The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

The capacity of a belt conveyor depends upon two factors. If one is the
cross-section of the load, the other is the __________ of the belt.
(A) Speed
(B) Thickness
(C) Length
(D) None of these
by

1 Answer

Answer :

(A) Speed
by

Related questions

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Last Answer : (A) Apron

__________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Description : Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Last Answer : (B) Drag or slat

For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Last Answer : (B) Pneumatic

__________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Description : __________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Last Answer : (A) Flight

Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Last Answer : (C) Screw

The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Description : The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Last Answer : (c) Voltage

For the same dimensions of the shaft which of the following has the greater natural frequency? A. Transverse B. Longitudinal C. Depends on thickness D. Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? A. Transverse B. Longitudinal C. Depends on thickness D. Depends upon length

Last Answer : B. Longitudinal

For the same dimensions of the shaft which of the following has the greater natural frequency? (A) Transverse (B) Longitudinal (C) Depends on thickness (D) Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? (A) Transverse (B) Longitudinal (C) Depends on thickness (D) Depends upon length

Last Answer : (B) Longitudinal

For the same dimensions of the shaft which of the following has the greater natural frequency? a) Transverse b) Longitudinal c) Depends on thickness d) Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? a) Transverse b) Longitudinal c) Depends on thickness d) Depends upon length

Last Answer : b) Longitudinal

Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Last Answer : (C) Flight conveyor

The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Last Answer : (B) 30°

The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Last Answer : (B) Pneumatic conveyor

Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Description : Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Last Answer : (C) Screw conveyor

For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Last Answer : (C) Screw conveyor

Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Last Answer : (C) Screw conveyor

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

Lower BWG means __________ of the tube. (A) Lower thickness (B) Lower cross-section (C) Outer diameter (D) Inner diameter

Description : Lower BWG means __________ of the tube. (A) Lower thickness (B) Lower cross-section (C) Outer diameter (D) Inner diameter

Last Answer : (B) Lower cross-section

In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : In the cross-section method of indirect contouring, the spacing of cross-sections depends upon (i) Contour interval (ii) Scale of plan (iii) Characteristics of ground The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : (D) (i), (ii) and (iii)

Where can I buy a belt conveyor system?

Description : Where can I buy a belt conveyor system?

Last Answer : There are several different sites online where you can purchase a conveyor belt system. One such site is conveyorbelts.com. A wide selection is offered.

What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Last Answer : (b) Roller bearing

Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Last Answer : Forward: Reverse:

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Last Answer : (D) All three factors

Flexibility of the retentive clasp arm depends on: A. Length B. Cross section C. Material D. Degree of taper E. All of the above

Description : Flexibility of the retentive clasp arm depends on: A. Length B. Cross section C. Material D. Degree of taper E. All of the above

Last Answer : E. All of the above

Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer :  it is directly proportional to the area of cross-section of wire

The value of the capacitance depends upon the________________? A.voltage applied B. thickness of the capacitor plates C. geometry of the capacitor D. dinsity of the capacitor plates

Description : The value of the capacitance depends upon the________________? A.voltage applied B. thickness of the capacitor plates C. geometry of the capacitor D. dinsity of the capacitor plates

Last Answer : Ans: C

Key point for its proper functioning of base region in a transistor depends upon the thickness of the base Why ?

Description : Key point for its proper functioning of base region in a transistor depends upon the thickness of the base Why ?

Last Answer : Base region in a transistor controls the current. The majority charge carriers supplied by the emitter do not combine in the same region due to its thin size and light doping and most of them pass on to the collector. This is the key point for its proper functioning.

The width of the flange of a T-beam, which may be considered to act effectively with the rib depends upon (A) Breadth of the rib (B) Overall thickness of the rib (C) Centre to centre distance between T-beams (D) All the above

Description : The width of the flange of a T-beam, which may be considered to act effectively with the rib depends upon (A) Breadth of the rib (B) Overall thickness of the rib (C) Centre to centre distance between T-beams (D) All the above

Last Answer : Answer: Option D

Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Description : Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Last Answer : (D) None of these

For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Last Answer : (6) electrical conductivity

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2 , the stresses developed are: (A) b = 10 N/mm2s = 20 N/mm2(B) b = 8 N/mm2s = 16 N/mm2(C) b = 6 N/mm2s = 12 N/mm2(D) b = 5 N/mm2s = 10 N/mm

Description : A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that  of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2  MN/mm2  and Eb = 0.1 ... 6 N/mm2 s  = 12 N/mm2 (D) b = 5 N/mm2 s  = 10 N/mm

Last Answer : (A) b = 10 N/mm2 s  = 20 N/mm

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Last Answer : (b) 12.88

A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Description : A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Last Answer : (c) outer surface of shaft

The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Description : The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Description : The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Description : Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Description : For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Last Answer : (B) Cross-sectional area

Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h

Description : Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h

Last Answer : 0.4-0.6 ha/h

For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases