In removable partial denture, the principle of an indirect retainer is to:
A. Stabilise against lateral movement
B. Prevent settling of major connectors
C. Restrict tissue movement at the distal extension base of the partial denture
D. Minimise movement of the base away from the supporting tissue

1 Answer

Answer :

D. Minimise movement of the base away from the supporting tissue

Related questions

Description : In removable partial dentures, the principle of an indirect retainer is that it: a. Stabilises against lateral movement b. Prevents settling of major connectors c. Restricts tissue movement at ... base of the partial denture. d. Minimises movement of the base away from the supporting tissue

Last Answer : d. Minimises movement of the base away from the supporting tissue

Description : When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors ... components to the major connector D. The components of the denture base which provides reciprocation

Last Answer : C. Smaller connectors which connect denture components to the major connector

Description : Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support ... area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension

Last Answer : C. Maintaining tissue support of the distal extension

Description : The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Last Answer : B. Reciprocation

Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Last Answer : B. Use mucco-compressive impression

Description : Denture stomatitis is commonly associated with, A. The continuous wearing of removable orthodontic appliances in otherwise healthy patient B. The proliferation of hypertrophic tissue at the denture ... overgrowth of some constituents of oral normal microflora D. Allergy to denture base material

Last Answer : C. The overgrowth of some constituents of oral normal microflora

Description : The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was ... gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Last Answer : C. Make sure the framework and retainers are seated in place before taking impression

Description : When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Last Answer : D. Wrought gold

Description : Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Last Answer : B. Plaque accumulation is less than with lingual plate

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

Description : It is desirable for major connectors of upper partial dentures to:** A. Be at least 5 mm away from the gingival margin B. Cover the anterior palate

Last Answer : A. Be at least 5 mm away from the gingival margin

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

Description : What is the Bilaminar Zone:** A. Formed of, or having, two laminae, or thin plates. Which is the distal attachment of superior hard lateral plate B. A vascular, innervated tissue that plays an important role in allowing the condyle to move foreward

Last Answer : B. A vascular, innervated tissue that plays an important role in allowing the condyle to move foreward

Description : Four year kid shows at your clinic with open bite as a result of thumb sucking, you notice a delayed speech ability, what would be your first management, A. Refer to a speech therapist B. Apply ... inhibitor denture and educate the parents about it so the kid will not be taking it off so often

Last Answer : A. Refer to a speech therapist

Description : The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Last Answer : A. Away from edentulous space

Description : Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Last Answer : A. Minimise distortion

Description : Which of the following muscles may affect the borders of a mandibular complete denture? A. Mentalis B. Lateral pterygoid C. Orbicularis oris D. Levator oris E. Temporalis

Last Answer : C. Orbicularis oris

Description : Which of these muscles may affect the borders of mandibular complete denture, M07 ********* A. Mentalis (act on the lower border) B. Lateral pterygoid C. Orbicularis oris D. Levator angulioris E. Temporal

Last Answer : C. Orbicularis oris

Description : A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Last Answer : C. Distortion of impression

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

Description : Why would you decide to replace the anterior missing teeth for partial denture using bridge: A. Aesthetic B. Overjet C. Overbite

Last Answer : A. Aesthetic

Description : In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only ... best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Last Answer : A. facilitate the construction of custom/special trays

Description : In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and ... weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Last Answer : d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Description : In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in ... examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Last Answer : D. During the periodontal examination each tooth should be tested individually for hyper mobility

Description : Tissue conditioning materials: (Silicon lining materials) A. are more resilient than plastic acrylic B. can minimise any bacterial colonies

Last Answer : A. are more resilient than plastic acrylic

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

Description : If aesthetic is not a concern what is the first thing to do to treat soreness under dentures, A. Take the denture off for a week B. Rinse the denture in nystatin C. Apply tissue conditioner

Last Answer : A. Take the denture off for a week

Description : In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Last Answer : A. Contour the wax as part of the fabrication of the working cast

Description : The technique of placing guttapercha cones against the root canal walls providing space for additional guttapercha is termed: A. Lateral Condensation B. One major Gutta Percha point C. Laterally above condensed

