What of the following is TRUE regarding the placement of the movable component of the non-rigid  connector in a fixed bridge:
A. Should be placed on the longer retainer
B. Mesial drift causes unseating of the distally placed connector

1 Answer

Answer :

B. Mesial drift causes unseating of the distally placed connector

Related questions

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

Description : On examination of an 8 years-old child you find 75 with carious exposure. On X-ray you find 35  missing. Your treatment is:  A. Extraction of 75 allowing 36 to move mesially  B. ... of 75 and place a fixed space retainer to be replaced with fixed bridge. D. Extraction of 65 and 75 

Last Answer : B. Pulpotomy on 75 and wait indefinitely  

Description : When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors ... components to the major connector D. The components of the denture base which provides reciprocation

Last Answer : C. Smaller connectors which connect denture components to the major connector

Description : The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Last Answer : B. Mesially

Description : A patient with impacted canine; by moving the X ray tube distally the canine moves distally too; where do you expect the impacted canine: A. Labially impacted B. Palatally impacted ... -five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Last Answer : B. Palatally impacted Eighty-five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Description : Ankylotic primary second molar in the mandible is not always a good space maintainer because of: a. Mesial inclination of the 1st permanent molar. b. It does not keep up with the rest of occlusion. c.Dull on percussion.

Last Answer : b. It does not keep up with the rest of occlusion.

Description : In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Last Answer : B. Slightly done undercut of the buccal and lingual wall

Description : The MOST common curvature of palatal root of maxillary first molar is: A. Distal B. Mesial C. Buccal D. Palatal

Last Answer : C. Buccal

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

Description : Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as .What is complicated by): A. The mesial concavity of the root ... pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Last Answer : A. The mesial concavity of the root surface

Description : Which of the following is a typical consequence of dental crowding, assuming no primary tooth has been lost prematurely? A. Overlapping of lower incisors B. Palatal displacement of upper canines C. Impaction ... and first molars D. Mesial tipping of 16 and 26 E. Rotation of 16 and 26

Last Answer : A. Overlapping of lower incisors

Description : Which direction does the palatal root of the upper first molar usually curve towards? A. Facial / buccal/ B. Lingual C. Mesial D. Distal

Last Answer : A. Facial / buccal/

Description : In removable partial dentures, the principle of an indirect retainer is that it: a. Stabilises against lateral movement b. Prevents settling of major connectors c. Restricts tissue movement at ... base of the partial denture. d. Minimises movement of the base away from the supporting tissue

Last Answer : d. Minimises movement of the base away from the supporting tissue

Description : In removable partial denture, the principle of an indirect retainer is to: A. Stabilise against lateral movement B. Prevent settling of major connectors C. Restrict tissue movement at the distal ... base of the partial denture D. Minimise movement of the base away from the supporting tissue

Last Answer : D. Minimise movement of the base away from the supporting tissue

Description : The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Last Answer : B. Reciprocation

Description : The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not ... dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.

Last Answer : A. Color stability and resistance to abrasion

Description : In regard to Universal currete what is true? a- You can use both ends equally. b- You can use one end only. c- Angle of shank and blade is 70 degrees. d- You can use it for specific area. e- It has very rigid handle.

Last Answer : a- You can use both ends equally.

Description : Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Last Answer : A. Distribute the occlusal load

Description : Patient with class II division II; the lateral incisor is missing. You want to make a fixed bridge which of the following is suitable: A. Rocket bridge using central incisor as abutment ( ... al Maryland B. Cantilever using central incisor C. Fixed bridge using the central incisor and bicuspid

Last Answer : B. Cantilever using central incisor

Description : After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas

Last Answer : A. Occlusal height

Description : Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings

Last Answer : A. Mechanical trauma due to cavity preparation

Description : In the construction of an RPD, guiding planes are created,  A. Perpendicular to the occlusal plane  B. Parallel towards the path of placement. 

Last Answer : B. Parallel towards the path of placement.

Description : When do you finish composite resin restorations: A. Immediately after curing B. After 24 hours C. A week after placement

Last Answer : A. Immediately after curing

Description : The best way to clean a cavity before the placement of GIC is,** A. H2O2 B. Phosphoric Acid C. Polyacrylic acid 10% sturdavent 563pag

Last Answer : C. Polyacrylic acid 10% sturdavent 563pag

Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Last Answer : B. Contact the tooth under the survey line

Description : Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be ... planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Last Answer : F. Depth of rest seats

Description : What is Path of Removal: A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth B. The movement of the appliance from the points of initial contacts to path of final rest position

Last Answer : A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth

Description : Can you get me up to date on Neutrinos and their potential for unseating the speed of light as highest known speed?

