In order to reduce the voltage surges due to current chopping and capacitive current breaking,

In order to reduce the voltage surges due to current chopping and capacitive current breaking, we connect

(A) A resistor across the CB contacts.

(B) A capacitor across the CB contacts.

(C) An inductor across the CB contacts.

(D) A switch across the CB contacts
by

1 Answer

Answer :

In order to reduce the voltage surges due to current chopping and capacitive current breaking, we connect A resistor across the CB contacts.

by

Related questions

For protection of rotating machines against lightning surges _______ is used.

Description : For protection of rotating machines against lightning surges _______ is used.  (1) lightning arrester (2) capacitor (3) combination of lightning arrester and capacitor (4) lightning conductor and arrester

Last Answer : For protection of rotating machines against lightning surges combination of lightning arrester and capacitor is used. 

Define the following terms related to circuit breaker. 1) Breaking Capacity 2) Making Capacity 3) Short time rating and 4) Normal current rating

Description : Define the following terms related to circuit breaker. 1) Breaking Capacity 2) Making Capacity 3) Short time rating and 4) Normal current rating

Last Answer : 1) Breaking Capacity: It is current (r.m.s) that a circuit breaker is capable of breaking at given recovery voltage under specified conditions (e.g. power factor, rate of rise of ... under specified conditions. The only limitation in this case is the temperature rise of current-carrying parts.

In dc choppers for chopping period T, the output voltage can be controlled by FM by varying

Description : In dc choppers for chopping period T, the output voltage can be controlled by FM by varying   (A) T keeping Ton constant (B) Ton keeping T constant (C) Toff keeping T constant (D) None of the above

Last Answer : In dc choppers for chopping period T, the output voltage can be controlled by FM by varying T keeping Ton constant

In order that current should flow without causing excessive heating or voltage drop, the relay contacts should?

Last Answer : In order that current should flow without causing excessive heating or voltage drop, the relay contacts should have low contact resistance, be clean and smooth, be of sufficient size and proper shape.

Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Description : Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Last Answer : Answer: B

Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Description : Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Last Answer : Answer: B

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is

Description : What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is approximately equal to the source voltage?

Last Answer : Capacitor always charges up to the voltage of source. When the capacitor is charged to same as source voltage then there is no current flowing through the capacitor. The current through the capacitor is called displacement current. 

What is meant by Current Chopping?

Description : What is meant by Current Chopping?

Last Answer : Current Chopping is a phenomenon of current interruption before the natural current zero is reached.

What do you mean by current chopping?

Description : What do you mean by current chopping?

Last Answer : When interrupting low inductive currents such as magnetizing currents of the transformer, shunt reactor, the rapid deionization of the contact space and blast effect may cause the current to be ... This phenomenon of interruption of the current before its natural zero is called current chopping.

what device can you use to make sure a computer is protected against power surges?

Description : what device can you use to make sure a computer is protected against power surges?

Last Answer : Ground your self with a rest band or standing ona floormate.

What does switching surges mean?

Description : What does switching surges mean? 

Last Answer : When a line is switched on high voltage will appear on the line due to its inductance and capacitance. This voltage is known as switching surges. 

What are the effects of excessive starts and repetitive surges?

Description : What are the effects of excessive starts and repetitive surges? 

Last Answer : Repetitive surges may give impact to the insulation of the motor and dielectric capability of the motor. Excessive starts may subject stator winding to high current for more time. Subsequently in HT motor due to High Mass rotor bar and rotor short ring may loose or fail. Bearing also may damage.  

How generator is protected from switching surges and lightning surges?

Description : How generator is protected from switching surges and lightning surges? 

Last Answer : Surge capacitor and lightning arrestor.  

Area of Indian coastline which is vulnerable to storm surges, cyclones and tsunamis is? a. 5700 Km b. 3700km c. 2700km d. 4700km

Description : Area of Indian coastline which is vulnerable to storm surges, cyclones and tsunamis is? a. 5700 Km b. 3700km c. 2700km d. 4700km

Last Answer : a. 5700 Km

Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Description : Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Last Answer : i)Protection of Electric Locomotive From Direct Lightening Stroke:  1. The direct lightning strokes may strike on the overhead conductor on the roof of the locomotive. 2. To protect the ... reduce the steepness of the wave front and also help to absorb the energy in the resistance.

An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Description : An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Last Answer : Answer: A

Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Description : Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Last Answer : (a) compensate for line inductive reactance

The inrush current of a transformer at no load is maximum if the supply voltage is switched on

Description : The inrush current of a transformer at no load is maximum if the supply voltage is switched on  (1) at peak voltage value (2) at zero voltage value (3) at half voltage value (4) at 0.866 time voltage value

Last Answer : At 0.866 time voltage value

Define the followings. Insulation level, Rated short circuit breaking current, Making current, Short time rating, Impulse withstand voltage, Power frequency withstand voltage .

Description : Define the followings.   Insulation level, Rated short circuit breaking current, Making current, Short time rating, Impulse withstand voltage, Power frequency withstand voltage .

Last Answer : Insulation level - it is the combination of rated voltage, the corresponding impulse withstand voltage, which together characterize the insulation of the equipment as regards its ability to withstand ... wave of power frequency (50 Hz) which the insulation of equipment should withstand. 

Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Last Answer : D. loading coil

In order to get maximum power transfer from a capacitive source, the load must?

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

What is good software for chopping up mp3 files into separate files?

Description : What is good software for chopping up mp3 files into separate files?

Last Answer : Audacity.

What can you teach me about chopping wood and felling "trees"?

