Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector

Latency time is
a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector
by

1 Answer

Answer :

a. Time to spin the needed data under head
by

Related questions

Latency time is A) Time to spin the needed data under head B) Time to spin the needed data under track C) Time to spin data under sector D) All of above

Description : Latency time is A) Time to spin the needed data under head B) Time to spin the needed data under track C) Time to spin data under sector D) All of above

Last Answer : Answer : A

Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector d. All of above

Description : Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector d. All of above

Last Answer : Time to spin the needed data under head

Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Description : Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Last Answer : a. time to position the head over proper track

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

Access time is a. seek time + latency time b. seek time c. seek time – latency time d. latency time

Description : Access time is a. seek time + latency time b. seek time c. seek time – latency time d. latency time

Last Answer : a. seek time + latency time

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Last Answer : d. Program Register

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Description : Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Last Answer : a. Read/write leads

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Description : ............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Last Answer : A) Seek time

Seek time is A) time to position the head over proper track B) time to position the head over proper sector C) time to position the head over proper cylinder D) none of above

Description : Seek time is A) time to position the head over proper track B) time to position the head over proper sector C) time to position the head over proper cylinder D) none of above

Last Answer : Answer : A

Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Description : Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Last Answer : time to position the head over proper track

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these

Description : The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these

Last Answer : a. Stack pointer register

What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Last Answer : c. Bus arbitration

How many address lines are needed to address each memory locations in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Description : How many address lines are needed to address each memory locations in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Last Answer : b. 11

How many address lines are needed to address each memory location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Description : How many address lines are needed to address each memory location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Last Answer : b. 11

how many address lines are needed to address each machine location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Description : how many address lines are needed to address each machine location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Last Answer : b. 11

In Bluetooth, the_____ link is used when data integrity is more important than avoiding latency. A) SCO B) ACL C) ACO D) SCL

Description : In Bluetooth, the_____ link is used when data integrity is more important than avoiding latency. A) SCO B) ACL C) ACO D) SCL

Last Answer : ACL

In Bluetooth, the_____ link is used when avoiding latency (delay in data delivery) is more important than integrity (error-free delivery). A) SCO B) ACL C) ACO D) SCL

Description : In Bluetooth, the_____ link is used when avoiding latency (delay in data delivery) is more important than integrity (error-free delivery). A) SCO B) ACL C) ACO D) SCL

Last Answer : SCO

Geographic distribution of data across a cloud provider'’ network is a problem for many enterprises because it: A. Breaks compliance regulations B. Adds latency C. Raises security concerns D. Makes data recovery harder

Description : Geographic distribution of data across a cloud provider'’ network is a problem for many enterprises because it: A. Breaks compliance regulations B. Adds latency C. Raises security concerns D. Makes data recovery harder

Last Answer : Breaks compliance regulations

Geographic distribution of data across a cloud provider’s network is a problem for many enterprises because it: A. Breaks compliance regulations B. Adds latency C. Raises security concerns D. Makes data recovery harder

Description : Geographic distribution of data across a cloud provider’s network is a problem for many enterprises because it: A. Breaks compliance regulations B. Adds latency C. Raises security concerns D. Makes data recovery harder

Last Answer : Breaks compliance regulations

Point out the correct statement. a) Google’s cloud includes perhaps some 10 data centers worldwide b) Flipkart.com’s infrastructure was built to support elastic demand so the system could accommodate peak traffic c) Data centers have been sited to optimize the overall system latency d) All of the mentioned

Description : Point out the correct statement. a) Google's cloud includes perhaps some 10 data centers worldwide b) Flipkart.com's infrastructure was built to support elastic demand so the system could accommodate ... ) Data centers have been sited to optimize the overall system latency d) All of the mentioned

Last Answer : Data centers have been sited to optimize the overall system latency

Pipelining improves performance by: (A) decreasing instruction latency (B) eliminating data hazards (C) exploiting instruction level parallelism (D) decreasing the cache miss rate

Description : Pipelining improves performance by: (A) decreasing instruction latency (B) eliminating data hazards (C) exploiting instruction level parallelism (D) decreasing the cache miss rate

Last Answer : (C) exploiting instruction level parallelism

True statements about saccadic eye movements include: a. only occur when the patient is awake b. the velocity is under voluntary control c. the maximum velocity is 700 degrees / second d. it has a latency of 250msec

Description : True statements about saccadic eye movements include: a. only occur when the patient is awake b. the velocity is under voluntary control c. the maximum velocity is 700 degrees / second d. it has a latency of 250msec

Last Answer : the maximum velocity is 700 degrees / second

To replace a ball with another ball by collision, a snooker player must consider the condition that A. the collision must be head on B. The moving ball must not be given any spin C. both A and B D. no conditions required

Description : To replace a ball with another ball by collision, a snooker player must consider the condition that A. the collision must be head on B. The moving ball must not be given any spin C. both A and B D. no conditions required

Last Answer : both A and B

The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU

Description : The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU

Last Answer : C. address decoder

In the third Generation of computers a. Distributed data processing first became popular b. An operating system was first developed c. High level procedural language were first used d. Online real time systems first become popular

Description : In the third Generation of computers a. Distributed data processing first became popular b. An operating system was first developed c. High level procedural language were first used d. Online real time systems first become popular

Last Answer : d. Online real time systems first become popular

A storage device whe3re the access time is depended upon the location of the data is a. Random access b. Serial access c. Sequential access d. Transaction access

Description : A storage device whe3re the access time is depended upon the location of the data is a. Random access b. Serial access c. Sequential access d. Transaction access

