The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

The number of moveable joints in the base, the arm, and the end effectors of the robot

determines_________

a) degrees of freedom

b) payload capacity

c) operational limits

d) flexibility
by

1 Answer

Answer :

a) degrees of freedom
by

Related questions

The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Last Answer : A : degrees of freedom

Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Description : Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Last Answer : a) peripheral tools

1. In a robot or manipulator comprises part is called ____________. o 1. Links o 2. Joints o 3. End-effectors o 4. None of the above

Description : 1. In a robot or manipulator comprises part is called ____________. o 1. Links o 2. Joints o 3. End-effectors o 4. None of the above

Last Answer : 1

The kinematic part of the robot or manipulator is called __________.  1. Links  2. Joints  3. End-effectors  4. None of the above

Description : The kinematic part of the robot or manipulator is called __________.  1. Links  2. Joints  3. End-effectors  4. None of the above

Last Answer : 2

The physical structure of Robot which moves around is called ____.  1. Manipulator  2. End-effectors  3. Joints

Description : The physical structure of Robot which moves around is called ____.  1. Manipulator  2. End-effectors  3. Joints

Last Answer : 1

5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movementd. Gripper 4. Delivers commands to the actuators (A) a-1, b-4, c-2, d-3 (B) a-3, b-4, c-2, d-1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Description : 5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movement d. Gripper 4. Delivers commands to the ... -1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Last Answer : B

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Last Answer : c) six

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Last Answer : b) controller

Which part of a robot provides motion to the manipulator and end-effectors?  1. Controller  2. Sensor  3. Actuator  4. All of the above

Description : Which part of a robot provides motion to the manipulator and end-effectors?  1. Controller  2. Sensor  3. Actuator  4. All of the above

Last Answer : 3

Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Description : Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Last Answer : d) roll

The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Description : The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Last Answer : d) Place block A on block B

What is the strong connective tissue that holds the bones together in moveable joints called?

Description : What is the strong connective tissue that holds the bones together in moveable joints called?

Last Answer : Feel Free to Answer

What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Description : What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Last Answer : c) work envelope

A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Description : A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Last Answer : c) manipulator

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Last Answer : C : Six

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Last Answer : C : Six

Which of the following statements appears most accurate in the light of our present knowledge of the neurophysiology underlying learning? Options: A) Learning involves neural fibres in a telephonic type connection between a given receptor and a given effectors B) Learning appears independent of any neurophysiologic basis C) Learning capacity to be independent of the mass of the brain D) To date, Psychologists have not been able to discover the neurophysilogical changes occurring as a person learns

Description : Which of the following statements appears most accurate in the light of our present knowledge of the neurophysiology underlying learning? Options: A) Learning involves neural fibres in a ... Psychologists have not been able to discover the neurophysilogical changes occurring as a person learns

Last Answer : D) To date, Psychologists have not been able to discover the neurophysilogical changes occurring as a person learns

Which of the following is the operational domain of CSA? a) Scalability b) Portability and interoperability c) Flexibility d) None of the mentioned

Description : Which of the following is the operational domain of CSA? a) Scalability b) Portability and interoperability c) Flexibility d) None of the mentioned

Last Answer : Portability and interoperability

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Last Answer : B : Controller

Diminished range of motion, loss of flexibility, stiffness, and loss of height are history and physical findings associated with agerelated changes of the a) joints. History and physical findings associated with age-related changes of the joints include diminished range of motion, loss of flexibility, stiffness, and loss of height.

Description : Diminished range of motion, loss of flexibility, stiffness, and loss of height are history and physical findings associated with agerelated changes of the a) joints. History and physical ... resolves with rest, crepitus, joint swelling/enlargement, and degenerative joint disease (osteoarthritis).

Last Answer : a) joints. History and physical findings associated with age-related changes of the joints include diminished range of motion, loss of flexibility, stiffness, and loss of height.

Computers normally solve problem by breaking them down into a series of yes-or-no decisions represented by 1s and 0s. What is the name of the logic that allows computers to assign numerical values that fail somewhere between 0 and 1? a) Human logic b) Fuzzy logic c) Boolean logic d) Operational logic

Description : Computers normally solve problem by breaking them down into a series of yes-or-no decisions represented by 1s and 0s. What is the name of the logic that allows computers to assign numerical values that fail ... 0 and 1? a) Human logic b) Fuzzy logic c) Boolean logic d) Operational logic

Last Answer : b) Fuzzy logic

Which of the following places would be LEAST likely to include operational robots? a) warehouse b) factory c) hospitals d) private homes

Description : Which of the following places would be LEAST likely to include operational robots? a) warehouse b) factory c) hospitals d) private homes

Last Answer : d) private homes

A computer program that contains expertise in a particular domain is called? a) intelligent planner b) automatic processor c) expert system d) operational symbolizer

Description : A computer program that contains expertise in a particular domain is called? a) intelligent planner b) automatic processor c) expert system d) operational symbolizer

Last Answer : c) expert system

Subject orientation A . The science of collecting, organizing, and applying numerical facts B. Measure of the probability that a certain hypothesis is incorrect given certain observations. C. One of the defining aspects of a data warehouse, which is specially built around all the existing applications of the operational data D . None of these

