Terminal Hinge Axis can be obtained by: A. Face bow B. Kinematic face bow C. Articulator

Terminal Hinge Axis can be obtained by:
A. Face bow
B. Kinematic face bow
C. Articulator
by

1 Answer

Answer :

B. Kinematic face bow
by

Related questions

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

What is the purpose of making a record of protrusive relation and what function does it serve after it is made? A. To register the condylar path and to adjust the inclination of the incisal guidance. B. To aid in determining the freeway space and to adjust the inclination of the incisal guidance. C. to register the condylar path and to adjust the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Description : What is the purpose of making a record of protrusive relation and what function does it serve after it is made? A. To register the condylar path and to adjust the inclination of the ... the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Last Answer : C. to register the condylar path and to adjust the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Description : Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Last Answer : B. To orient cast to surveyor

The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Description : The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Last Answer : A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors

What is the purpose of making a record of protrusive relation and what function does it serve after it is made?******** M07 A. To register the condylar path and to adjust the inclination of the incisal guidance. B. To aid in determining the freeway space and to adjust the inclination of the incisal guidance. C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

Description : What is the purpose of making a record of protrusive relation and what function does it serve after it is made?******** M07 A. To register the condylar path and to adjust the inclination of ... C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

Last Answer : C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

The joint between atlas and axis is called (a) angular joint (b) hinge joint (c) pivot joint (d) saddle joint.

Description : The joint between atlas and axis is called (a) angular joint (b) hinge joint (c) pivot joint (d) saddle joint.

Last Answer : (c) pivot joint

Match the following joints with the bones involved: (1) Gliding joint (i) Between carpal and metacarpal of thumb (2) Hinge joint (ii) Between atlas and axis (3) Pivot joint (iii) Between the carpals (4) Saddle joint (iv) Between humerus and ulna. Select the correct option from the following: (a) (1)-(iii), (2)-(iv), (3)-(ii), (4)-(i) (b) (1)-(iv), (2)-(i), (3)-(ii), (4)-(iii) (c) (1)-(iv), (2)-(ii), (3)-(iii), (4)-(i) (d) (1)-(i), (2)-(iii), (3)-(ii), (4)-(iv)

Description : Match the following joints with the bones involved: (1) Gliding joint (i) Between carpal and metacarpal of thumb (2) Hinge joint (ii) Between atlas and axis (3) Pivot joint (iii) Between the carpals (4) Saddle joint (iv) Between humerus and ... ), (4)-(i) (d) (1)-(i), (2)-(iii), (3)-(ii), (4)-(iv)

Last Answer : (a) (1)-(iii), (2)-(iv), (3)-(ii), (4)-(i)

Wular lake of Kashmir is a : [IAS 2003] (a) Ox- bow lake (b) Lake formed by blocking of ice (c) Lake formed by terminal morainic dam (d) Lake formed by deposition of silt

Description : Wular lake of Kashmir is a : [IAS 2003] (a) Ox- bow lake (b) Lake formed by blocking of ice (c) Lake formed by terminal morainic dam (d) Lake formed by deposition of silt

Last Answer : Ans: (c)

If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Last Answer : b.parallel to the nearest external surface

What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Last Answer : E. None of the above

When a tooth is twisted along its long axis this is called: A. Mesio version B. Disto version C. Lingo version D. Torsion

Description : When a tooth is twisted along its long axis this is called: A. Mesio version B. Disto version C. Lingo version D. Torsion

Last Answer : D. Torsion

The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Description : The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Last Answer : GA.Parallel to occlusal plane

The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Description : The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Last Answer : A. Parallel to the outer wall

How many mg of fluoride ions are obtained from 2.2 mg tablet of NaF A. 0.5mg B. 1 mg C. 1.5mg D. 10mg

Description : How many mg of fluoride ions are obtained from 2.2 mg tablet of NaF A. 0.5mg B. 1 mg C. 1.5mg D. 10mg

Last Answer : B. 1 mg

What is NOT TRUE in relation to the prescription of 5mg or 10mg of diazepam for sedation?check A. Patient commonly complain of post operative headache T B. An acceptable level of anxiolytic action is obtained when the drug is given one hour preoperatively T C. There is a profound amnesic action and no side affects not sure D. Active metabolites can give a level of sedation up to 8 hours post operatively T E. As Benzodiazepine the action can be reversed with FlumazepilNE T

Description : What is NOT TRUE in relation to the prescription of 5mg or 10mg of diazepam for sedation?check A. Patient commonly complain of post operative headache T B. An acceptable level of anxiolytic ... to 8 hours post operatively T E. As Benzodiazepine the action can be reversed with FlumazepilNE T

Last Answer : C. There is a profound amnesic action and no side affects not sure

Your patient has fainted, the signs are, blanched face, weak pulse, moist skin, shallow respiration; your first management is: A. 1 ml adrenaline subcutaneously B. Mouth to mouth respiration C. Nitro glycerine sub lingually D. Recumbent position; supine