Description : What can you teach me about chopping wood and felling "trees"?

Last Answer : answer:Why an axe? When I have had to do this, I have used either this link or one of these link I personally find saws – in particular the first one – easier to control.

Why are the videos chopping up on my Chrome browser nowadays?

Description : Why are the videos chopping up on my Chrome browser nowadays?

Last Answer : answer:I have been having quite a few issues lately with Chrome, maybe it's because of the latest release. I used to use Chrome(on the mac) all the time. Now I find myself switching between Safari ... time videos and certain media get that sad puzzle face and Chrome is like OOPS! What can you do

How can you prevent crying while chopping an onion?

Description : How can you prevent crying while chopping an onion?

Last Answer : goggles cutting onions releases acidic fumes from the onion that mix with the fluid on your eye, causing irritation and increased tear production.

How do you prevent crying when chopping onions?

Description : How do you prevent crying when chopping onions?

Last Answer : I heard chewing gum helps, but I don’t know if that’s true. I never cut onions because I hate them. Yuck… [equal][

Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Description : Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Last Answer : b.slicing

rutagaga chopping

Description : rutagaga chopping

Last Answer : Oh they are so hard...........use a large chopping board on your table with a large very sharp knife...........first cut should be in half long ways........be carefull..................once they are in half cut them into chunks. These are one of my favorites veggies.

How long to cut logs for chopping?

Description : I have a pretty good ax and I need to cut trees (diameter around 30 cm) for how long should I have them cut?

Last Answer : taxnad depending on whether he will drown with them in the fireplace or in the stove the width of the door with an ax can be split comfortably 50 cm, but the door will be 30 - 40

Are games chopping on the Playstation like on a PC?

Description : When I have a weak computer, my game crashes. But they all have the same playstation. Does that mean they don't have games on the playstation? Or does it matter again? I'm thinking of buying a playstation.

Last Answer : It doesn't have to be like that..you have a shunt PC .... buy a better computer, there are a lot of games on the PC and in better quality

What kitchen chopping board?

Description : What are your cutting boards in the kitchen? Wooden or plastic? What should I buy. For meat, vegetables.

Last Answer : I have plastic, wooden and bamboo boards. Wooden for meat, plastic for vegetables and bamboo for everything. I like to knock meat on a wooden one. The plastic boards are good, they wash well, but they are soon ... , so if I throw it away after half a year, I'm not sorry. I like bamboo the most.

What are some ways to prevent myself from crying while chopping onions?

Description : What are some ways to prevent myself from crying while chopping onions?

Last Answer : Why do onions make us cry?Cut into an onion, and you'll likely shed a few tears. That's due to a chemical reaction that acts as a sort of defense mechanism for the onion†but with the ... so you may find yourself crying for quite a while.By understanding that chemical reaction, we can prevent it.

The Lorax tried talking the once-ler out of chopping down the truffle trees until some event occurred what happened that convinced the once-ler he was right?

Description : The Lorax tried talking the once-ler out of chopping down the truffle trees until some event occurred what happened that convinced the once-ler he was right?

Last Answer : He sold a thneed, which he made from the trees.

Does chopping directly over granite countertop will harm it?

Description : Does chopping directly over granite countertop will harm it?

Last Answer : Granite is one of the toughest stones in the world and will not be affected by knives. After cutting directly on my granite countertop, I have experienced that my knives get dull after a few uses ... kitchen countertop was installed around 4 years ago and still, it looks like a new one. Cheers!!

This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above

Description : This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above

Last Answer : Ans-    a. Syndicator

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

The ratio of the effective value of the counter EMF in volts, to the effective value of the current in amperes is called _____________. A. impedance factor B. capacitive reactance C. inductive reactance D. root mean square

Description : The ratio of the effective value of the counter EMF in volts, to the effective value of the current in amperes is called _____________. A. impedance factor B. capacitive reactance C. inductive reactance D. root mean square

Last Answer : Answer: C

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Capacitive current formula

Description : Capacitive current

Last Answer : Capacitive current formula

In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will?

Description : In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will?

Last Answer : In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will be reduced by half.

Thermal overload relays are used to protect the motor against over current due to?

Last Answer : Thermal overload relays are used to protect the motor against overcurrent due to heavy loads.

Define: i) Arc voltage, ii) Recovery voltage, iii) Restriking voltage, iv) RRRV

Description : Define: i) Arc voltage, ii) Recovery voltage, iii) Restriking voltage, iv) RRRV

Last Answer : i) Arc Voltage: The voltage existing between the circuit breaker contacts during arcing is called as the arc voltage. It is low value compared to the system rated voltage. Normally it is around 3% ... steepest tangent to the restriking voltage curve. It is expressed in volts per micro-second.

The voltage of transmission can be regulated by

Description : The voltage of transmission can be regulated by  (A) Use of tap changing transformers (B) Switching in shunt capacitors at the receiving end during heavy loads (C) Use of capacitors to neutralize the effect of series reactance (D) Any of the above methods

Last Answer : The voltage of transmission can be regulated by  (A) Use of tap changing transformers (B) Switching in shunt capacitors at the receiving end during heavy loads (C) Use of capacitors to neutralize the effect of series reactance (D) Any of the above methods

For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Description : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Last Answer : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is 25 x 25

Over voltage protection is recommended for?

Last Answer : Over voltage protection is recommended for hydro-electric generators, steam turbine generators, gas turbine generators.

The under voltage relay can be used for?

Last Answer : The under voltage relay can be used for generators, busbars, transformers, motors.

The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to?

Last Answer : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to extinguish the arc.