Last Answer : b. Serial access

The primary advantage of key-to-tape data entry system is a. A large percentage of editing can be performed at the time of data entry b. Key verification is easily performed c. The tape is reusable

Description : The primary advantage of key-to-tape data entry system is a. A large percentage of editing can be performed at the time of data entry b. Key verification is easily performed c. The tape is reusable

Last Answer : c. The tape is reusable

In the third generation of computers: a. Distributed data processing first became popular b. An operating system was first developed c. High-level prcedu7ral languages were firs used d. On-line, real time systems first became popular

Description : In the third generation of computers: a. Distributed data processing first became popular b. An operating system was first developed c. High-level prcedu7ral languages were firs used d. On-line, real time systems first became popular

Last Answer : d. On-line, real time systems first became popular

How does the microprocessor differentiate between data and instruction

Description : How does the microprocessor differentiate between data and instruction

Last Answer : When the first m/c code of an instruction is fetched and decoded in the instruction register, the microprocessor recognizes the number of bytes required to fetch the entire ... will be considered as data & the byte after the data will be treated as the next instruction.

What are operations performed on data in 8085

Description : What are operations performed on data in 8085

Last Answer : The various operations performed are • Store 8-bit data • Perform arithmetic and logical operations • Test for conditions • Sequence the execution of instructions • Store data temporarily during execution in the defined R/W memory locations called the stack

___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Description : ___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Last Answer : b. Cache memory

Which is an integral part of any microcomputer system and its primary purpose is to hold program and data: a. Memory unit b. Register unit c. A and B d. None of these

Description : Which is an integral part of any microcomputer system and its primary purpose is to hold program and data: a. Memory unit b. Register unit c. A and B d. None of these

Last Answer : a. Memory unit

System Bus Contains: a. Address Bus b. Data Bus c. Control Bus d. All of these

Description : System Bus Contains: a. Address Bus b. Data Bus c. Control Bus d. All of these

Last Answer : d. All of these

When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is transferred to the program counter c. two data bytes stored in the top two locations of the stack are transferred to the program counter d. two data bytes stored in the top two locations of the stack are transferred to the stack pointer

Description : When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is ... two data bytes stored in the top two locations of the stack are transferred to the stack pointer

Last Answer : c. two data bytes stored in the top two locations of the stack are transferred to the program counter

The ascending order or a data Hierarchy is a. bit - bytes - fields - record - file - database b. bit - bytes - record - field - file - database c. bytes - bit- field - record - file - database d. bytes -bit - record - field - file - database

Description : The ascending order or a data Hierarchy is a. bit - bytes - fields - record - file - database b. bit - bytes - record - field - file - database c. bytes - bit- field - record - file - database d. bytes -bit - record - field - file - database

Last Answer : a. bit - bytes - fields - record - file - database

What is the control unit's function in the CPU? a. To transfer data to primary storage b. to store program instruction c. to perform logic operations d. to decode program instruction

Description : What is the control unit's function in the CPU? a. To transfer data to primary storage b. to store program instruction c. to perform logic operations d. to decode program instruction

Last Answer : b. to store program instruction

CPU does not perform the operation a. data transfer b. logic operation c. arithmetic operation d. all of above

Description : CPU does not perform the operation a. data transfer b. logic operation c. arithmetic operation d. all of above

Last Answer : b. logic operation

Where does a computer add and compare data? a. Hard disk b. Floppy disk c. CPU chip d. Memory chip

Description : Where does a computer add and compare data? a. Hard disk b. Floppy disk c. CPU chip d. Memory chip

Last Answer : c. CPU chip

The first firm to mass-market a microcomputer as a personal computer was a. IBM b. Super UNIVAC c. Radio Shaks d. Data General Corporation

Description : The first firm to mass-market a microcomputer as a personal computer was a. IBM b. Super UNIVAC c. Radio Shaks d. Data General Corporation

Last Answer : c. Radio Shaks

Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter

Description : Which of the following registers is loaded with the contents of the memory location pointed by the PC? a. Memory address register b. Memory data register c. Instruction registers d. Program counter

Last Answer : c. Instruction registers

The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Description : The most commonly used standard data code to represent alphabetical, numerical and punctuation characters used in electronic data processing system is called a. ASCII b. EBCDIC c. BCD d. All of above

Last Answer : a. ASCII

A computer programmer a. Dies all the thinking for a compute b. Can enter input data quickly c. Can operate all types of computer equipment d. Can draw only flowchart

Description : A computer programmer a. Dies all the thinking for a compute b. Can enter input data quickly c. Can operate all types of computer equipment d. Can draw only flowchart

Last Answer : a. Dies all the thinking for a compute

computer operators a. writes computer programs for specific problems b. operate the device which input and output data from the computer c. normally require a college degree in computer science d. all of the above

Description : computer operators a. writes computer programs for specific problems b. operate the device which input and output data from the computer c. normally require a college degree in computer science d. all of the above

Last Answer : b. operate the device which input and output data from the computer

Which computer memory is used for storing programs and data currently being processed by the CPU? a. Mass memory b. Internal memory c. Non-volatile memory d. PROM

Description : Which computer memory is used for storing programs and data currently being processed by the CPU? a. Mass memory b. Internal memory c. Non-volatile memory d. PROM

Last Answer : b. Internal memory

Can you tell what passes into and out from the computer via its ports? a. Data b. Bytes c. Graphics d. Pictures

Description : Can you tell what passes into and out from the computer via its ports? a. Data b. Bytes c. Graphics d. Pictures

Last Answer : a. Data