How many gallons of oil do you use for heat a month?

How many gallons of oil do you use for heat a month?
by

1 Answer

Answer :

We used 130 gallons last month, but that was a little more than usual because it was a touch colder than normal. Usually 150 gallons goes about 45 days. The house is a 24’X60’ raised ranch. We set the thermostat at 58–60 when we’re gone or in bed and 68 when we’re home. We also have an electric heater and an electric mock fireplace in the living room that work very well. The conmbination of the electric bill and the oil bill are less since we got the fireplace, plus it looks nice.
by

Related questions

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

The energy consumption and production patterns in a chemical plant over a 9 month period is provided in the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 297 381 479 585 440 234 239 239 Energy Consumption MWh /month 78.2 75.7 76.3 76.1 78.1 70.7 73.7 64.4 72.1 Estimate the cumulative energy savings at end of the 9th month and give your inference on the result ? ( consider 9 month data for evaluation for predicted energy consumption)

Description : The energy consumption and production patterns in a chemical plant over a 9 month period is provided in  the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 ... and give your inference on the  result ? ( consider 9 month data for evaluation for predicted energy consumption)

Last Answer : It is required to use the equations Y= mX + C and  nC + mΣX = ΣY  cΣX + mΣX2 = ΣXY Month X =  Production in  Tonnes /  month Y =Energy  Consumption MWh  /month  X 2 XY 1 493 78.2 ... 73.7 54756 17240.63 8 239 64.4 57121 15402.96 9 239 72.1 57121 17228.98 3387 665.3 1410683 253221

In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant for the month Paper 1 –Set A with Solutions _______________________ Bureau of Energy Efficiency 6 is ------- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Last Answer : d) 60,000 kWh

How will the world replace the 29 billion barrels of oil we use each year?

Description : How will the world replace the 29 billion barrels of oil we use each year?

Last Answer : Sooner or later we will have to turn to alternative fuel sources. It is a truth we have to face.

When are oil producing countries going to run out of it and what impact would it have on that future world?

Description : When are oil producing countries going to run out of it and what impact would it have on that future world?

Last Answer : answer:They won't run out . That's the thing about oil in the ground: there will always be some amount more . It might be deeper, it might be more dispersed, it might be mixed ... . At that point, there would be no incentive to explore for deeper deposits or more complex refining methods.

How much money did the world spend on oil/petroleum in 2009?

Description : How much money did the world spend on oil/petroleum in 2009?

Last Answer : answer:Let me clarify for those of you who don't/didn't read the entire question, I want to know the TOTAL amount of money spent(in dollars) in the ENTIRE world. So basically you take every single ... of their revenues for the year, and that would be the amount I'm trying to figure out. Anyone?

How much are our wars increasing the demand for oil?

Description : How much are our wars increasing the demand for oil?

Last Answer : I’m completely speculating here but would it be fair to say that the closer we get to running out of entire global supplies, the more we will see military incursions to try to forcefully obtain remaining sources of oil?

Do you know what Pyrolytic Oil is?

Description : Do you know what Pyrolytic Oil is?

Last Answer : answer:google? wikipedia? what would prompt a question like this? http://en.wikipedia.org/wiki/Pyrolytic_oil

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

An oil fired boiler is retrofitted to fire coconut shell chips. Boiler thermal efficiency drops from 82% to 70%. What will be the percentage change in energy consumption to generate the same output a) 12% increase b) 14.6% increase c) 17.1% decrease d) 17.1% increase

Description : An oil fired boiler is retrofitted to fire coconut shell chips. Boiler thermal efficiency drops from 82% to 70%. What will be the percentage change in energy consumption to generate the same output a) 12% increase b) 14.6% increase c) 17.1% decrease d) 17.1% increase

Last Answer : d) 17.1% increase

Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil

Description : Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil

Last Answer : a) natural gas

What cities around the world use steam heat and what are the pros and cons?

Description : What cities around the world use steam heat and what are the pros and cons?

Last Answer : answer:Most municipal steam heating uses waste heat , that is, steam that has already been used in some process or other (typically electric power generation), but no longer has the pressure or ... it. That's not such a problem in the summer time, when maintenance outages are normally scheduled.

Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is retained in ETC iii) heat loss due to conduction back to atmosphere from ETC is high iv) performance of evacuated tube is highly dependent upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Description : Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is ... upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Last Answer : d) i & ii

Why don't they construct giant magnifying lenses to create heat and power?

Description : Why don't they construct giant magnifying lenses to create heat and power?

Last Answer : We already do This is probably what you pictured in your head, but it is exactly the same thing on a very large scale. excerpt Creating and storing power was the easy part. Far trickier was finding a way to deal with the stresses created by “radiation fluxes”

How many Wh of heat does each Hot Hands packet offer?

Description : How many Wh of heat does each Hot Hands packet offer?

