How do I get melted (and now hardened) plastic off of fabric?

1 Answer

Answer :

Here is one remedy that at least makes sense to me. I have not personally tried it, but I know melting the plastic again seems like it will be part of the process.

Related questions

Description : How would you figure out how much fabric is needed to make a knee length dress?

Last Answer : answer:The pattern should give a clear indication, because it will generally include the cutting requirements for the fabric (assuming it's not a patterned fabric that will require special cuts to carry a patterned ... for the last 50 years or so, from when Mom used to make some of our clothes.

Description : Where on your shirts/hoodies does the fabric wear out the fastest?

Last Answer : Cuffs—my cuffs wear so quickly that I usually wind up folding them over to cover the holes.

Description : What is the best way to secure fabric to a cork board?

Last Answer : Use all-purpose glue like Elmer’s.

Description : Can you tell me what this fabric is called?

Last Answer : answer:Nylon Spandex Sheer Stretch Mesh Fabric 82% Nylon, 18% Spandex 58/60 Inches Wide First Quality Fabric Here is a link.

Description : Thinking of making a sleeve for my iPad, what fabric should I use?

Last Answer : Maxi-Pads.

Description : How to find out if your fabric is made with nylon?

Last Answer : Take a tiny snip and light it. If it flares it is nylon, if it smolders it is cotton.

Description : Does anyone know where I can buy J.B. Martin velvet fabric?

Last Answer : The big fabric manufacturers are hard to pin down. I would recommend calling Britex in San Francisco and Baer Fabric in Louisville, KY ((502) 583-5521)

Description : Where can I buy large swaths of stretchy white fabric that I see at some underground parties?

Last Answer : Call britex right off of Union Square. They’ll help you.

Description : Popcorn Fabric?

Last Answer : Do you have a picture of the type of fabric you are looking for? The only time I have heard the term ‘popcorn fabric’ used is in regards to describing a chenille fabric pattern and that would not be material that stretches. It is usually used in bedspreads.

Description : How to Make Fabric Walls

Last Answer : Use LINIT® Starch OR LINIT® Starch-n-Crafts™ Stiffener instead of wallpaper paste and fabric instead of wallpaper. Starching leaves fewer bubbles in the fabric application.It can also be peeled off the wall ... easily, dampen the fabric with water using a wet sponge and it should come right off.

Description : Does anyone here work with ultra strong, light weight, waterproof fabrics?

Last Answer : Sunbrella is what we use for golf cart enclosures where I live. Is that too heavy? Not sure if it is waterproof or water repellent. It's very durable. Comes in many colors and patterns. https: ... store like JoAnne's fabrics. Here's one website. https://www.chicagocanvas.com/product/rip-stop-nylon/

Description : Does anyone know the specific name for this type of Hawaiian material?

Last Answer : answer:The type of fabric was originated by a man called Alfred Shaheen. The name of his fabric company was Surf n Sand Handprints. He was born in New Jersey, the son of a Lebanese immigrant ... with Gregory Tozian Aloha Attire Hawaiian Dress in the 20th Century Linda Arthur, Ph.D. Happy hunting!!

Description : What furniture person are you?

Last Answer : Action furniture: to suit my inactive lifestyle – recliners all the way.

Description : Any tips and tricks to keep my black clothes from fading and looking worn out?

Last Answer : They have detergent for black and dark clothes, but I’ve never used it to know how it works. I wash my clothes inside out, so the exterior doesn’t rub and get as worn out looking so quickly. As for the color, unfortunately, not much to do about that except wash it less, and that’s just nasty!

Description : How can I "revive" Velcro?

Last Answer : answer:Comb out the plastic part to remeove any fabric that is stuck in it. Light a match and quickly pass the fuzzy side over the heat to remelt the fibers. Try it on a small spot first.

Description : Where can I buy designer denim by the yard?

Last Answer : I think they are only designer because of someone's name sewn on the pocket. You should be able to buy good denim at most fabric stores. I used to sew jean jackets- not Levi rivets and ... . Blue jean denim is a particular cotton fabric died a particular blue. This is not google knowledge though.

Description : Do you wear tie-dye? Do you still wear tie-dye?

Last Answer : I used to, but my wife threw away (or possibly burnt) most of it.

Description : Can graduation robes be ironed?

Last Answer : Take it to a cleaners. Most are to delicate, I wouldn’t chance it.

Description : What is press cloth? (this question could also be called "Have you ever used "stitch witchery"? Can you help me?)

Last Answer : Yup! Anything rather thin, to protect your garment. An old pillowcase or washcloth will do.

Description : What is the origin and history behind the Paisley pattern?

Last Answer : There is a great wikipedia article on it. I have a teaching minor in textiles and I checked it over and it is exactly what I learned about it years ago in college. Just use the search term paisley.

Description : Why do black things, when bleached, turn orange?

Last Answer : answer:This is a guess based on my very limited knowledge of colour theory . It may have something to do with getting better results with dark colours if there is a strong presence of red. ... in the black composition is red/orange and those are therefore the most stubborn when removing the colour.