Last Answer : Article.

Description : After prophylactic treatment, you decide to change the flora to a non-acidogenic by changing the diet. How long does it take to achieve this change: A. Few weeks B. Several months or longer

Last Answer : B. Several months or longer

Description : What is TRUE about vertical dimension:  A. Does not change for the whole life   B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient  supine reduced, stress and pain also reduced)  C. Increases when a lower denture is placed in mouth 

Last Answer : C. Increases when a lower denture is placed in mouth 

Description : Which of the following is used as an intermediate to extend the processor BUS? A. Gateway B. Router C. Connector D. Bridge

Last Answer : D. Bridge

Description : Which of the following statement is FALSE regarding Krukenberg tumors Options: 1) They are primary ovarian carcinomas that always secondarily metastasize to Gastrointestinal organs 2) They are almost ... ) There is no infiltration through the capsule 4) They are freely movable in pelvis

Last Answer : orrect Answer: 1) They are primary ovarian carcinomas that always secondarily metastasize to Gastrointestinal organs

Description : Which of the following is true regarding preparation of custom tray for elastomeric impression: a. Adhesive is preferred over perforation. b. Perforation provides adequate retention c. Adhesive is ... before procedure d. Perforations are not made in the area over the prepared tooth .

Last Answer : a. Adhesive is preferred over perforation.

Description : .Which of the following is true regarding preparation of custom tray for elastomeric impression: A. Adhesive is preferred over perforation B. Perforation provides adequate retention C. Adhesive is ... immediately before procedure D. Perforations are not made in the area over the prepared tooth

Last Answer : A. Adhesive is preferred over perforation

Description : Which of the following is true regarding gingivosis (Desquamative gingivitis) A. It is caused by hormononal imbalance B. Is seen only at or after menopause C. Is frequently caused by lichen planus D. Is a variant pregnancy gingivitis E. Is related to nutritional disturbance

Last Answer : C. Is frequently caused by lichen planus

Description : Do the majority of HD TVs no longer have a coax connector ? If not, how can I locate it ?

Last Answer : answer:It's got to be there somewhere! Cable TV/coax is not an outdated technology. Is is actually a television or is is just an HD monitor? If so, you may need an adapter. Though maybe I don't ... appear to have a coax output. The TV doesn't have a coax output or a coax input, or neither?

Description : Is a single fixed pulley superior than a single movable pulley?

Last Answer : Need answer

Description : What compound machine consists of both fixed in movable pulley?

Last Answer : Feel Free to Answer

Description : What is a fixed and movable pulley used together?

Last Answer : Feel Free to Answer

Description : In a stationary wave, nodes are at A. fixed points B. movable points C. there are no nodes D. random points

Last Answer : fixed points

Description :  Point where spring oscillates with maximum amplitude is called A. node B. antinode C. fixed end D. movable end

Last Answer : antinode

Description : What will happen if ligaments are torn? (a) Bones will move freely at joint and no pain. (b) Bone less movable at joint and pain. (c) Bone will become unfixed. (d) Bone will become fixed.

Last Answer : (b) Bone less movable at joint and pain.

Description : What do you call of an instrument that depends for its operation on the reaction between magnetic flux set up by currents in fixed windings and other currents set up by electromagnet induction in movable conducting parts?

Last Answer : induction instrument

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

Description : Padma On the bridge Railroad Placement Will be Where ?

Last Answer : On the Padma Bridge Railroad Placement Will be Despicable On the floor.

Description : What is The sign placed on a music staff to indicate placement of the f below middle c?

Last Answer : That would be the bass clef. There is a curved shape with twodots next to it: the dots are on either side of whichever line isdesignated as F.

Description : 88 firebird rear axle comes out w/new brng and retainer. What causes this

Last Answer : Need Answer

Description : Following calcium hydroxide pulpotomy, the dentist would expect dentine bridge to form at, A. The exact level of amputation B. Level somewhere below the amputation C. Half way between amputation and apex D. At the apical region of the tooth

Last Answer : B. Level somewhere below the amputation

Description : What is the best way to cement Maryland bridge, A. GIC B. Resin C. High compression restorative resin D. Zinc Phosphate cement E. Oxide Zinc and eugenol

Last Answer : B. Resin

Description : What is Ante’s Law about, A. The relation between the span of the bridge and the pontics B. The periodontal area of the abutment teeth C. The relation between the length of the root and the abutment.

Last Answer : B. The periodontal area of the abutment teeth