Description : Flexibility of the retentive clasp arm does not relate to: A. Length B. Cross section C. Material D. Degree of taper E. Under cut area
Last Answer : E. Under cut area
Description : Which of the following does not affect the elasticity of retentive clasp? A. Length of the arm B. The cross section shape C. The material used D. The undercut area
Last Answer : D. The undercut area
Description : .The undercut for Cobalt Chrome’s retentive arm clasp is, A. 0.75mm B. 0.50mm C. 0.25mm
Last Answer : C. 0.25mm
Description : How much undercut area should a clasp arm engage:** A. As much undercut as possible B. Anywhere beyond the survey line C. A predetermined amount of undercut
Last Answer : C. A predetermined amount of undercut
Description : Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support ... area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension
Last Answer : C. Maintaining tissue support of the distal extension
Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation
Last Answer : A. Gingival /Below/
Description : Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins
Last Answer : A. Below the height of contour
Description : Which pin system has proven to be the most retentive A. Self tapping threaded pin B. Friction peak pin C. Cemented pin
Last Answer : A. Self tapping threaded pin
Description : Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins
Last Answer : A. ¾ partial veneer crown
Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded
Last Answer : E. Elastic limit was exceeded
Description : In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp
Last Answer : B. Assure predictable clasp retention
Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid
Last Answer : B. Contact the tooth under the survey line
Description : A gingivally extended chrome cobalt cast clasp: A. Can extend 0.5 under the surveyor line B. Can extend 0.25 under the surveyor line C. Will resist deforming forces better compared to cast gold
Last Answer : B. Can extend 0.25 under the surveyor line
Description : A Gold clasp is more elastic than Cobalt Chrome, but Co-Chrome has high modulus of elasticity. A. The first statement is false the second is true B. Both are true C. The first is true the second is false D. Both are false
Last Answer : B. Both are true
Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature
Last Answer : it is directly proportional to the area of cross-section of wire
Description : Rank the following impressions materials according to their flexibility A. Alginate> Polysulphide> Silicone> Zinc Oxide Eugenol B. Silicone> Alginate> Polysulphide> Zinc Oxide Eugenol C. ... Eugenol> Silicone> Polysulphide 300.Denture resins are usually available as powder and liquid that
Last Answer : D. Alginate> Silicone> Polysulfide> Zinc Oxide Eugenol
Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these
Last Answer : (A) Speed
Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility
Last Answer : a) degrees of freedom
Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility
Last Answer : A : degrees of freedom
Description : The cross section of flywheel arm is 1. I section 2. Rectangular 3. Elliptical 4. Circular
Last Answer : 3. Elliptical
Description : The cross-section of the flywheel arm is, (A) I section (B) Rectangular (C) Elliptical (D) Circular
Last Answer : (C) Elliptical
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0
Last Answer : (B) 12.88
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0
Last Answer : (b) 12.88
Description : Elongation of a bar of uniform cross section of length ‘L’, due to its own weight ‘W’ is given by a. 2WL/E b. WL/E c. WL/2E d. WL/3E Where, E=Young’s modulus of elasticity of material
Last Answer : c. WL/2E
Description : 18.The total extension of a taper rod of length ‘L’ and end diameters ‘D1’ and ‘D2’, subjected to a load (P), is given of a. 4PL/ΠE. D1D2 b. 3PL/ΠE. D1D2 c. 2PL/ΠE. D1D2 d. PL/ΠE.D1D2 Where E=Young’s modulus of elasticity
Last Answer : a. 4PL/ΠE. D1D2
Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ... (C) One end is fixed and the other end entirely free (D) Both the ends are fixed
Last Answer : (D) Both the ends are fixed
Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) ... (c) One end is fixed and the other end entirely free (d) Both the ends are fixed
Last Answer : (d) Both the ends are fixed
Description : The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length
Last Answer : Answer: Option B
Description : Oral mucosal pigmentation; what is TRUE: a. Commonly depends on ethnicity. b. Commonly an amalgam tattoo. c. Commonly oral melanoma. d. Commonly melanotic naevus.
Last Answer : a. Commonly depends on ethnicity.
Description : The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not ... dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.