Description : Your patient has fainted, the signs are, blanched face, weak pulse, moist skin, shallow respiration; your first management is: A. 1 ml adrenaline subcutaneously B. Mouth to mouth respiration C. Nitro glycerine sub lingually D. Recumbent position; supine

Last Answer : D. Recumbent position; supine

Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Description : Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Last Answer : B. A guide used to orient the occlusal plane

Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Description : Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Last Answer : B. Increases when lower denture is inserted

In periodontal scalers and curettes the blade is formed by which two surfaces: A. Two lateral surfaces B. Lateral surface and face C. Lateral surface, face and shank D. Lateral surface, face, back and shank

Description : In periodontal scalers and curettes the blade is formed by which two surfaces: A. Two lateral surfaces B. Lateral surface and face C. Lateral surface, face and shank D. Lateral surface, face, back and shank

Last Answer : B. Lateral surface and face

What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Description : What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Last Answer : C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Which of the following banks has reported its point of sales terminal (PoS) network as largest in the country? A) HDFC B) Punjab National Bank C) SBI D) ICICI E) Axis Bank

Description : Which of the following banks has reported its point of sales terminal (PoS) network as largest in the country? A) HDFC B) Punjab National Bank C) SBI D) ICICI E) Axis Bank

Last Answer : C) SBI Explanation: SBI‘s point of sales terminal network has become the largest in the country after it took over its private sector rivals. It plans to add 1 lakh PoS terminals in current fiscal ending March 2017.

A group of flowers on an axis is called a. Solitary axillary flower b. Solitary terminal flower c. Inflorescence d. Modified flower

Description : A group of flowers on an axis is called a. Solitary axillary flower b. Solitary terminal flower c. Inflorescence d. Modified flower

Last Answer : Solitary axillary flower

Will I automatically do a hip hinge when I bend over if I don't bend my neck?

Description : Will I automatically do a hip hinge when I bend over if I don't bend my neck?

Last Answer : That may work for you. I just tried it, and I can round my lower back while keeping my neck straight, and I can straighten my lower back while bending my neck. I'm speaking from a dance ... dance perspective, not a scientific one). Edit to add: I hope I addressed what you were wondering about?

Would it freak you out if you regularly heard a noise that sounds like a squeaky hinge, even when you're home alone?

Description : Would it freak you out if you regularly heard a noise that sounds like a squeaky hinge, even when you're home alone?

Last Answer : Could the squeak be a heating duct or hot water baseboard heat run expanding and contracting as the heat cycles on and off? Sometimes.they shift and come in contact with the floor.

I have a DS with a small crack on the hinge... what should I do with it?

Description : I have a DS with a small crack on the hinge... what should I do with it?

Last Answer : You could just put it on eBay, but for a nice low price. Be up front about the damage, include a picture, but be sure to price it fairly low. Someone may be interested, you never know.

TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Description : TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Last Answer : d. compression : tension

What is hinge joint? -Biology

Description : What is hinge joint? -Biology

Last Answer : answer:

Is this statement true or falseThe Hinge Theorem can be used to compare side measures of two triangles?

Description : Is this statement true or falseThe Hinge Theorem can be used to compare side measures of two triangles?

Last Answer : 1

Is this statement true or falseThe Hinge Theorem states that the largest side of a triangle will be opposite the largest angle?

Description : Is this statement true or falseThe Hinge Theorem states that the largest side of a triangle will be opposite the largest angle?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Is this statement true or falseThe Converse of the Hinge Theorem can be used to determine exact measures of angles?

Description : Is this statement true or falseThe Converse of the Hinge Theorem can be used to determine exact measures of angles?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

How fix a hutch hinge touch llight

Description : How fix a hutch hinge touch llight

Last Answer : Need Answer

Hinge joint is `:`

Description : Hinge joint is `:`

Last Answer : Hinge joint is `:` A. Elbowjoint B. Ankle joint C. Inter phalangeal joint D. All

Hinge joint is `:`

Description : Hinge joint is `:`

Last Answer : Hinge joint is `:` A. Elbow joint B. Ankle joint C. Interphalangeal joint D. All

Hinge joint is present between

Description : Hinge joint is present between

Last Answer : Hinge joint is present between A. Humerus and radio-ulna B. Femur and pelvic gitdle C. Femer and acetabulum D. Humerus and pectoral girdle

What will be the total force at hinge of Bell crank lever?

Description : What will be the total force at hinge of Bell crank lever?

Last Answer : Feel Free to Answer

What is Best material for outdoor hinge?

Description : What is Best material for outdoor hinge?

Last Answer : Need answer

Laptop Hinge Repair?

Description : Laptop Hinge Repair?

