Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework C. Areas used for guideline planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Which of the following areas CANNOT be determined by survey analysis of partially edentulous  cast?
A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework  
C. Areas used for guideline planes
D. Areas used for retention
E. Areas used for support
F. Depth of rest seats
by

1 Answer

Answer :

F. Depth of rest seats
by

Related questions

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Description : A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Last Answer : C. Distortion of impression

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Description : The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

Last Answer : A. Away from edentulous space

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Description : In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Last Answer : B. Assure predictable clasp retention

Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support of the distal extension D. Clasping at least two teeth for each edentulous area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension

Description : Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support ... area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension

Last Answer : C. Maintaining tissue support of the distal extension

What is Path of Removal: A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth B. The movement of the appliance from the points of initial contacts to path of final rest position

Description : What is Path of Removal: A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth B. The movement of the appliance from the points of initial contacts to path of final rest position

Last Answer : A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth

The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Description : The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Last Answer : B. Reciprocation

You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Description : You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Last Answer : A. Incorporating mesh work in wax pattern

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Last Answer : B. Contact the tooth under the survey line

In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Description : In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Last Answer : A. Contour the wax as part of the fabrication of the working cast

Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Description : Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Last Answer : B. To orient cast to surveyor

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

Ankyloglossia is caused by: A. Edentulous ridge B. Short lingual frenulum C. Short labial frenulum

Description : Ankyloglossia is caused by: A. Edentulous ridge B. Short lingual frenulum C. Short labial frenulum

Last Answer : B. Short lingual frenulum

Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Description : Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Last Answer : B. Increases when lower denture is inserted

Angular cheilitis in edentulous patient with complete denture is a result of: A. Deficiency of Rivoflavin vitamin B2 B. Low vertical dimension

Description : Angular cheilitis in edentulous patient with complete denture is a result of: A. Deficiency of Rivoflavin vitamin B2 B. Low vertical dimension

Last Answer : B. Low vertical dimension

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Description : How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Last Answer : B. Periodontal probe / Calibrated probe

To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of abutment towards the marginal ridge D. Be concave E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Description : To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of ... E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Last Answer : B. Slope from the marginal ridge towards contact?? of abutment

Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the dorsal surface radiating out from a central groove in the centre of the tongue C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas D. Irregularly outlined erythematous area of hyper trophic fungiform E. A fibrinous exudate on the dorsal surface F. Grooves (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Description : Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the ... (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue

Last Answer : C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas

18 years old female weighting 52Kg and 163cm tall. On dental examination erosion of teeth on the most of her lingual surfaces is clearly showing. Dietary history revealed a daily rate of 5000 to 7000 Kcal/day. What is the most probable diagnosis? A. Alcoholism B. Drug abuse C. Bulimia D. Excessive smoking E. Diabetic mellitus type I

Description : 18 years old female weighting 52Kg and 163cm tall. On dental examination erosion of teeth on the most of her lingual surfaces is clearly showing. Dietary history revealed a daily rate of 5000 to 7000 ... . Alcoholism B. Drug abuse C. Bulimia D. Excessive smoking E. Diabetic mellitus type I

Last Answer : C. Bulimia

Swallowing will aid in the diagnosis of: A. Branchial cyst B. Thyroglossal duct cyst C. Ranula D. Retention cyst E. Globulomaxillary cyst

Description : Swallowing will aid in the diagnosis of: A. Branchial cyst B. Thyroglossal duct cyst C. Ranula D. Retention cyst E. Globulomaxillary cyst

Last Answer : B. Thyroglossal duct cyst

Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding materials C. Is not a safe and simple method of bonding D. Bonding fails to produce a highly significant retention and good marginal integrity and clinical durability E. None of the above

Description : Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding ... highly significant retention and good marginal integrity and clinical durability E. None of the above

Last Answer : A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material

What does not show in Cleidocranial dysplasia:** A. Defective formation of clavicles B. Delayed closure of fontanelles C. Retention of maxilla D. Delayed eruption of permanent teeth E. None of the above

Description : What does not show in Cleidocranial dysplasia:** A. Defective formation of clavicles B. Delayed closure of fontanelles C. Retention of maxilla D. Delayed eruption of permanent teeth E. None of the above

Last Answer : E. None of the above

In regard to Universal currete what is true? a- You can use both ends equally. b- You can use one end only. c- Angle of shank and blade is 70 degrees. d- You can use it for specific area. e- It has very rigid handle.

Description : In regard to Universal currete what is true? a- You can use both ends equally. b- You can use one end only. c- Angle of shank and blade is 70 degrees. d- You can use it for specific area. e- It has very rigid handle.

Last Answer : a- You can use both ends equally.

