Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Before a disk drive can access any sector record, a computer program has to provide the  record’s disk address. What information does this address specify?
a. Track number
b. Sector number
c. Surface number
d. All of above
by

1 Answer

Answer :

d. All of above
by

Related questions

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? A) Track number B) Sector number C) Surface number D) All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? A) Track number B) Sector number C) Surface number D) All of above

Last Answer : Answer : D

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : Track number

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

Which of the following is not true for a magnetic disk? a. It is expensive relative to magnetic tape b. It provides only sequential access to stored data c. Users can easily update records by writing over the old data d. All of above

Description : Which of the following is not true for a magnetic disk? a. It is expensive relative to magnetic tape b. It provides only sequential access to stored data c. Users can easily update records by writing over the old data d. All of above

Last Answer : b. It provides only sequential access to stored data

The magnetic storage chip used to provide non-volatile direct access storage of data and that have no moving parts are known as a. Magnetic core memory b. Magnetic tape memory c. Magnetic disk memory d. Magnetic bubble memory

Description : The magnetic storage chip used to provide non-volatile direct access storage of data and that have no moving parts are known as a. Magnetic core memory b. Magnetic tape memory c. Magnetic disk memory d. Magnetic bubble memory

Last Answer : a. Magnetic core memory

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Description : Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Last Answer : a. Read/write leads

What does the disk drive of a computer do? a. Rotate the disk b. Read the disk c. Load a program from the disk into the memory d. Both b and c

Description : What does the disk drive of a computer do? a. Rotate the disk b. Read the disk c. Load a program from the disk into the memory d. Both b and c

Last Answer : d. Both b and c

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Last Answer : d. Program Register

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector

Description : Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector

Last Answer : a. Time to spin the needed data under head

Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Description : Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Last Answer : a. time to position the head over proper track

Most of the inexpensive personal computer does not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computer d. General computer

Description : Most of the inexpensive personal computer does not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computer d. General computer

Last Answer : a. Home computers

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : Access arm

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

A name or number used to identify a storage location is called a. A byte b. A record c. An address d. All of above

Description : A name or number used to identify a storage location is called a. A byte b. A record c. An address d. All of above

Last Answer : c. An address

A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Description : A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Last Answer : c. An address

When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is transferred to the program counter c. two data bytes stored in the top two locations of the stack are transferred to the program counter d. two data bytes stored in the top two locations of the stack are transferred to the stack pointer

Description : When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is ... two data bytes stored in the top two locations of the stack are transferred to the stack pointer

Last Answer : c. two data bytes stored in the top two locations of the stack are transferred to the program counter

Most of the inexpensive personal computers do not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computers d. General purpose computers

Description : Most of the inexpensive personal computers do not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computers d. General purpose computers

Last Answer : a. Home computers

The two basic types of record-access methods are a. Sequential and random b. Sequential and indexed c. Direct and immediate d. On-line and real time

Description : The two basic types of record-access methods are a. Sequential and random b. Sequential and indexed c. Direct and immediate d. On-line and real time

Last Answer : a. Sequential and random

A 32-bit address bus allows access to a memory of capacity(a) 64 Mb (b) 16 Mb (c) 1Gb (d) 4 Gb 2.Which processor structure is pipelined? a) all x80 processors b) all x85 processors c) all x86 processors

Description : A 32-bit address bus allows access to a memory of capacity(a) 64 Mb (b) 16 Mb (c) 1Gb (d) 4 Gb 2.Which processor structure is pipelined? a) all x80 processors b) all x85 processors c) all x86 processors

Last Answer : c) all x86 processors

A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Description : A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Last Answer : d. Address register

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Description : Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Last Answer : d. All of above

A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is

Description : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is  (a) 1 GB (b) 100 MB (c) 10 MB (d) 10 GB

Last Answer : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is 1 GB

Before a disk can be used to store data. It must be……. a. Formatted b. Reformatted c. Addressed d. None of the above

Description : Before a disk can be used to store data. It must be……. a. Formatted b. Reformatted c. Addressed d. None of the above

Last Answer : a. Formatted

The ALU of a computer normally contains a number of high speed storage element called a. Semiconductor memory b. Registers c. Hard disks d. Magnetic disk

Description : The ALU of a computer normally contains a number of high speed storage element called a. Semiconductor memory b. Registers c. Hard disks d. Magnetic disk

