Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Splinting the adjacent teeth in fixed bridge is primarily done to:
A. Distribute the occlusal load
B. Achieve better retention
by

1 Answer

Answer :

A. Distribute the occlusal load
by

Related questions

What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Description : What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Last Answer : C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Description : The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Last Answer : A. Away from edentulous space

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with conventional complete denture C. Alveolar bone resorption is reduced D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

Angular type of bone resorption can be seen more often in:** A. Occlusal traumatism B. Food particles retention C. Periodontosis D. All of the above

Description : Angular type of bone resorption can be seen more often in:** A. Occlusal traumatism B. Food particles retention C. Periodontosis D. All of the above

Last Answer : D. All of the above

In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Description : In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Last Answer : B. Assure predictable clasp retention

When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Last Answer : B. Decreasing the angle orientation of the occlusal plane

A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Description : A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Last Answer : E. All of the above

When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be performed because it might damage the adjacent tooth C. When extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Description : Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Last Answer : . The occlusal concavity of deciduous teeth

the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Description : the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Last Answer : B. The occlusal convergence of the deciduous teeth

When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Description : When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Last Answer : A. Increase the compensatory curve

Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Description : Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Description : The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Last Answer : B. Mesially

You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Description : You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Last Answer : A. Incorporating mesh work in wax pattern

What does not show in Cleidocranial dysplasia:** A. Defective formation of clavicles B. Delayed closure of fontanelles C. Retention of maxilla D. Delayed eruption of permanent teeth E. None of the above

Description : What does not show in Cleidocranial dysplasia:** A. Defective formation of clavicles B. Delayed closure of fontanelles C. Retention of maxilla D. Delayed eruption of permanent teeth E. None of the above

Last Answer : E. None of the above

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

What control tooth or teeth should be used when testing a suspected pulpally involved tooth: A. Adjacent tooth and contralateral teeth B. Contralateral and opposing teeth C. Opposing and adjacent teeth D. Test only suspected tooth/teeth E. All of the above

Description : What control tooth or teeth should be used when testing a suspected pulpally involved tooth: A. Adjacent tooth and contralateral teeth B. Contralateral and opposing teeth C. Opposing and adjacent teeth D. Test only suspected tooth/teeth E. All of the above

Last Answer : A. Adjacent tooth and contralateral teeth

10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Description : 10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Last Answer : C. The remaining teeth in the mouth

A mandibular permanent first molar has to be extracted, this will affect: A. Adjacent teeth B. Teeth in the same quadrant C. Both arches the same side D. Full mouth

Description : A mandibular permanent first molar has to be extracted, this will affect: A. Adjacent teeth B. Teeth in the same quadrant C. Both arches the same side D. Full mouth

Last Answer : D. Full mouth

An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness

Treatment of fibrous dysplasia consists of, A. Resection B. Complete excision if it affects small area; if it is large lesion, limited excision surgery because of the cosmetic considerations. C. Irradiation D. Excision and removal of adjacent teeth E. None of the above

Description : Treatment of fibrous dysplasia consists of, A. Resection B. Complete excision if it affects small area; if it is large lesion, limited excision surgery because of the cosmetic considerations. C. Irradiation D. Excision and removal of adjacent teeth E. None of the above

Last Answer : B. Complete excision if it affects small area; if it is large lesion, limited excision surgery because of the cosmetic considerations.

In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Description : In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Last Answer : B. Slightly done undercut of the buccal and lingual wall

What is Ante’s Law about, A. The relation between the span of the bridge and the pontics B. The periodontal area of the abutment teeth C. The relation between the length of the root and the abutment.

Description : What is Ante’s Law about, A. The relation between the span of the bridge and the pontics B. The periodontal area of the abutment teeth C. The relation between the length of the root and the abutment.

Last Answer : B. The periodontal area of the abutment teeth

Why would you decide to replace the anterior missing teeth for partial denture using bridge: A. Aesthetic B. Overjet C. Overbite

Description : Why would you decide to replace the anterior missing teeth for partial denture using bridge: A. Aesthetic B. Overjet C. Overbite

Last Answer : A. Aesthetic

The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Description : The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma

Last Answer : A. Elimination of plaque and calculus

Which part of the cranium is considered as the most stable area, A. Frankfort plane B. Occlusal plane C. Anterior cranial plane D. Anterior nasal to gnathion.