Last Answer : answer:I do not have the absolute scientific answer for you but I do have a subjective one that might help others answer your question. First I commend you for asking the question in the form ... $0.00084 = ~ 0.1 cents Batteries and chemical heaters are very expensive when compared with electricity.

Does gravitational energy convert to heat?

Description : Does gravitational energy convert to heat?

Last Answer : Take this with a grain of salt, but wouldn’t the meteor not lose it’s gravitational potential energy until it’s converted to kinetic energy?

How can I convert electricity to heat?

Description : How can I convert electricity to heat?

Last Answer : run it through a coil of conductive yet resistant material. Copper would work. Don’t electrocute yourself!!!!

Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge stream is mixed with superheated steam at 400 0C, 1 atm and specific volume of 3.11 m 3 /kg. Calculate the amount of superheated steam at 300 0C produced and the volumetric flow rate of the 400 0C steam.

Description : Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C  and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge ... amount of superheated steam at 300 0C produced and the volumetric flow rate of the  400 0C steam.

Last Answer : Solution 1. Mass balance of water 1200 + m1 = m2 ………………………………………… (1) …………………….1 mark 2. Energy balance (1200 kg/h)(2676 kJ/kg) + m1(3278 kJ/kg)

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

The quantity of heat required to raise the temperature of a given substance by 1 oC is known as: a) sensible heat b) specific heat c) heat capacity d) latent heat

Description : The quantity of heat required to raise the temperature of a given substance by 1 oC is known as: a) sensible heat b) specific heat c) heat capacity d) latent heat

Last Answer : specific heat specific heat is the quantity of heat required to raise the temperature of 1 gram substance by 1 oC is

2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Description : 2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Last Answer : c) 5.97

Which of the following has the highest specific heat? a) lead b) mercury c) water d) alcohol

Description : Which of the following has the highest specific heat? a) lead b) mercury c) water d) alcohol

Last Answer : c) water

When to use dry batteries, when to use wet batteries, and where do you find them?

Description : When to use dry batteries, when to use wet batteries, and where do you find them?

Last Answer : In many cases, dry cell batteries are not rechargeable, where wet cell batteries are. Dry cell batteries were once used in old telephone systems and wet cell batteries are used in automobiles. ... means of absorbent material -from The New Century Dictionary, 1944 ed. Like a flashlight battery.

If you found out helmets were unnecessary, would you be more likely to use a bike sharing program in the city?

Description : If you found out helmets were unnecessary, would you be more likely to use a bike sharing program in the city?

Last Answer : Helmets do save lives. I think people should be able to choose for themselves but, one cannot dispute the safety factor. I've been a horse person most of my life and helmets are mandatory in any ... brain damaged. Bikes, motorcycles, horses, yep, a good idea even if they are hot and uncomfortable.

Is there technology that would allow us to use the Earth’s gravity and it’s force to solve the energy problems?

Description : Is there technology that would allow us to use the Earth’s gravity and it’s force to solve the energy problems?

Last Answer : Dog Are you shitting me? Before 10:00? This is way too profound.

How much kWh does a Laundromat use Monthly/Annually?

Description : How much kWh does a Laundromat use Monthly/Annually?

Last Answer : Wow, lots of variables to consider: Gas or electric dryers, volume of business, newer or older machines, etc. Here’s a worksheet that might help you.

Why not use Hemp to conquer the greenhouse effect and save the earth?

Description : Why not use Hemp to conquer the greenhouse effect and save the earth?

Last Answer : I don’t know! I use hemp (almost) for everything. I also use bamboo for a lot

How much energy does a ceiling fan use?

Description : How much energy does a ceiling fan use?

Last Answer : that depends on the model

Is it possible to use our feces to power our homes and cars?

Description : Is it possible to use our feces to power our homes and cars?

Last Answer : Have you ever smelled the exhaust from a vehicle adapted to run on bio-diesel? It smells kind of nice, like french fries. All I can think is what traffic would smell like if all the vehicles ran on fecal-diesel.

Assume CO2 equivalent emissions by the use of a 60 W incandescent lamp are of the order of 60 g/hr. If it is replaced by a 5 W LED lamp then the equivalent CO2 emissions will be a) nil b) 5 g/hr c) 12 g/hr d) 300 g/hr

Description : Assume CO2 equivalent emissions by the use of a 60 W incandescent lamp are of the order of 60 g/hr. If it is replaced by a 5 W LED lamp then the equivalent CO2 emissions will be a) nil b) 5 g/hr c) 12 g/hr d) 300 g/hr

Last Answer : b) 5 g/hr

Which of the following is not a part of energy audit as per the Energy Conservation Act, 2001? a) monitoring and analysis of energy use b) verification of energy use c) submission of technical report with recommendations d) ensuring implementation of recommended measures followed by review

Description : Which of the following is not a part of energy audit as per the Energy Conservation Act, 2001? a) monitoring and analysis of energy use b) verification of energy use c) submission of technical report with recommendations d) ensuring implementation of recommended measures followed by review

Last Answer : d) ensuring implementation of recommended measures followed by review

How Household Use Electricity And Energy

Description : How Household Use Electricity And Energy

Last Answer : I have often wondered what the average use of energy of appliances is. Here is a breakdown by percentage usage of each consuming appliance taken from a sampling of US households. Refrigerators 13.7% ... Telephone 0.2 Rechargeable Tools 0.2 Humidifier 0.1 Automobile Block Heater 0.0 Residual 7.3

State the use of Lux Meter and Tachometer in energy audit.