Description : Subject orientation A . The science of collecting, organizing, and applying numerical facts B. Measure of the probability that a certain hypothesis is incorrect given certain observations. C. ... specially built around all the existing applications of the operational data D . None of these

Last Answer : C. One of the defining aspects of a data warehouse, which is specially built around all the existing applications of the operational data

Flexibility of the retentive clasp arm does not relate to: A. Length B. Cross section C. Material D. Degree of taper E. Under cut area

Description : Flexibility of the retentive clasp arm does not relate to: A. Length B. Cross section C. Material D. Degree of taper E. Under cut area

Last Answer : E. Under cut area

Flexibility of the retentive clasp arm depends on: A. Length B. Cross section C. Material D. Degree of taper E. All of the above

Description : Flexibility of the retentive clasp arm depends on: A. Length B. Cross section C. Material D. Degree of taper E. All of the above

Last Answer : E. All of the above

A ____ is a rule of thumb, strategy, trick, simplification, or any other kind of device which drastically limits search for solutions in large problem spaces. A. Heuristic B. Critical C. Value based D. Analytical

Description : A ____ is a rule of thumb, strategy, trick, simplification, or any other kind of device which drastically limits search for solutions in large problem spaces. A. Heuristic B. Critical C. Value based D. Analytical

Last Answer : A. Heuristic 

If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Description : Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Last Answer : b) robots must never take actions harmful to humans

Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Description : Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Last Answer : a) pneumatic

What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Description : What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Last Answer : c) feedback

A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Description : A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Last Answer : d) Mars Hover (Robot Navigation)

Programming a robot by physically moving it through the trajectory you want it to follow is called _____________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Description : Programming a robot by physically moving it through the trajectory you want it to follow is called _____________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Last Answer : b) continuous-path control

Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Description : Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Last Answer : c) Shakey

Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Description : Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Last Answer : b) continuous-path control

What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Description : What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Last Answer : d) All of the mentioned

A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Description : A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Last Answer : b) Weak Artificial Intelligence approach

A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Description : A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Last Answer : c) model-based vision

In a robot the ‘Translotry Joints’ known as ____________1. Revolute  2. Prismatic  3. Cylindrical  4. Spherical

Description : In a robot the ‘Translotry Joints’ known as ____________ 1. Revolute  2. Prismatic  3. Cylindrical  4. Spherical

Last Answer : 2

In a robot the ‘Rotary Joints’ known as ____________.  1. revolute  2. Prismatic  3. Cylindrical  4. Spherical

Description : In a robot the ‘Rotary Joints’ known as ____________.  1. revolute  2. Prismatic  3. Cylindrical  4. Spherical

Last Answer : 1

Describe any two types of joints used in robotic arm and wrist

Description : Describe any two types of joints used in robotic arm and wrist

Last Answer : [1] Rotational joint [2] Linear joint [3] Twisting joint [4] Orthogonal & [5] Revolving joint Rotational Joint:Rotational joint can also be represented as R - Joint. This type will allow the ... the rotational axes. As like twisting joint, the output link spins about the input link.

Enlist types of joints used in robotic arm and draw sketch of any two

Description : Enlist types of joints used in robotic arm and draw sketch of any two

Last Answer : Types of Joints [1] Linear Joint or Prismatic joint [2] Orthogonal Joint [3] Rotational joint [4] Twisting Joint [5] Revolving joint

I want to have a party and project moveable images onto a large wall in my home...

Description : I want to have a party and project moveable images onto a large wall in my home...

Last Answer : If you wanna go true, 60’s psychedelic, get an old school projector (like the kind used for overheads in high school) and light up a petri dish full of oil and colored water. It’s a very simple technique that renders a real TRIPPY effect, man…

As per section 2, sub section 7 every kind of moveable property other than actionable Claim and money is called A. Goods B. Future goods C. Both (a) and (b) D. None of above

Description : As per section 2, sub section 7 every kind of moveable property other than actionable Claim and money is called A. Goods B. Future goods C. Both (a) and (b) D. None of above

Last Answer : A. Goods

Which one of the following is the way in which a galvanometer is converted into a voltmeter? Is it by connecting: w) a high resistance coil in parallel with its moveable coil x) a low resistance coil in parallel with its moveable coil y) a high resistance coil in series with its moveable coil z) a low resistance coil in series with its moveable coil

Description : Which one of the following is the way in which a galvanometer is converted into a voltmeter? Is it by connecting: w) a high resistance coil in parallel with its moveable coil x) a low resistance ... coil in series with its moveable coil z) a low resistance coil in series with its moveable coil 

Last Answer : ANSWER: Y -- A HIGH RESISTANCE COIL IN SERIES WITH ITS MOVEABLE COIL 

The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Last Answer : c.Speed of movement

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Last Answer : C

Can Arduino be used for building a robot arm?

Description : Can Arduino be used for building a robot arm?

Last Answer : Yes, Arduino can be used for building a robot arm by using servo motors and sensors to control the movement and position of the arm, and by using communication modules to receive commands from a remote control or a programming interface.

From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Description : From the following which type of work envelope is made in jointed arm robot a.Rectangular work envelope b.Cylindrical work envelope c.Spherical or hemispherical work envelope d.C

Last Answer : b.Cylindrical work envelope