Description : How can I remove melted plastic wrap from a pan?

Last Answer : answer:Plastic wraps are usually made from either PVC or LDPE. PVC is soluble in MEK (sold at Home Depot in the paint section), and LDPE is soluble in acetone (also sold at Home Depot in the ... . It will need some soaking in the solvent. And both of these solvents are highly volatile and stinky.

Description : What do I use to remove the melted plastic from the stove top? See detail?

Last Answer : I'd open some windows turn on a fan and get some ventilation going, then turn on the stove and heat the plastic up, while constantly wiping with paper towels, or something else that's sturdy that you ... and putting it over a fire or grill outdoors so the burning plastic doesn't stink up your home.

Description : Is it okay to use a pot with melted plastic in it?

Last Answer : You’ll be ingesting plastic if you leave it there.

Last Answer : The thermosetting polymer can be sized and melted only once

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

Description : While playing with a metal washer shaped like a ring, Dave accidently pushed it on his finger too far and couldn't get it off. Trying to remove it using soap and water didn't work. The hospital ... and suggested an easy way to remove the washer in just a few minutes. What was his solution? -Riddles

Last Answer : Bob suggested that Dave hold his finger in the air while someone wound a piece of string tightly around his finger just above the metal ring. The string forced the swelling down. As they ... the ring up. They continued winding and unwinding the string until the ring could be easily removed.

Description : How do I get melted crayon off of coins?

Last Answer : Dump them on a metal cookie sheet and place in the freezer for a few days. The wax crayon will become brittle and should chip off easily.

Description : How would you define an insignificant person? (Don't tell me about hardened criminals, please.)

Last Answer : That in 30 billion years the universe will tear in to nothingness, destroying time, space, and everything else, thus rendering all human endeavour totally pointless.

Description : Not born, but from a Mother's body drawn, I hang until half of me is gone. I sleep in a cave until I grow old, then valued for my hardened gold. What am I? -Riddles

Last Answer : Cheese.

Description : What actions by President Lincoln after the Battle of Antietam hardened General McClellan's opposition to Lincoln?

Last Answer : On September 24, following the Battle of Antietam, took steps tominimize opposition to members of the Northern peace movement. Manyof these individuals were also Southern ... with the Preliminary EmancipationProclamation, caused McClellan to formulate plans to resist thesenew developments.

Description : What is flavored syrup hardened into small pieces for eating?

Last Answer : Boiled sweets.

Description : Borstal Jails/ Institutions are meant for: A. Women Prisoners B. Condemned Prisoners C. Juvenile Prisoners D. Hardened Prisoners

Last Answer : ANSWER: C

Description : Coal is formed from – (1) crude oil (2) deposit of animal waste (3) coke (4) compressed and hardened biomass

Last Answer : (4) compressed and hardened biomass Explanation: A fossil fuel, coal forms when dead plant matter is converted into peat, which in turn is converted into lignite, then subbituminous coal, ... lastly anthracite: This involves biological and geological processes that take place over a long period.

Description : In vulcanisation process, rubber can be hardened by adding - (1) Nitrogen (2) Silicon (3) Sulphur (4) Alcohol

Last Answer : (3) Sulphur Explanation: In order to give more strength and more elasticity, natural rubber is heated with sulphur or sulphur compounds at 150°C temperature. Vulcanized rubber has good tensile strength.

Description : A hardened steel essentially contains (A) Sorbite (B) Troostite (C) Martensite (D) None of these

Last Answer : (C) Martensite

Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these

Last Answer : (B) Tempering

Description : Lead (A) Is the hardest metal in common use (B) Is the lightest metal in common use (C) Cannot be scratched by finger nails (D) Cannot be work hardened

Last Answer : (D) Cannot be work hardened

Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (B) Tempering

Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (B) Tempering

Description : To obtain softness and ductility, metals art a) tempered b) hardened c) enamelled d) hard faced

Last Answer : b) hardened

Description : _________ is the hardest material out of the following. (A) Boron carbide (B) Tungsten carbide (C) Hardened steel (D) Silicon carbide

Last Answer : (A) Boron carbide

Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising

Last Answer : (A) Normalising

Description : To counteract the bad effects of strain hardening on a cold formed part, it must be (A) Tempered (B) Normalised (C) Annealed (D) Hardened

Last Answer : Option C

Description : Sub zero treatment of steel is done to (A) Suppress martensite transformation (B) Enhance its working performance in sub zero atmosphere (C) Reduce the retained austenite in hardened steel (D) Induce temper brittleness after its hardening

Last Answer : Option C

Description : The disc is made from of 5mm-10mm thickness. a) Heat treated steel b) Case hardened steel c) Stainless steel d) High speed steel

Last Answer : Heat treated steel

Description : Indicate which of the following material does not retain magnetism permanently. (a) Soft iron (b) Stainless steel (e) Hardened steel (d) None of the above

Last Answer : (a) Soft iron

Description : Copper as conductor for cables is used as (a) annealed (b) hardened and tempered (c) hard drawn (d) alloy with chromium

Last Answer : (a) annealed

Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Last Answer : a. Soft centre steel