The river which carries maximum quantity of water into the sea is the

The river which carries maximum quantity of water into the sea is the
by

1 Answer

Answer :

Mississippi
by

Related questions

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

What river carries medium objects?

Description : What river carries medium objects?

Last Answer : Mature rivers .

What river carries 5 times more slit that the Nile?

Description : What river carries 5 times more slit that the Nile?

Last Answer : What is the answer ?

What river carries about 5 times more silt than the Nile?

Description : What river carries about 5 times more silt than the Nile?

Last Answer : The Euphrates River carries about 5 times more silt than theNile.

Which among the following means of transport in India carries maximum number of passengers during a year? (1) International water transport (2) Indian Railways (3) Ashok Leyland buses (4) Telco buses

Description : Which among the following means of transport in India carries maximum number of passengers during a year? (1) International water transport (2) Indian Railways (3) Ashok Leyland buses (4) Telco buses

Last Answer : (2) Indian Railways Explanation: Indian Railways (reporting mark IR) is an Indian state-owned enterprise, owned and operated by the government of India through the Ministry of Railways. It is one of the world's largest ... ,000 mi) of track over a route of 65,000 km (40,000 mi) and 7,500 stations.

Which radiation carries maximum energy?

Description : Which radiation carries maximum energy?

Last Answer : – Gamma-rays

Which radiation carries maximum energy?

Description : Which radiation carries maximum energy?

Last Answer : Gamma-rays

A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending strain energy stored in the bar, is (A) 411 N mm (B) 511 N mm (C) 611 N mm (D) 711 N mm

Description : A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a  load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending  strain energy stored in the ... (A) 411 N mm  (B) 511 N mm  (C) 611 N mm  (D) 711 N mm 

Last Answer : (C) 611 N mm 

A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which  causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the  joist will be,  (A) 10 m  (B) 12 m  (C) 14 m  (D) 16 m 

Last Answer : (D) 16 m 

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2 , the depth of the joist, is (A) 200 mm (B) 250 mm (C) 300 mm (D) 400 mm

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is (A) 0.207 (B) 0.307 (C) 0.407 (D) 0.508

Description : A simply supported beam which carries a uniformly distributed load has two equal overhangs. To  have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang  to the total length of the beam, is  (A) 0.207  (B) 0.307  (C) 0.407  (D) 0.508 

Last Answer : (A) 0.207 

A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Description : A simply supported uniform rectangular bar breadth b, depth d and length L carries an isolated  load W at its mid-span. The same bar experiences an extension e under same tensile load. The  ratio of the maximum deflection to the ... (A) L/d (B) L/2d (C) (L/2d)² (D) (L/3d)²

Last Answer : (C) (L/2d)

A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be (A) 2/3 (B) 3/2 (C) 5/8 (D) 8/5

Description : A simply supported beam A carries a point load at its mid span. Another identical beam B carries  the same load but uniformly distributed over the entire span. The ratio of the maximum  deflections of the beams A and B, will be  (A) 2/3  (B) 3/2  (C) 5/8  (D) 8/5 

Last Answer : (D) 8/5 

A simply supported beam carries two equal concentrated loads W at distances L/3 from either support. The maximum bending moment (A) WL/3 (B) WL/4 (C) 5WL/4 (D) 3WL/12

Description : A simply supported beam carries two equal concentrated loads W at distances L/3 from either support. The maximum bending moment (A) WL/3 (B) WL/4 (C) 5WL/4 (D) 3WL/12

Last Answer : (A) WL/3

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

A simply supported beam of span carries a uniformly distributed load . The maximum bending moment is (A) WL/2 (B) WL/4 (C) WL/8 (D) WL/12

Description : A simply supported beam of span carries a uniformly distributed load . The maximum bending moment is (A) WL/2 (B) WL/4 (C) WL/8 (D) WL/12

Last Answer : (C) WL/8

A simply supported beam of span L carries a concentrated load W at its mid-span. The maximum bending moment M is (A) WL/2 (B) WL/4 (C) WL/8 (D) WL/12

Description : A simply supported beam of span L carries a concentrated load W at its mid-span. The maximum  bending moment M is  (A) WL/2  (B) WL/4  (C) WL/8  (D) WL/12

