Reading data is performed in magnetic disk by a. Read/write leads
b. Sectors
c. Track
d. Lower surface

1 Answer

Answer :

a. Read/write leads

Related questions

Description : Reading data is performed in magnetic disk by A) Read/write leads B) Sectors C) Track D) Lower surface

Last Answer : Answer : A

Description : Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Last Answer : Read/write leads

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

Description : . A floppy disk contains a. Circular tracks only b. Sectors only c. Both circular tracks and sectors d. All of the above

Last Answer : c. Both circular tracks and sectors

Description : A floppy disk contains a. Circular tracks only b. Sectors only c. Both circular tracks and sectors d. All of the above

Last Answer : c. Both circular tracks and sectors

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

Description : Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Last Answer : d. All of above

Description : Which most popular input device is used today for interactive processing and for the one line entry of data for batch processing? a. Mouse b. Magnetic disk c. Visual display terminal d. Card punch

Last Answer : a. Mouse

Description : The magnetic storage chip used to provide non-volatile direct access storage of data and that have no moving parts are known as a. Magnetic core memory b. Magnetic tape memory c. Magnetic disk memory d. Magnetic bubble memory

Last Answer : a. Magnetic core memory

Description : Which of the following is not true for a magnetic disk? a. It is expensive relative to magnetic tape b. It provides only sequential access to stored data c. Users can easily update records by writing over the old data d. All of above

Last Answer : b. It provides only sequential access to stored data

Description : CD-ROM stands for a. Compactable Read Only Memory b. Compact Data Read Only Memory c. Compactable Disk Read Only Memory d. Compact Disk Read Only Memory

Last Answer : d. Compact Disk Read Only Memory

Description : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is  (a) 1 GB (b) 100 MB (c) 10 MB (d) 10 GB

Last Answer : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is 1 GB

Description : Which of the following is not a primary storage device? a. Magnetic tape b. Magnetic disk c. Optical disk d. None of the above

Last Answer : d. None of the above

Description : A disk storage medium in the form of an assembly containing a single rigid magnetic disk permanently is a. Fixed disk b. Disk cartridge c. Card punch d. Card reader

Last Answer : b. Disk cartridge

Description : The ALU of a computer normally contains a number of high speed storage element called a. Semiconductor memory b. Registers c. Hard disks d. Magnetic disk

Last Answer : b. Registers

Description : Which of the following is not a primary storage device? a. Magnetic tape b. Magnetic disk c. Optical disk d. None of above

Last Answer : d. None of above

Description : Hard disk is coated in both side above a. Magnetic metallic oxide b. Optical metallic oxide c. Carbon layer d. All of the above

Last Answer : a. Magnetic metallic oxide

Description : What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Last Answer : a. 9

Description : What does the disk drive of a computer do? a. Rotate the disk b. Read the disk c. Load a program from the disk into the memory d. Both b and c

Last Answer : d. Both b and c

Description : What are operations performed on data in 8085

Last Answer : The various operations performed are • Store 8-bit data • Perform arithmetic and logical operations • Test for conditions • Sequence the execution of instructions • Store data temporarily during execution in the defined R/W memory locations called the stack

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

Description : The primary advantage of key-to-tape data entry system is a. A large percentage of editing can be performed at the time of data entry b. Key verification is easily performed c. The tape is reusable

Last Answer : c. The tape is reusable

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory Address Register b. Memory Data Register c. Instruction Register d. Program Register

Last Answer : d. Program Register

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : d. Program counter

Description : Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector

Last Answer : a. Time to spin the needed data under head

Description : Where does a computer add and compare data? a. Hard disk b. Floppy disk c. CPU chip d. Memory chip

Last Answer : c. CPU chip

Description : Before a disk can be used to store data. It must be……. a. Formatted b. Reformatted c. Addressed d. None of the above

Last Answer : a. Formatted

Description : What is the latest write-once optical storage media? a. Digital paper b. Magneto-optical disk c. WORM disk d. CD-ROM disk

Last Answer : d. CD-ROM disk

Description : The CPU sends out a ____ signal to indicate that valid data is available on the data bus: a. Read b. Write c. Both A and B

Last Answer : b. Write

Description : When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Last Answer : b. Output

Description : CPU can read & write data by using : a. Control bus b. Data bus c. Address bus d. None of these

Last Answer : b. Data bus

Description : In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Last Answer : c) A0, RD & WR, CS

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : Access arm

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

Description : What are the three decisions making operations performed by the ALU of a computer? a. Grater than b. Less than c. Equal to d. All of the above

Last Answer : d. All of the above

Description : Which operation is not performed by computer a. Inputting b. Processing c. Controlling d. Understanding

Last Answer : d. Understanding

Description : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Last Answer : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Description : The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Last Answer : d. 8-bit EBCDIC

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

Description : When we move from the outermost track to the innermost track in a magnetic disk, then density (bits per linear inch)  (1) decreases (2) increases (3) remains the same (4) either remains constant or decreases

Last Answer : increases

Description : The lower red curvy arrow show that CPU places the address extracted from the memory location on the_____: a. Address bus b. System bus c. Control bus d. Data bus

Last Answer : a. Address bus

Description : Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Last Answer : a. time to position the head over proper track

Description : The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these

Last Answer : a. Stack pointer register

Description : Most of the inexpensive personal computer does not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computer d. General computer

Last Answer : a. Home computers

Description : Which of the following is a secondary memory device? a. Keyboard b. Disk c. ALU d. All of the above

Last Answer : b. Disk

Description : Which part of the computer is used for calculating and comparing? a. Disk unit b. Control unit c. ALU d. Modem

Last Answer : c. ALU