Description : State the use of Lux Meter and Tachometer in energy audit.

Last Answer : Use of lux meter – to measure intensity of light Use of tachometer – to measure speed

How do we use nuclear energy to generate electricity?

Description : How do we use nuclear energy to generate electricity?

Last Answer : nuclear energy is produce by nuclei of atom

If a house has solar panels and all energy is free, then is it ok to leave the lights on?

Description : If a house has solar panels and all energy is free, then is it ok to leave the lights on?

Last Answer : I think it would be wise to not waste any energy whether it's free or paid. Every electronic item has a limited working lifespan, if you were to run it all the time, it's gonna break very soon. Aside ... then the short answer is Yes . You can waste as much as you want since you own this energy.

Is the energy crisis real?

Description : Is the energy crisis real?

Last Answer : Who is calling it a crisis? We have plenty of energy here in the US. OPEC has been aggrresive at limiting supply and raising prices.

Why is there such a difference between highway and around town miles per gallon?

Description : Why is there such a difference between highway and around town miles per gallon?

Last Answer : Yes to starting and stopping. Gas is used to get up to speed; braking slows it down and repeat. Also on the highway you are in the top gear with fewer RPM’s less gas is used.

What branch of science does research into tachyon energy computing ?

Description : What branch of science does research into tachyon energy computing ?

Last Answer : Right after we reach “the speed of light”. We are close, to speed of light, with the Large Hadron Collider.

Is it possible to convert infrared energy into electricity?

Description : Is it possible to convert infrared energy into electricity?

Last Answer : Silicon solar cells can convert the shorter wavelengths of IR to electricity: https://www.solarquotes.com.au/blog/uv-solar-panels/ You can also concentrate solar IR and use the ... .com/innovationtoronto.com/wp-content/uploads/2015/12/Solar-Thermal-Power-Plant_forcetoknow.com_.jpg?resize=627%2C221

Which takes less energy?

Description : Which takes less energy?

Last Answer : Send this Q to LuckyGuy!

Why is it important to not mix brands of batteries in a device (whatever kind of device)

Description : Why is it important to not mix brands of batteries in a device (whatever kind of device)

Last Answer : It is the type of battery not the brand. Types of batteries include: Carbon Zinc, Alkaline, Rechargeable Alkaline, Li-Ion or NiCD.

Does Isis want to destroy the planet?

Description : Does Isis want to destroy the planet?

Last Answer : Your question details are a non sequitor to your question on ISIS. ISIS does not want to destroy the planet, just civilizations that it considers evil. But what the hell does that have to do with renewable energy? Besides, ISIS gets funding from oil sales.

Have they successfully converted energy to mass?

Description : Have they successfully converted energy to mass?

Last Answer : They?

How do you feel about the expansion of nuclear power as a zero CO2 emission energy alternative?

Description : How do you feel about the expansion of nuclear power as a zero CO2 emission energy alternative?

Last Answer : In general I am in favor of the newer Gen 3 and the future Gen 4 designs. Gen 1 and 2 now in the field are fossils. Yes, there is nuclear waste that we don'[t know how to handle ... never become the utopian Hydrogen society and nuclear waste will continue to fester for tens of thousands of years.

What to do if you feel that there is no energy to do something?

Description : What to do if you feel that there is no energy to do something?

Last Answer : Lying down without sleeping. Shorter power naps. Meditation. Changing your life situation so you aren’t upset about it. Taking breaks and stepping outside. Changing/improving your work location (lighting, noise, distractions, air quality). Various other personal developmental approaches.

Can you help with home heating question?

Description : Can you help with home heating question?

Last Answer : We don’t do homework questions here.

Why do we relate the square of the speed of light in energy?

Description : Why do we relate the square of the speed of light in energy?

Last Answer : You’re squaring the speed at which light travels, not light itself.

How can I figure out how much energy a hummingbird expends while hovering?

Description : How can I figure out how much energy a hummingbird expends while hovering?

Last Answer : answer:I don’t know all the formulas, but the approach to solving it is lift = load Since F= mA, and m = mass of a hummingbird and A = acceleration of gravity (32ft/sec/sec), the lift energy must be equal to the load force.

Alternative energy - why not an executive order that every new construction have solar panels?

Description : Alternative energy - why not an executive order that every new construction have solar panels?

Last Answer : I’d be down for that.