Last Answer : (B) WL/4

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

Pick up the correct statement from the following: (A) Failure plane carries maximum shear stress (B) Failure plane does not carry maximum shear stress (C) Failure plane carries shear stress equal to maximum shear stress (D) None of these

Description : Pick up the correct statement from the following: (A) Failure plane carries maximum shear stress (B) Failure plane does not carry maximum shear stress (C) Failure plane carries shear stress equal to maximum shear stress (D) None of these

Last Answer : Option B

Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Description : Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Last Answer : Answer: Option B

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option C

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm

Description : A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm

Last Answer : a. 5.4 mm

A cantilever beam of span 3m carries a point load 100 N at the free end. The maximum B.M in the beam will be (a) 100 N-m (b) 300 N-m (c) 150 N-m (d) 600 N-m

Description : A cantilever beam of span 3m carries a point load 100 N at the free end. The maximum B.M in the beam will be (a) 100 N-m (b) 300 N-m (c) 150 N-m (d) 600 N-m

Last Answer : (b) 300 N-m

A cantilever beam of length of 2m carries a U.D.L. of 150 N/m over its whole span. The maximum shear force in the beam will be (a) 150 N (b) 300 N (c) 150 N-m (d) 600 N-m

Description : A cantilever beam of length of 2m carries a U.D.L. of 150 N/m over its whole span. The maximum shear force in the beam will be (a) 150 N (b) 300 N (c) 150 N-m (d) 600 N-m

Last Answer : (b) 300 N

A T-section beam having flange 180mm wide and 20 mm thick and web 150 mm long and 20 mm thick carries a udl of 80 kN/m over an effective span of 8 m. Calculate the maximum bending stress.

Description : A T-section beam having flange 180mm wide and 20 mm thick and web 150 mm long and 20 mm thick carries a udl of 80 kN/m over an effective span of 8 m. Calculate the maximum bending stress.

Last Answer : Solution :

A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Description : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Last Answer : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen ... . ii and iii only D. iii and iv only

A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Description : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Last Answer : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after ... iv C. ii and iii D. iii and iv

What sea does the river Dee flow into?

Description : What sea does the river Dee flow into?

Last Answer : Irish sea

What is the large river that flows into the sea at 31 n?

Description : What is the large river that flows into the sea at 31 n?

Last Answer : What is the answer ?

The River Danube flows into which sea?

Description : The River Danube flows into which sea?

Last Answer : The Black Sea

Indus River falls into the Arabian Sea near: A. Karachi B. Badin C. Mithankot D. Thatta

Description : Indus River falls into the Arabian Sea near: A. Karachi B. Badin C. Mithankot D. Thatta

Last Answer : ANSWER: D

Hydrology helps in (A) Predicting maximum flows (B) Deciding the minimum reservoir capacity (C) Forecasting the availability of quantity of water at reservoir site (D) All the above

Description : Hydrology helps in (A) Predicting maximum flows (B) Deciding the minimum reservoir capacity (C) Forecasting the availability of quantity of water at reservoir site (D) All the above

Last Answer : Answer: Option D

Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Description : Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Last Answer : Answer: Option C

Field capacity represents the maximum quantity of water held: w) in the soil against the force of gravity x) in the ground water zone y) in the intermediate zone z) below the water table

Description : Field capacity represents the maximum quantity of water held: w) in the soil against the force of gravity x) in the ground water zone y) in the intermediate zone z) below the water table

Last Answer : ANSWER: W -- IN THE SOIL AGAINST THE FORCE OF GRAVITY

Why is it easier to swim in sea water than in river water ?

Description : Why is it easier to swim in sea water than in river water ?

Last Answer : It is easier to swim in seawater as there is more buoyancy in sea water than river water. The buoyancy depends on the density of the flow (proportional). Sea water density is slightly higher than river water ... the river water. For this reason, it is easier to swim in sea water than in river water.

What is meant by Isthmus? (1) Mouth of a river where it joins the sea (2) Narrow strip of water dividing two land masses (3) Narrow strip of land dividing two oceans (4) Narrow strip of land connecting two large areas of land

Description : What is meant by Isthmus? (1) Mouth of a river where it joins the sea (2) Narrow strip of water dividing two land masses (3) Narrow strip of land dividing two oceans (4) Narrow strip of land connecting two large areas of land

Last Answer : (3) Narrow strip of land dividing two oceans Explanation: An isthmus is a narrow strip of land connecting two larger land areas, usually with water on either side, The Panama Canal crosses the ... western side of an isthmus formed by the Sinai Peninsula. Strait is the sea counterpart of isthmus.