Which of the following is true regarding preparation of custom tray for elastomeric impression: a. Adhesive is preferred over perforation. b. Perforation provides adequate retention c. Adhesive is applied immediately before procedure d. Perforations are not made in the area over the prepared tooth .

Description : Which of the following is true regarding preparation of custom tray for elastomeric impression: a. Adhesive is preferred over perforation. b. Perforation provides adequate retention c. Adhesive is ... before procedure d. Perforations are not made in the area over the prepared tooth .

Last Answer : a. Adhesive is preferred over perforation.

What is the property of high copper amalgam A. Reduced physical creep B. Higher retention

Description : What is the property of high copper amalgam A. Reduced physical creep B. Higher retention

Last Answer : A. Reduced physical creep

In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Description : In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls

Last Answer : B. Slightly done undercut of the buccal and lingual wall

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Description : Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Last Answer : A. Distribute the occlusal load

Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts

Last Answer : C. Buccal and lingual undercuts

Pin Restoration with which material has the best retention: A. Amalgam B. Gold inlay C. Composite D. Glass Ionomer

Description : Pin Restoration with which material has the best retention:  A. Amalgam  B. Gold inlay  C. Composite  D. Glass Ionomer 

Last Answer : C. Composite 

Angular type of bone resorption can be seen more often in:** A. Occlusal traumatism B. Food particles retention C. Periodontosis D. All of the above

Description : Angular type of bone resorption can be seen more often in:** A. Occlusal traumatism B. Food particles retention C. Periodontosis D. All of the above

Last Answer : D. All of the above

Where do Maryland bridges lose retention often: A. Resin-metal B. Resin enamel C. Resin layer

Description : Where do Maryland bridges lose retention often: A. Resin-metal B. Resin enamel C. Resin layer

Last Answer : A. Resin-metal

Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with conventional complete denture C. Alveolar bone resorption is reduced D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

.Which of the following is true regarding preparation of custom tray for elastomeric impression: A. Adhesive is preferred over perforation B. Perforation provides adequate retention C. Adhesive is applied immediately before procedure D. Perforations are not made in the area over the prepared tooth

Description : .Which of the following is true regarding preparation of custom tray for elastomeric impression: A. Adhesive is preferred over perforation B. Perforation provides adequate retention C. Adhesive is ... immediately before procedure D. Perforations are not made in the area over the prepared tooth

Last Answer : A. Adhesive is preferred over perforation

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be performed because it might damage the adjacent tooth C. When extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation

Last Answer : A. Always should be performed to minimise marginal leakage

The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Description : The retention pin in an amalgam restoration should be placed, A. Parallel to the outer wall B. Parallel to the long axis of tooth

Last Answer : A. Parallel to the outer wall

For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Description : For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Last Answer : A. reduce cusp by 2mm on a flat base for more resistance

In the construction of an RPD, guiding planes are created, A. Perpendicular to the occlusal plane B. Parallel towards the path of placement.

Description : In the construction of an RPD, guiding planes are created,  A. Perpendicular to the occlusal plane  B. Parallel towards the path of placement. 

Last Answer : B. Parallel towards the path of placement.

What of the following is TRUE regarding the placement of the movable component of the non-rigid connector in a fixed bridge: A. Should be placed on the longer retainer B. Mesial drift causes unseating of the distally placed connector What of the following is TRUE regarding the placement of the movable component of the non-rigid connector in a fixed bridge: A. Should be placed on the longer retainer B. Mesial drift causes unseating of the distally placed connector

Description : What of the following is TRUE regarding the placement of the movable component of the non-rigid connector in a fixed bridge: A. Should be placed on the longer retainer B. Mesial drift causes unseating of the distally placed connector

Last Answer : B. Mesial drift causes unseating of the distally placed connector

When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors C. Smaller connectors which connect denture components to the major connector D. The components of the denture base which provides reciprocation

Description : When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors ... components to the major connector D. The components of the denture base which provides reciprocation

Last Answer : C. Smaller connectors which connect denture components to the major connector

Worm gear are used for transmitting power between two Shaft Inclined at e. At right angle to each other and axes can intersect f. At right angle to each other but axis cannot intersect each other g. At right angle to each other and in different planes h. None of the above

Description : Worm gear are used for transmitting power between two Shaft Inclined at e. At right angle to each other and axes can intersect f. At right angle to each other but axis cannot intersect each other g. At right angle to each other and in different planes h. None of the above

Last Answer : f. At right angle to each other but axis cannot intersect each other

What are the airlines doing with the partially empty cargo holds on their planes?

Description : What are the airlines doing with the partially empty cargo holds on their planes?

Last Answer : If they reduce the size of carry-on, many people will still have to check bags.

The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was thickness) between denture and gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Description : The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was ... gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Last Answer : C. Make sure the framework and retainers are seated in place before taking impression

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages