacted B. Palatally impacted ... -five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Last Answer : B. Palatally impacted Eighty-five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Description : Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Description : The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Last Answer : GA.Parallel to occlusal plane

Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as ….What is complicated by): A. The mesial concavity of the root surface B. Small lingual pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Description : Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as .What is complicated by): A. The mesial concavity of the root ... pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Last Answer : A. The mesial concavity of the root surface

In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Description : In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Last Answer : B. Slightly done undercut of the buccal and lingual wall

When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Last Answer : B. Decreasing the angle orientation of the occlusal plane

The first molars are extracted in both arches: A. The bone resorption will be the same for both arches B. Resorption is more on the palatal side of maxillary molars C. Resorption is more on lingual side of mandibular molars D. The ridge height resorbs more in maxilla than mandible

Description : The first molars are extracted in both arches: A. The bone resorption will be the same for both arches B. Resorption is more on the palatal side of maxillary molars C. Resorption is more on lingual side of mandibular molars D. The ridge height resorbs more in maxilla than mandible

Last Answer : C. Resorption is more on lingual side of mandibular molars

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

The MOST stable area to evaluate the craniofacial growth is: A. Nasal floor B. Cranial vault C. Occlusal plane D. Naso maxillary complex E. Anterior cranial base

Description : The MOST stable area to evaluate the craniofacial growth is: A. Nasal floor B. Cranial vault C. Occlusal plane D. Naso maxillary complex E. Anterior cranial base

Last Answer : E. Anterior cranial base

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

To increase the stability of the lower denture, A. The occlusal plane should be below the tongue B. The occlusal plane should be above the tongue C. The lingual flanges should be concave

Description : To increase the stability of the lower denture, A. The occlusal plane should be below the tongue B. The occlusal plane should be above the tongue C. The lingual flanges should be concave

Last Answer : A. The occlusal plane should be below the tongue

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

The extraction of maxillary deciduous molar in 5 years old child; you should use: A. Mostly towards the apex pressure and some movement B. Rotation C. Distal pressure and movement D. Labial-lingual movement

Description : The extraction of maxillary deciduous molar in 5 years old child; you should use: A. Mostly towards the apex pressure and some movement B. Rotation C. Distal pressure and movement D. Labial-lingual movement

Last Answer : D. Labial-lingual movement

In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Description : In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Last Answer : A. Reduced Overjet of posterior teeth

What is CORRECT in regard to the periodontal surface area in mandibular teeth: A. First molar> first premolar> second premolar (max) B. Canine> first premolar> second premolar. (max) C. Canine> lateral incisor> central incisor

Description : What is CORRECT in regard to the periodontal surface area in mandibular teeth: A. First molar> first premolar> second premolar (max) B. Canine> first premolar> second premolar. (max) C. Canine> lateral incisor> central incisor

Last Answer : C. Canine> lateral incisor> central incisor

When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors C. Smaller connectors which connect denture components to the major connector D. The components of the denture base which provides reciprocation

Description : When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors ... components to the major connector D. The components of the denture base which provides reciprocation

Last Answer : C. Smaller connectors which connect denture components to the major connector

On examination of an 8 years-old child you find 75 with carious exposure. On X-ray you find 35 missing. Your treatment is: A. Extraction of 75 allowing 36 to move mesially B. Pulpotomy on 75 and wait indefinitely C. Extraction of 75 and place a fixed space retainer to be replaced with fixed bridge. D. Extraction of 65 and 75

Description : On examination of an 8 years-old child you find 75 with carious exposure. On X-ray you find 35  missing. Your treatment is:  A. Extraction of 75 allowing 36 to move mesially  B. ... of 75 and place a fixed space retainer to be replaced with fixed bridge. D. Extraction of 65 and 75 

Last Answer : B. Pulpotomy on 75 and wait indefinitely  

What of the following is TRUE regarding the placement of the movable component of the non-rigid connector in a fixed bridge: A. Should be placed on the longer retainer B. Mesial drift causes unseating of the distally placed connector What of the following is TRUE regarding the placement of the movable component of the non-rigid connector in a fixed bridge: A. Should be placed on the longer retainer B. Mesial drift causes unseating of the distally placed connector

Description : What of the following is TRUE regarding the placement of the movable component of the non-rigid connector in a fixed bridge: A. Should be placed on the longer retainer B. Mesial drift causes unseating of the distally placed connector

Last Answer : B. Mesial drift causes unseating of the distally placed connector

Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Description : Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Last Answer : . The occlusal concavity of deciduous teeth

the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Description : the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Last Answer : B. The occlusal convergence of the deciduous teeth

When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Description : When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Last Answer : A. Increase the compensatory curve

The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Description : The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Last Answer : A. Away from edentulous space

Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Description : Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Last Answer : A. Distribute the occlusal load

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Description : What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Last Answer : C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

The hamular notch is important in full denture construction because it aids in the setting position of the artificial teeth A. First statement is true, but the reason given is false B. Both statements are true C. Both statements are untrue

Description : The hamular notch is important in full denture construction because it aids in the setting position of the artificial teeth A. First statement is true, but the reason given is false B. Both statements are true C. Both statements are untrue

Last Answer : A. First statement is true, but the reason given is false

Maxillary central incisor located palatally causes : a. Prolong stay of primary central incisor. b. Supernumerary teeth.

Description : Maxillary central incisor located palatally causes : a. Prolong stay of primary central incisor. b. Supernumerary teeth.

Last Answer : a. Prolong stay of primary central incisor.

As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve. c- Prophylactic prescription of dexamethasone will dramatically reduce post operative swelling. d- Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root. e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual ... e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve.