Iron rusts quickly in – (1) Rain water (2) Sea water (3) Distilled water (4) River water

Description : Iron rusts quickly in – (1) Rain water (2) Sea water (3) Distilled water (4) River water

Last Answer : (2) Sea water Explanation: Water is the enabler of fast oxidation of iron. So freshwater will also cause rust. However, salt water (sea water) is a very good conductor (lots of dissociated ions ... which causes the current to be re-versed and in effect the zinc corrodes rapidly, protecting the iron.

The purest form of water in nature is – (1) Rain water (2) Lake water (3) River water (4) Sea water

Description : The purest form of water in nature is – (1) Rain water (2) Lake water (3) River water (4) Sea water

Last Answer : (1) Rain water Explanation: Rainwater is often considered the purest form of water available on the Earth. The evaporation of water by the sun allows the salts and other impurities to be left behind out ... when it reaches the surface of the Earth due to the high pollution of air with toxic gases.

It is easier for a man to swim in sea water, than in river water because – (1) the density of sea water is lesser than the density of river water (2) the density of sea water is more than the density of river water (3) the sea is deeper than the river (4) the sea is wider than the river

Description : It is easier for a man to swim in sea water, than in river water because – (1) the density of sea water is lesser than the density of river water (2) the density of sea water is more than the density of river water (3) the sea is deeper than the river (4) the sea is wider than the river

Last Answer : (2) the density of sea water is more than the density of river water Explanation: the density of sea water is more than the density of river water

As compared to fresh river water, sea water contains oxygen A. 10% less B. 20% less C. 10% more D. 20% more

Description : As compared to fresh river water, sea water contains oxygen A. 10% less B. 20% less C. 10% more D. 20% more

Last Answer : ANS: B

It is easier to swim in sea water than in river water. Explain.

Description : It is easier to swim in sea water than in river water. Explain.

Last Answer : Ans: The density of sea water is more than that of the river water. Therefore, the weight of sea water displaced by the swimmer is more. Thus, buoyant force of upthrust on the swimmer increases, making it easier to swim in sea water.

In a very low temperature which from the following will freeze at last? A. River water B. Canal water C. Sea water (Answer) D. Water in a lake

Description : In a very low temperature which from the following will freeze at last? A. River water B. Canal water C. Sea water (Answer) D. Water in a lake

Last Answer : C. Sea water (Answer)

Hydrology is the science which deals with (A) Rain water (B) River water (C) Sea water (D) Surface and underground water

Description : Hydrology is the science which deals with (A) Rain water (B) River water (C) Sea water (D) Surface and underground water

Last Answer : Answer: Option D

a ship comes to sea water from river water, then its bottom will?

Description : a ship comes to sea water from river water, then its bottom will?

Last Answer : rise due to buoyancy

The purest form of water in nature is (1) Rain water (2) Lake water (3) River water (4) Sea water

Description : The purest form of water in nature is (1) Rain water (2) Lake water (3) River water (4) Sea water 

Last Answer : Rain water

Iron rusts quickly in (1) Rain water (2) Sea water (3) Distilled water (4) River water

Description : Iron rusts quickly in (1) Rain water (2) Sea water (3) Distilled water (4) River water

Last Answer : Sea water

It is easier for a man to swim in sea water, than in river water because (1) the density of sea water is lesser than the density of river water (2) the density of sea water is more than the density of river water (3) the sea is-deeper than the river (4) the sea is wider than the river

Description : It is easier for a man to swim in sea water, than in river water because (1) the density of sea water is lesser than the density of river water (2) the density of sea water is more than the density of river water (3) the sea is-deeper than the river (4) the sea is wider than the river

Last Answer :  the density of sea water is more than the density of river water

What is meant by Isthmus? (1) Mouth of a river where it joins the sea (2) Narrow strip of water dividing two land masses (3) Narrow strip of land dividing two oceans (4) Narrow strip of land connecting two large areas of land

Description : What is meant by Isthmus? (1) Mouth of a river where it joins the sea (2) Narrow strip of water dividing two land masses (3) Narrow strip of land dividing two oceans (4) Narrow strip of land connecting two large areas of land

Last Answer : Narrow strip of land dividing two oceans