In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

In the construction of partial dentures the surveyor is not used to,
A. Contour the wax as part of the fabrication of the working cast
B. Locate the guide planes
C. Determine the location of indirect retainers
D. Identify any undesirable undercuts
by

1 Answer

Answer :

A. Contour the wax as part of the fabrication of the working cast
by

Related questions

Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Description : Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Last Answer : B. To orient cast to surveyor

What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Last Answer : A. Gingival /Below/

A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Description : A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Last Answer : C. Distortion of impression

Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Description : Why would you invest the wax pattern as soon as possible in an indirect inlay fabrication: A. Minimise distortion B. Avoid contraction C. Avoid expansion

Last Answer : A. Minimise distortion

In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Description : In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Last Answer : B. Assure predictable clasp retention

In removable partial dentures, the principle of an indirect retainer is that it: a. Stabilises against lateral movement b. Prevents settling of major connectors c. Restricts tissue movement at the distal extension base of the partial denture. d. Minimises movement of the base away from the supporting tissue

Description : In removable partial dentures, the principle of an indirect retainer is that it: a. Stabilises against lateral movement b. Prevents settling of major connectors c. Restricts tissue movement at ... base of the partial denture. d. Minimises movement of the base away from the supporting tissue

Last Answer : d. Minimises movement of the base away from the supporting tissue

After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask patient to bite firmly while impression is setting B. Hold the metal base frame against the abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only limited information about inter ridge distance, which is best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Description : In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only ... best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Last Answer : A. facilitate the construction of custom/special trays

The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was thickness) between denture and gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Description : The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was ... gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Last Answer : C. Make sure the framework and retainers are seated in place before taking impression

A gingivally extended chrome cobalt cast clasp: A. Can extend 0.5 under the surveyor line B. Can extend 0.25 under the surveyor line C. Will resist deforming forces better compared to cast gold

Description : A gingivally extended chrome cobalt cast clasp: A. Can extend 0.5 under the surveyor line B. Can extend 0.25 under the surveyor line C. Will resist deforming forces better compared to cast gold

Last Answer : B. Can extend 0.25 under the surveyor line

The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Description : The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Last Answer : B. Reciprocation

hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Description : hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Last Answer : You would need to go to a dental school and get certfied as a technition.

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

In regard to indirect compared to direct wax technique, what characteristics must the wax have:** A. Low temperature solidifying point B. Hard in room temperature C. Higher flow in room temperature

Description : In regard to indirect compared to direct wax technique, what characteristics must the wax have:** A. Low temperature solidifying point B. Hard in room temperature C. Higher flow in room temperature

Last Answer : B. Hard in room temperature

What is true about partial dentures, A. They cause immediate changes in the oral plaque behaviour B. Night wearing of dentures reduces plaque accumulation C. Relieving the gingival area reduces the gingival enlargement.

Description : What is true about partial dentures, A. They cause immediate changes in the oral plaque behaviour B. Night wearing of dentures reduces plaque accumulation C. Relieving the gingival area reduces the gingival enlargement.

Last Answer : A. They cause immediate changes in the oral plaque behaviour

It is desirable for major connectors of upper partial dentures to:** A. Be at least 5 mm away from the gingival margin B. Cover the anterior palate

Description : It is desirable for major connectors of upper partial dentures to:** A. Be at least 5 mm away from the gingival margin B. Cover the anterior palate

Last Answer : A. Be at least 5 mm away from the gingival margin

Which of the following liquids is not suitable for prolonged immersion of cobalt chrome partial dentures: A. Alkaline peroxidase B. Hypochlorite solutions C. Soap solutions D. Water

Description : Which of the following liquids is not suitable for prolonged immersion of cobalt chrome partial dentures: A. Alkaline peroxidase B. Hypochlorite solutions C. Soap solutions D. Water

Last Answer : B. Hypochlorite solutions

Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework C. Areas used for guideline planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Description : Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be ... planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Last Answer : F. Depth of rest seats

In removable partial denture, the principle of an indirect retainer is to: A. Stabilise against lateral movement B. Prevent settling of major connectors C. Restrict tissue movement at the distal extension base of the partial denture D. Minimise movement of the base away from the supporting tissue

Description : In removable partial denture, the principle of an indirect retainer is to: A. Stabilise against lateral movement B. Prevent settling of major connectors C. Restrict tissue movement at the distal ... base of the partial denture D. Minimise movement of the base away from the supporting tissue

Last Answer : D. Minimise movement of the base away from the supporting tissue

You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Description : You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Last Answer : A. Incorporating mesh work in wax pattern

In the construction of an RPD, guiding planes are created, A. Perpendicular to the occlusal plane B. Parallel towards the path of placement.