Description : Which part of the cranium is considered as the most stable area, A. Frankfort plane B. Occlusal plane C. Anterior cranial plane D. Anterior nasal to gnathion.

Last Answer : C. Anterior cranial plane

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

Occlusal cavity with extension of the buccal fissure is classified as, A. Class II B. Class III C. Class I D. Class V

Description : Occlusal cavity with extension of the buccal fissure is classified as, A. Class II B. Class III C. Class I D. Class V

Last Answer : C. Class I

the location of Class V is in, A. The buccal pit /fissure/ B. The occlusal surface C. The cervical third

Description : the location of Class V is in, A. The buccal pit /fissure/ B. The occlusal surface C. The cervical third

Last Answer : C. The cervical third

An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Last Answer : B. Contact the tooth under the survey line

Throbbing pain increases with heat and cold stimuli, the MOST probable diagnosis is, A. Cyst B. Occlusal trauma C. Advanced pulpitis

Description : Throbbing pain increases with heat and cold stimuli, the MOST probable diagnosis is, A. Cyst B. Occlusal trauma C. Advanced pulpitis

Last Answer : C. Advanced pulpitis

After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Description : After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Last Answer : A. Occlusal height

The MOST stable area to evaluate the craniofacial growth is: A. Nasal floor B. Cranial vault C. Occlusal plane D. Naso maxillary complex E. Anterior cranial base

Description : The MOST stable area to evaluate the craniofacial growth is: A. Nasal floor B. Cranial vault C. Occlusal plane D. Naso maxillary complex E. Anterior cranial base

Last Answer : E. Anterior cranial base

What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Last Answer : E. None of the above

What is NOT TRUE about occlusal trauma: A. Cemental tears B. Bone loss C. Mobility D. True pocket formation E. Bleeding in periodontal ligament

Description : What is NOT TRUE about occlusal trauma: A. Cemental tears B. Bone loss C. Mobility D. True pocket formation E. Bleeding in periodontal ligament

Last Answer : D. True pocket formation

Reduced occlusal area means: A. More fracture potential for amalgam B. Less fracture potential for amalgam C. Pulpal involvement D. Perio involvement E. None of the above

Description : Reduced occlusal area means: A. More fracture potential for amalgam B. Less fracture potential for amalgam C. Pulpal involvement D. Perio involvement E. None of the above

Last Answer : B. Less fracture potential for amalgam

Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Description : Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Last Answer : B. A guide used to orient the occlusal plane

What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Last Answer : A. Gingival /Below/

The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Description : The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Last Answer : GA.Parallel to occlusal plane

The principal factor involved in oral para-function is related to: A. Periods of stress B. Occlusal pre-maturities during mandibular closure

Description : The principal factor involved in oral para-function is related to: A. Periods of stress B. Occlusal pre-maturities during mandibular closure

Last Answer : B. Occlusal pre-maturities during mandibular closure

In the construction of an RPD, guiding planes are created, A. Perpendicular to the occlusal plane B. Parallel towards the path of placement.

Description : In the construction of an RPD, guiding planes are created,  A. Perpendicular to the occlusal plane  B. Parallel towards the path of placement. 

Last Answer : B. Parallel towards the path of placement.

Which is the MOST common local factor in the aetiology of periodontal disease: A. Occlusal trauma B. Calculus C. Brushing habits D. Coarse food

Description : Which is the MOST common local factor in the aetiology of periodontal disease: A. Occlusal trauma B. Calculus C. Brushing habits D. Coarse food

Last Answer : B. Calculus

.Which radiographic method would you use in assessing periodontal conditions and lesions: A. Bitewing B. Periapical C. Occlusal D. Panoramic

Description : .Which radiographic method would you use in assessing periodontal conditions and lesions: A. Bitewing B. Periapical C. Occlusal D. Panoramic

Last Answer : B. Periapical

Which is the most important local factor in the aetiology of periodontal disease: A. Occlusal trauma B. Calculus C. Brushing habits D. Coarse food

Description : Which is the most important local factor in the aetiology of periodontal disease: A. Occlusal trauma B. Calculus C. Brushing habits D. Coarse food

Last Answer : B. Calculus