Last Answer : form_title= Laptop Hinge Repair form_header= Close and open your laptop easily with a hinge repair done by the experts. What brand and model is your laptop?*= _ [50] How old is your laptop? *= _ [50] Do you have a warranty on the laptop?*= () Yes () No () Not Sure

Hinge region, the region of Ig molecule which is flexible and more exposed to enzymes is the (A) Region between first and second constant regions of H chain (domains CH1 and CH2) (B) Region between second and third constant regions of H chain (CH2 and CH3) (C) Variable regions of H chain (D) Variable regions of L chain

Description : Hinge region, the region of Ig molecule which is flexible and more exposed to enzymes is the (A) Region between first and second constant regions of H chain (domains CH1 and CH2) (B) Region between second and ... H chain (CH2 and CH3) (C) Variable regions of H chain (D) Variable regions of L chain

Last Answer : Answer : A

The portion of the immunoglobulin molecule that binds the specific antigen is formed by (A) Variable regions of H and L chains (B) Constant region of H chain (C) Constant region of L chain (D) Hinge region

Description : The portion of the immunoglobulin molecule that binds the specific antigen is formed by (A) Variable regions of H and L chains (B) Constant region of H chain (C) Constant region of L chain (D) Hinge region

Last Answer : Answer : A

Which of these joints is a Hinge joint? (1) Hip (2) Elbow (3) Shoulder (4) Wrist

Description : Which of these joints is a Hinge joint? (1) Hip (2) Elbow (3) Shoulder (4) Wrist

Last Answer : (2) Elbow Explanation: A hinge joint allows movement in a certain spot to take place. This joint is similar to the opening and closing of a door. Some examples of hinge joints are the ... joints allow the body parts to bend and straighten. Hip and shoulders are synovial ball and socket joints.

The type of joint between the human skull bones is called (a) cartilaginous joint (b) hinge joint (c) fibrous joint (d) synovial joint.

Description : The type of joint between the human skull bones is called (a) cartilaginous joint (b) hinge joint (c) fibrous joint (d) synovial joint.

Last Answer : (c) fibrous joint

Which of the following pairs is correctly matched? (a) Hinge joint – Between vertebrae (b) Gliding joint – Between zygapophyses of the successive vertebrae (c) Cartilaginous joint – Skull bones (d) Fibrous joint – Between phalanges

Description : Which of the following pairs is correctly matched? (a) Hinge joint – Between vertebrae (b) Gliding joint – Between zygapophyses of the successive vertebrae (c) Cartilaginous joint – Skull bones (d) Fibrous joint – Between phalanges

Last Answer : (b) Gliding joint – Between zygapophyses of the successive vertebrae

Elbow joint is an example of (a) hinge joint (b) gliding joint (c) ball and socket joint (d) pivot joint.

Description : Elbow joint is an example of (a) hinge joint (b) gliding joint (c) ball and socket joint (d) pivot joint.

Last Answer : (a) hinge joint

Select the correct matching of the type of the joint with the example in human skeletal system. Type of joint Example (a) Cartilaginous – Between frontal and joint parietal (b) Pivot joint – Between third and fourth cervical vertebrae (c) Hinge joint – Between humerus and pectoral girdle (d) Gliding joint – Between carpals

Description : Select the correct matching of the type of the joint with the example in human skeletal system. Type of joint Example (a) Cartilaginous - Between frontal and joint parietal (b) Pivot joint - ... vertebrae (c) Hinge joint - Between humerus and pectoral girdle (d) Gliding joint - Between carpals

Last Answer : (d) Gliding joint – Between carpals

In case of a simply supported rectangular beam of span L and loaded with a central load W, the length of elasto-plastic zone of the plastic hinge, is (A) L/2 (B) L/3 (C) L/4 (D) L/5

Description : In case of a simply supported rectangular beam of span L and loaded with a central load W, the  length of elasto-plastic zone of the plastic hinge, is  (A) L/2  (B) L/3  (C) L/4  (D) L/5 

Last Answer : (B) L/3 

In case of a simply supported I-section beam of span L and loaded with a central load W, the length of elasto-plastic zone of the plastic hinge, is (A) L/2 (B) L/3 (C) L/4 (D) L/5

Description : In case of a simply supported I-section beam of span L and loaded with a central load W, the  length of elasto-plastic zone of the plastic hinge, is  (A) L/2  (B) L/3  (C) L/4  (D) L/5 

Last Answer : (D) L/5 

In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges

Description : In a three hinged arch, the bending moment will be zero (A) At right hinge only (B) At left hinge only (C) At both right and left hinges (D) At all the three hinges

Last Answer : (D) At all the three hinges

In a continuous bending moment curve the point where it changes sign, is called (A) Point of inflexion (B) Point of contraflexure (C) Point of virtual hinge (D) All the above

Description : In a continuous bending moment curve the point where it changes sign, is called (A) Point of inflexion (B) Point of contraflexure (C) Point of virtual hinge (D) All the above

Last Answer : (D) All the above