Description : In the construction of an RPD, guiding planes are created,  A. Perpendicular to the occlusal plane  B. Parallel towards the path of placement. 

Last Answer : B. Parallel towards the path of placement.

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Description : The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Last Answer : C. 2/3 tooth/root length

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

Location of soundings by range and one angle is done by the surveyor (A) On the shore (B) On the boat (C) On the shore or on the boat (D) None of the above

Description : Location of soundings by range and one angle is done by the surveyor (A) On the shore (B) On the boat (C) On the shore or on the boat (D) None of the above

Last Answer : (C) On the shore or on the boat

When incrementally placing a large composite resin restoration, what effect does an air-inhibited layer on the surface of the first increment have on the bond between the first and the second increments? A. It has no effect on the bond B. It is desirable and improves the bond C. It is undesirable and should be removed

Description : When incrementally placing a large composite resin restoration, what effect does an air-inhibited layer on the surface of the first increment have on the bond between the first and the second increments? A. ... B. It is desirable and improves the bond C. It is undesirable and should be removed

Last Answer : B. It is desirable and improves the bond

X rays are used in endodontic treatment to: A. Aid in the diagnosis of periapical hard tissue lesion B. Determine the number, location, shape, size and direction of roots and root canals C. Confirm the length of root canals D. Evaluate the adequacy of the complete root canal filling E. All of the above

Description : X rays are used in endodontic treatment to: A. Aid in the diagnosis of periapical hard tissue lesion B. Determine the number, location, shape, size and direction of roots and root canals C. Confirm ... root canals D. Evaluate the adequacy of the complete root canal filling E. All of the above

Last Answer : E. All of the above

7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Which muscle acts on the disto-lingual contour of lower denture: A. Mentalis B. Masseter C. Mylohyoid D. Buccinator

Description : Which muscle acts on the disto-lingual contour of lower denture: A. Mentalis B. Masseter C. Mylohyoid D. Buccinator

Last Answer : C. Mylohyoid

Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent formation of an “overhang” D. Provide adequate physiological contour for the proximal surface E. Provide an acceptable surface texture to the proximal surface F. All of the above

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

The MOST common consequence arising from premature extraction of deciduous molars is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour D. Loss of vertical height E. Loss of free way space

Description : The MOST common consequence arising from premature extraction of deciduous molars is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour D. Loss of vertical height E. Loss of free way space

Last Answer : A. Loss of arch length

The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Description : The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Last Answer : A. Perpendicular to the outer surface of the tooth

In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Description : In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Last Answer : E. Overextension of lining in cavity

The MOST common consequence arising from premature extraction of deciduous molar is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour

Description : The MOST common consequence arising from premature extraction of deciduous molar is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour

Last Answer : A. Loss of arch length

Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Description : Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Last Answer : A. Below the height of contour

The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Description : The gingiva of a child is diagnosed on the basis of all of these except of: A. Contour of gingival papilla B. Sulcus depth C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred D. Tight filling of gingival collar

Last Answer : C. Contour of Nasmyth membrane (nasmyth description of the membrane is unclear that's why the term enamel cuticle is preferred

When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C. 4mm reduction while forming a flattened surface D. 4mm reduction while following the original contour of the surface

Description : When restoring weakened cusps with dental amalgam you should consider: A. 2mm reduction while forming a flattened surface B. 2mm reduction while following the original contour of the cusps C ... forming a flattened surface D. 4mm reduction while following the original contour of the surface

Last Answer : A. 2mm reduction while forming a flattened surface

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

If aesthetic is not a concern what is the first thing to do to treat soreness under dentures, A. Take the denture off for a week B. Rinse the denture in nystatin C. Apply tissue conditioner

Description : If aesthetic is not a concern what is the first thing to do to treat soreness under dentures, A. Take the denture off for a week B. Rinse the denture in nystatin C. Apply tissue conditioner

Last Answer : A. Take the denture off for a week

When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Description : When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Last Answer : A. Increase the compensatory curve

When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Last Answer : B. Decreasing the angle orientation of the occlusal plane

.In full dentures porosity in the most thickest area is due to:** A. Gaseous porosity B. Shrinkage porosity

Description : .In full dentures porosity in the most thickest area is due to:** A. Gaseous porosity B. Shrinkage porosity

Last Answer : A. Gaseous porosity

In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Description : In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Last Answer : A. Reduced Overjet of posterior teeth

Porosity in acrylic dentures is caused by, A. Contraction porosity in thickest point of the denture B. Insufficient pressure during flasking

Description : Porosity in acrylic dentures is caused by,  A. Contraction porosity in thickest point of the denture  B. Insufficient pressure during flasking 

Last Answer : A. Contraction porosity in thickest point of the denture  B. Insufficient pressure during flasking