Description : T1 stands fo
Last Answer : Transmission one
Description : Involves compression in the transmitter after the input sample has been converted to a linear PCM code and then expansion in the receiver prior to PCM coding:
Last Answer : Digital companding
Description : Sampling technique that when the tops of the sample pulses retain their natural shape during the sample interva
Last Answer : natural sampling
Description : Type of PCM which is designed to take advantage of the sample-to-sample redundancies in the typical speech waveform
Last Answer : Differential PCM
Description : n digital modulation, it is similar to standard amplitude modulation except there is only two amplitudes possible.
Last Answer : amplitude shift keying
Description : A(n) ________function creates a message digest out of a message.
Last Answer : hash
Description : A 4.5-MHz signal which is equal to the difference between the picture and sound RF carrier frequencies in a 6-MHz TV channel.
Last Answer : Intercarrier frequencY
Description : The upper pulse rate and information carrying capacity of a cable is limited by:
Last Answer : modal dispersion
Description : Picture frames are repeated at the rate of ___ per second
Last Answer : . 30
Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems.
Last Answer : Nyquist sampling theorem
Description : The result whenever the sampling rate is less than twice the highest audio frequency.
Last Answer : alias
Last Answer : 30
Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems
Description : It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme
Last Answer : Bandwidth efficiency, Information density, or Spectral efficiency
Description : For the 16-PSK and a transmission system with a 10kHz bandwidth, determine the maximum bit rate
Last Answer : 40,000 bps
Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred
Last Answer : baud rate
Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.
Last Answer : line speed
Description : It is the symmetrical expectation of the bit error rate in the system.
Last Answer : probability of errors
Description : In the ________ traffic model, the rate of the data flow changes in time, with the changes smooth instead of sudden and sharp.
Last Answer : variable bit rate
Description : The ________ is a function of three values: average data rate, peak data rate, and maximum burst size.
Last Answer : Effective bandwidth
Description : A sample of pure carbon dioxide, irrespective of its source contains 27.27% carbon and 72.73% oxygen. The data supports [AIIMS 1992] (A) Law of constant composition (B) Law of conservation of mass (C) Law of reciprocal proportions (D) Law of multiple proportions
Last Answer : (A) Law of constant composition
Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___
Last Answer : is horizontal
Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power
Last Answer : directive gain
Description : The property of interchangeability for the transmitting and receiving operations is known as ____
Last Answer : reciprocity
Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space
Last Answer : radiation field
Description : It is the ratio of the radiated to the reflected energy:
Last Answer : Radiation efficiency
Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates
Last Answer : . Radiation resistance
Description : Plots of field strength or power density with respect to the value at a reference point.
Last Answer : relative radiation pattern
Description : The radiation pattern plotted in terms of electric field strength or power density
Last Answer : absolute radiation pattern
Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____
Last Answer : line of shoot
Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated
Last Answer : waveguide
Description : If energy is applied at the geometrical center of antenna, the antenna is said to be ___
Last Answer : center-fed
Description : The radiation pattern of collinear and a broadside antenna is __
Last Answer : bidirectional
Description : Hertz antenna are predominantly used with frequencies above
Last Answer : 2MHz
Description : The point on the antenna where the transmission line is connected is called _____
Last Answer : feedpoint
Description : The discone antenna is
Last Answer : useful as a UHF receiving antenna
Description : It is the same with directive gain except that the total power fed to the antenna is used and the antenna efficiency is taken into account.
Last Answer : power gain
Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.
Last Answer : UDP
Description : ______ are special-interest groups that quickly test, evaluate, and standardize new technologies
Last Answer : Forums
Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.
Last Answer : Semantics
Description : ________ defines how a particular pattern to be interpreted, and what action is to be taken based on that interpretation.
Last Answer : syntax
Description : The effect of a large magnitude of the numerical aperture.
Last Answer : The amount of external light the fiber will accept is greater
Description : It is the figure of merit used to measure the magnitude of the acceptance angle.
Last Answer : numerical aperture
Description : It is a result of photons of light that are absorbed by the atoms of the glass core molecule
Last Answer : infrared absorption
Description : It is caused by valence electrons in the silica material from which the fiber are manufactured.
Last Answer : ultraviolet absorption
Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT
Last Answer : absorption loss
Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.
Last Answer : Acceptance cone half-angle
Description : Laser light is very bright because it is:
Last Answer : coherent
Description : The process of moving from one energy level to another is called __
Last Answer : Absorption
Description : The process of decaying from one energy level to another energy level is called _______
Last Answer : Spontaneous emission