Last Answer : A. Lateral Condensation

Description : TTo extract upper deciduous molars, the movement should be:  A. Buccal first to move tooth  B. Palatal first to move tooth  C. Distal first to move tooth  D. Rotation movement  E. Fraction of the tooth 

Last Answer : B. Palatal first to move tooth 

Description : The extraction of maxillary deciduous molar in 5 years old child; you should use: A. Mostly towards the apex pressure and some movement B. Rotation C. Distal pressure and movement D. Labial-lingual movement

Last Answer : D. Labial-lingual movement

Description : The biting load of denture base to tissues compared to teeth are, A. Ten times more B. Ten times less C. Equal

Last Answer : B. Ten times less

Description : The effect of the temperature rising above 100ºC on heat-cured denture-base acrylic resins is: A. Produces porosity on the external portion of the resin. B. Produces porosity on the internal portion ... porosity on the surface of the resin. D. Prevents porosity on the interior of the resin

Last Answer : B. Produces porosity on the internal portion of the resin.

Description : Denture hyperplasia is generally attributed to: A. Poor oral hygiene B. Denture movement

Last Answer : B. Denture movement

Description : Which of the following is a major disadvantage to immediate complete denture therapy: A. Trauma to extraction site FB. Increased the potential of infection C. Impossibility for anterior try in D. Excessive resorption of residual ridge

Last Answer : C. Impossibility for anterior try in

Description : Which of the following is a major disadvantage to immediate complete denture therapy, A. Trauma to extraction site B. Increased potential of infection C. Impossibility for anterior try in D. Excessive resorption of residual ridge

Last Answer : C. Impossibility for anterior try in

Description : What is Path of Removal: A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth B. The movement of the appliance from the points of initial contacts to path of final rest position

Last Answer : A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth

Description : What of the following is TRUE regarding the placement of the movable component of the non-rigid connector in a fixed bridge: A. Should be placed on the longer retainer B. Mesial drift causes unseating of the distally placed connector

Last Answer : B. Mesial drift causes unseating of the distally placed connector

Description : On examination of an 8 years-old child you find 75 with carious exposure. On X-ray you find 35  missing. Your treatment is:  A. Extraction of 75 allowing 36 to move mesially  B. ... of 75 and place a fixed space retainer to be replaced with fixed bridge. D. Extraction of 65 and 75 

Last Answer : B. Pulpotomy on 75 and wait indefinitely  

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

Description : In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. ... of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Last Answer : B. Reproduction of normal tooth incline in the gingival one third of the crown

Description : On inspection of lateral boarder of the tongue at the base, which structure would you expect to find: a. Filiform papillae. b. Fungiform papillae. c. Taste buds. d. Lymph nodes. e. Circumvallate papillae.

Last Answer : d. Lymph nodes.

Description : On inspection of lateral boarder of the tongue at the base, which structure would you expect to find: A. Filiform papillae B. Fungiform papillae C. Taste buds D. Lymph nodes E. Circumvallate papillae

Last Answer : D. Lymph nodes

Description : When the neck of the condyle is fractured; what muscle determines the movement of the superior segment: A. Lateral pterygoid B. Medial pterygoid C. Masseter D. Temporalis E. Mylohyoid

Last Answer : A. Lateral pterygoid

Description : When the neck of the condyle is fractured; what muscle determines the movement of the superior segment: A. Lateral pterygoid B. Medial pterygoid C. Temporalis D. Mylohyoid

Last Answer : A. Lateral pterygoid

Description : Etching techniques are used always to: A. minimise the leakage of restorations B. for aesthetic considerations

Last Answer : A. minimise the leakage of restorations

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

Description : The method you will use to fill root canal of maxillary lateral incisor is: A. One major Gutta Percha cone B. Laterally condensed C. Laterally above condensed

Last Answer : B. Laterally condensed

Description : In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Last Answer : B. Slightly done undercut of the buccal and lingual wall

Description : The MOST common curvature of palatal root of maxillary first molar is: A. Distal B. Mesial C. Buccal D. Palatal

Last Answer : C. Buccal