Last Answer : b. Registers

When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the a. stack pointer b. accumulator c. program counter d. stack

Description : When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the a. stack pointer b. accumulator c. program counter d. stack

Last Answer : d. stack

Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter

Description : Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter

Last Answer : c. Instruction registers

Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address registers b. Memory data registers c. Instruction register d. Program counter

Description : Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address registers b. Memory data registers c. Instruction register d. Program counter

Last Answer : c. Instruction register

The subprogram finish the return instruction recovers the return address from the: a. Queue b. Stack c. Program counter d. Pointer

Description : The subprogram finish the return instruction recovers the return address from the: a. Queue b. Stack c. Program counter d. Pointer

Last Answer : b. Stack

The point where control returns after a subprogram is completed is known as the : a. Return address b. Main Address c. Program Address d. Current Address

Description : The point where control returns after a subprogram is completed is known as the : a. Return address b. Main Address c. Program Address d. Current Address

Last Answer : a. Return address

Which of the following is not true for a magnetic disk? A) It is expensive relative to magnetic tape B) It provides only sequential access to stored data C) Users can easily update records by writing over the old data D) All of above

Description : Which of the following is not true for a magnetic disk? A) It is expensive relative to magnetic tape B) It provides only sequential access to stored data C) Users can easily update records by writing over the old data D) All of above

Last Answer : Answer : B

Which of the following is not true for a magnetic disk? a. It is expensive relative to magnetic tape b. It provides only sequential access to stored data c. Users can easily update records by writing over the old data d. All of above

Description : Which of the following is not true for a magnetic disk? a. It is expensive relative to magnetic tape b. It provides only sequential access to stored data c. Users can easily update records by writing over the old data d. All of above

Last Answer : It provides only sequential access to stored data

Which among the following is correct regarding the Boot Sector Viruses: a) These viruses are resides in the boot sector of a floppy or hard disk. b) Such viruses are activated every time a computer boots from an infected disk c) Virus remains in memory until an uninfected floppy disk is inserted into the floppy drive d) All of the Above e) None of These

Description : Which among the following is correct regarding the Boot Sector Viruses: a) These viruses are resides in the boot sector of a floppy or hard disk. b) Such viruses are activated every time a computer ... uninfected floppy disk is inserted into the floppy drive d) All of the Above e) None of These

Last Answer : d) All of the Above

Where does a computer add and compare data? a. Hard disk b. Floppy disk c. CPU chip d. Memory chip

Description : Where does a computer add and compare data? a. Hard disk b. Floppy disk c. CPU chip d. Memory chip

Last Answer : c. CPU chip

Which part of the computer is used for calculating and comparing? a. Disk unit b. Control unit c. ALU d. Modem

Description : Which part of the computer is used for calculating and comparing? a. Disk unit b. Control unit c. ALU d. Modem

Last Answer : c. ALU

The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Last Answer : d. Modem

IMB launched its first personal computer called IBM-PC in 1981. It had chips from Intel, disk drives from Tandon, operating system from Microsoft, the printer from Epson and the application software from everywhere. Can you name the country which contributed the video display? a. India b. China c. Germany d. Taiwan

Description : IMB launched its first personal computer called IBM-PC in 1981. It had chips from Intel, disk drives from Tandon, operating system from Microsoft, the printer from Epson and the application software from ... country which contributed the video display? a. India b. China c. Germany d. Taiwan

Last Answer : b. China

What kind of storage allows you to access the 125th record without having to read the 124 records in front of it?

Description : What kind of storage allows you to access the 125th record without having to read the 124 records in front of it?

Last Answer : Direct-access storage.

............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Description : ............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Last Answer : A) Seek time

Which of the following is true? a. Fields are composed of bytes b. Records are composed of fields c. Fields are composed of characters d. All of above

Description : Which of the following is true? a. Fields are composed of bytes b. Records are composed of fields c. Fields are composed of characters d. All of above

Last Answer : d. All of above

A characteristic of card systems is: a. Slowness in processing data b. Using cards as records of transactions c. Needing a larger DP staff d. All of the above

Description : A characteristic of card systems is: a. Slowness in processing data b. Using cards as records of transactions c. Needing a larger DP staff d. All of the above

Last Answer : d. All of the above

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be A) 216 B) 65,536 C) 64K D) Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be A) 216 B) 65,536 C) 64K D) Any of the above

Last Answer : Answer : B

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : 65,536

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : b. 65,536

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.