In cementing Maryland or Roche bridges, the effect is generally to, a. Lighten the colour of the teeth by the opacity of the cement b. Darken the colour of the abutment by the presence of metal on the lingual c. Have no detrimental colour effect. d. Darken the abutment teeth by incisal metal coverage

Description : In cementing Maryland or Roche bridges, the effect is generally to, a. Lighten the colour of the teeth by the opacity of the cement b. Darken the colour of the abutment by the presence ... lingual c. Have no detrimental colour effect. d. Darken the abutment teeth by incisal metal coverage

Last Answer : c. Have no detrimental colour effect.

18 years old female weighting 52Kg and 163cm tall. On dental examination erosion of teeth on the most of her lingual surfaces is clearly showing. Dietary history revealed a daily rate of 5000 to 7000 Kcal/day. What is the most probable diagnosis? A. Alcoholism B. Drug abuse C. Bulimia D. Excessive smoking E. Diabetic mellitus type I

Description : 18 years old female weighting 52Kg and 163cm tall. On dental examination erosion of teeth on the most of her lingual surfaces is clearly showing. Dietary history revealed a daily rate of 5000 to 7000 ... . Alcoholism B. Drug abuse C. Bulimia D. Excessive smoking E. Diabetic mellitus type I

Last Answer : C. Bulimia

A 7 years-old child has class I malocclusion, slight version of maxillary class III, adequate arch length. What is your management: A. Oral screen B. Head cap therapy C. Inclined plane on mandibular anterior teeth D. Hawley plate E. Expansion screw plate

Description : A 7 years-old child has class I malocclusion, slight version of maxillary class III, adequate arch length. What is your management: A. Oral screen B. Head cap therapy C. Inclined plane on mandibular anterior teeth D. Hawley plate E. Expansion screw plate

Last Answer : C. Inclined plane on mandibular anterior teeth

The concomitant perio-periapical lesion as the cause of endodontic failure: A. Cannot be discovered prior to endo treatment B. May be discovered prior to endo treatment C. Is most commonly found in maxillary teeth D. Is most commonly found in mandibular teeth E. None of the above

Description : The concomitant perio-periapical lesion as the cause of endodontic failure: A. Cannot be discovered prior to endo treatment B. May be discovered prior to endo treatment C. Is most commonly found in maxillary teeth D. Is most commonly found in mandibular teeth E. None of the above

Last Answer : B. May be discovered prior to endo treatment

Most congenitally missing teeth are: A. Mandibular 3rd molars B. Mandibular 2nd premolars C. Maxillary lateral incisor

Description : Most congenitally missing teeth are: A. Mandibular 3rd molars B. Mandibular 2nd premolars C. Maxillary lateral incisor

Last Answer : A. Mandibular 3rd molars

A 37 years-old patient presents with paroxysmal pain on the left eye that he thinks is related to his maxillary posterior teeth. The pain comes in recurrent bursts and is aggravated by stress and alcohol. Oral exam is negative. The probable diagnosis is: A. Migraine B. Cluster headache C. Trigeminal neuralgia D. Temporal neuritis

Description : A 37 years-old patient presents with paroxysmal pain on the left eye that he thinks is related to his maxillary posterior teeth. The pain comes in recurrent bursts and is aggravated by stress and ... diagnosis is: A. Migraine B. Cluster headache C. Trigeminal neuralgia D. Temporal neuritis

Last Answer : B. Cluster headache

The maxillary and mandibular teeth get their blood supply from:** A. Separate branches of S. Palatina artery B. Separate branches of maxillary artery C. Branches of maxillary and mandibular arteries

Description : The maxillary and mandibular teeth get their blood supply from:** A. Separate branches of S. Palatina artery B. Separate branches of maxillary artery C. Branches of maxillary and mandibular arteries

Last Answer : B. Separate branches of maxillary artery

Maxillary central incisor located palatally causes : A. Prolonged stay of primary central incisor B. Supernumerary teeth

Description : Maxillary central incisor located palatally causes : A. Prolonged stay of primary central incisor B. Supernumerary teeth

Last Answer : A. Prolonged stay of primary central incisor

To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Last Answer : B. Use mucco-compressive impression

Which primary teeth are LEAST affected with the nursing bottle syndrome? A. Maxillary molars B. Maxillary and mandibular canines C. Mandibular incisors D. Maxillary incisors E. Mandibular molars

Description : Which primary teeth are LEAST affected with the nursing bottle syndrome? A. Maxillary molars B. Maxillary and mandibular canines C. Mandibular incisors D. Maxillary incisors E. Mandibular molars

Last Answer : C. Mandibular incisors

As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve ADC M07 C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling D. Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising ... root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling

The best method to take X-ray of the maxillary sinus is, A. Periapical radiograph B. Panoramic view C. Lateral cephaloghraph D. Occipitomental view E. Reverse Towne’s view

Description : The best method to take X-ray of the maxillary sinus is, A. Periapical radiograph B. Panoramic view C. Lateral cephaloghraph D. Occipitomental view E. Reverse Towne’s view

Last Answer : D. Occipitomental view

The best radiograph for maxillary sinus is: A. PA skull x ray B. Occipitomental radiograph o waters view C. Town’s view The best radiograph for maxillary sinus is: A. PA skull x ray B. Occipitomental radiograph o waters view C. Town’s view

Description : The best radiograph for maxillary sinus is: A. PA skull x ray B. Occipitomental radiograph o waters view C. Town’s view

Last Answer : B. Occipitomental radiograph o waters view

If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Last Answer : b.parallel to the nearest external surface

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form