Last Answer : A. Color stability and resistance to abrasion
Description : Which rotary instrument gives the smoothest enamel cut? a. carborundum stone (green stone) b. aluminum oxide stone (white stone) c. plain fissure bur d. cross-cut fissure bur e. medium diamond bur (great efficiency but roughest cut)
Last Answer : c. plain fissure bur
Description : In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a hybrid layer by chemically reacting the intertubular dentin. 3. a hydrophilic ... a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4
Last Answer : b. 1,4
Description : In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)
Last Answer : (D) (i), (ii) and (iii)
Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip
Last Answer : b.parallel to the nearest external surface
Description : In the coastal lowland of Kerala two crops of rice is grown per year because of: [IAS 2003] 1. high temperature in winter 2. adequate rain throughout the year 3. adequate irrigation facility 4. presence of water retentive clayey loam soil (a) Only 1 (b) 2 and 3 (c) 1 and 2 (d) 1, 3, and 4
Last Answer : Ans: (c)
Description : Of the following statements about the major soil types, the incorrect one is : (a) alluvial soils are easy to plough (b) red soils are rich in phosphorus, nitrogen and lime content ( ... regions which receive heavy seasonal rainfall (d) black soil is highly retentive of moisture and very productive
Last Answer : Ans: (b)
Description : In regard to colour, what does Chroma stand for, A. Degree of saturation of hue B. Brightness C. Value D. Contrast
Last Answer : A. Degree of saturation of hue
Description : The angle of blade for closed curettage is:** A. Less than 35 degree B. Less than 45 degree C. Less than 90 degree D. Less than 100 degree
Last Answer : C. Less than 90 degree
Description : In the hand instrument formula, 13-80-8-14, the number 14 represents the a. width of the blade b. blade length c. blade angle d. primary cutting edge angle e. none of the above.
Last Answer : c. blade angle
Description : A 7 years-old child has class I malocclusion, slight version of maxillary class III, adequate arch length. What is your management: A. Oral screen B. Head cap therapy C. Inclined plane on mandibular anterior teeth D. Hawley plate E. Expansion screw plate
Last Answer : C. Inclined plane on mandibular anterior teeth
Description : The MOST common consequence arising from premature extraction of deciduous molars is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour D. Loss of vertical height E. Loss of free way space
Last Answer : A. Loss of arch length
Description : The length of the tooth is established by: A. Good undistorted pre-operative x ray B. Adequate coronal access to all canals C. Adjustable endo millimetre ruler D. Definite repeatable plane of reference to anatomical landmark on tooth E. All of the above
Last Answer : A. Good undistorted pre-operative x ray
Description : X rays are used in endodontic treatment to: A. Aid in the diagnosis of periapical hard tissue lesion B. Determine the number, location, shape, size and direction of roots and root canals C. Confirm ... root canals D. Evaluate the adequacy of the complete root canal filling E. All of the above
Last Answer : E. All of the above
Description : The term TUGback is related to ( “When used in connection with a master Gutta Percha cone in endodontics)” : A. Tensile strength of the gutta percha B. Consistency of gutta percha C. Size of the cone D. Fit of the cone in the apical 1 or 2 mm E. Length of the cone
Last Answer : D. Fit of the cone in the apical 1 or 2 mm
Description : Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding ... highly significant retention and good marginal integrity and clinical durability E. None of the above
Last Answer : A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material
Description : Elastomers are:** A. Hydrophilic B. Hydrophobic C. Water-loving impression material D. Potassium alginates E. None of the above
Last Answer : B. Hydrophobic
Description : A major difference between light cured and chemical cured composite is that during setting or in function the light cured material tends to:******** VERY IMP A. Seal the margins better and ... on time C. Undergo greater colour change D. Shrink more rapidly E. Posses greater fracture toughness
Last Answer : D. Shrink more rapidly
Description : The obturating material of choice for primary teeth following complete pulpectomy is, A. Zn phosphate cement and formcresol combination paste B. Quick setting hydroxide cement C. Zinc oxide and eugenol cement D. Gutta-percha E. Polycarboxylate cement
Last Answer : C. Zinc oxide and eugenol cement
Description : X-ray films have an emulsion on one or both sides of a support material. The emulsion contains particles of, A. Silver nitrate crystal B. Metallic silver in gelatine C. Silver bromide in gelatine D. Silver nitrate in gelatine E. Potassium bromide in gelatine
Last Answer : C. Silver bromide in gelatine
Description : Deformation drag, which is caused by widespread deformation of fluid around the immersed body (A) Occurs when NRe is very small (B) Is primarily a friction drag (C) Is independent of body length (D) Depends mainly on cross-sectional shape
Last Answer : (A) Occurs when NRe is very small