The ___ provides the visual display showing the form of the signal applied as a waveform on the front screen of a cathode ray oscilloscope

The ___ provides the visual display showing the form of the signal applied as a waveform
on the front screen of a cathode ray oscilloscope
by

1 Answer

Answer :

CRT
by

Related questions

What provides a visual representation of any waveform applied to the input terminals?

Description : What provides a visual representation of any waveform applied to the input terminals?

Last Answer : cathode ray oscilloscope (CRO)

The waveform of a certain signal can be studied by – (1) Spectrometer (2) Cathode ray oscilloscope (3) p - n junction diode (4) Sonometer

Description : The waveform of a certain signal can be studied by – (1) Spectrometer (2) Cathode ray oscilloscope (3) p - n junction diode (4) Sonometer

Last Answer : (4) Sonometer Explanation: A spectrometer is an instrument used to measure properties of light over a specific portion of the electromagnetic spectrum. Cathode ray oscilloscope is an electronic display ... electron beam that is used to produce visible patterns or graphs on a phosphorescent screen.

The waveform of a certain signal can be studied by (1) Spectrometer (2) Cathode ray oscilloscope (3) p – n junction diode (4) Sonometer

Description : The waveform of a certain signal can be studied by (1) Spectrometer (2) Cathode ray oscilloscope (3) p – n junction diode (4) Sonometer

Last Answer : Sonometer

Considered as the "heart" of the cathode ray oscilloscope.

Description : Considered as the "heart" of the cathode ray oscilloscope.

Last Answer : cathode ray tube (CRT)

The time interval that a waveform is high (or low) is the ___ of the signal.

Description : The time interval that a waveform is high (or low) is the ___ of the signal.

Last Answer : pulse width

In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Description : In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Last Answer : intensity control

An oscilloscope provides easy measurement of __ values.

Description : An oscilloscope provides easy measurement of __ values.

Last Answer : peak to peak

What kind of voltage is applied to the horizontal deflection plates of the oscilloscope?

Description : What kind of voltage is applied to the horizontal deflection plates of the oscilloscope?

Last Answer : sweep voltage

The time base signal in Cathode Ray Oscilloscope (CRO) is

Description : The time base signal in Cathode Ray Oscilloscope (CRO) is  (1) A square wave signal (2) A sawtooth signal (3) A triangular wave signal (4) A sinusoidal signal

Last Answer : 2 Saw tooth 

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

In VTVMS, ___ refers to the smallest signal that can be reliably measured

Description : In VTVMS, ___ refers to the smallest signal that can be reliably measured

Last Answer : sensitivity

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

What is an electronic instrument capable of showing on screen and maybe on print, relative spacing of transmitter carriers, their sidebands and harmonics?

Description : What is an electronic instrument capable of showing on screen and maybe on print, relative spacing of transmitter carriers, their sidebands and harmonics?

Last Answer : Spectrum Analyzer

What do you call an oscilloscope that uses sampling techniques in processing signals having frequencies beyond its normal capabilities?

Description : What do you call an oscilloscope that uses sampling techniques in processing signals having frequencies beyond its normal capabilities?

Last Answer : sampling oscilloscope

What is being controlled at the potentials between anode of an oscilloscope?

Description : What is being controlled at the potentials between anode of an oscilloscope?

Last Answer : Focus

Generally, oscilloscope uses what type of deflection?

Description : Generally, oscilloscope uses what type of deflection?

Last Answer : electrostatic deflection

Type of waveform generated by the sweep generator of the CRT

Description : Type of waveform generated by the sweep generator of the CRT

Last Answer : sawtooth

___ has a series RC combination in one arm and a parallel RC combination in the adjoining arm and used as a notch filter in harmonic distortion analyzer.

Description : ___ has a series RC combination in one arm and a parallel RC combination in the adjoining arm and used as a notch filter in harmonic distortion analyzer.

Last Answer : wein bridge

When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Description : When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Last Answer : Wein Inductance Bridge

Induction type instruments are mostly used as ___

Description : Induction type instruments are mostly used as ___

Last Answer : watt-hour meter

For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Description : For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Last Answer : vertical

When the meter is unsufficiently damped, it is considered as ___

Description : When the meter is unsufficiently damped, it is considered as ___

Last Answer : underdamped

___ ammeter is used to measure high-frequency currents.

Description : ___ ammeter is used to measure high-frequency currents.

Last Answer : thermocouple

A wheatstone bridge is balanced if ___

Description : A wheatstone bridge is balanced if ___

Last Answer : the ratio of resistors on one side of the bridge equals the ratio of resistors on the other side

In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Description : In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Last Answer : swamping resistors

The time interval between pulses is called ___

Description : The time interval between pulses is called ___

Last Answer : pulse delay

A measure of consistency or repeatability of measurements is called. ___

Description : A measure of consistency or repeatability of measurements is called. ___

Last Answer : precision

___ is used for measuring medium Q coils

Description : ___ is used for measuring medium Q coils

Last Answer : Maxwell Bridge

Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Description : Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Last Answer : low resistance resistor

Error in voltmeter is due to ___

Description : Error in voltmeter is due to ___

Last Answer : loading

For time measurements, ___ scale of the scope is used.

Description : For time measurements, ___ scale of the scope is used.

Last Answer : horizontal

For a dynamometer to be able to measure high current, a ___ should be used.

Description : For a dynamometer to be able to measure high current, a ___ should be used.

Last Answer : current transformer

___ meter is the most sensitive

Description : ___ meter is the most sensitive

Last Answer : 1uA

An electronic measuring device that provide instantaneous visual indication of voltage excursions

Description : An electronic measuring device that provide instantaneous visual indication of voltage excursions

Last Answer : oscilloscope

In a free running oscilloscope the horizontal deflection system is driven by a ........waveform

Last Answer :  In a free running oscilloscope, the horizontal deflection system is driven by a Ramp waveform

Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Description : Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Last Answer : storage oscilloscope

On oscilloscope screen for dynamic measurement, lissajous diagram is normally used to determine the __________ of the input signal. (A) Frequency (B) Amplitude (C) Damping (D) None of these

Description : On oscilloscope screen for dynamic measurement, lissajous diagram is normally used to determine the __________ of the input signal. (A) Frequency (B) Amplitude (C) Damping (D) None of these

Last Answer : (A) Frequency

In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each other and the intensity of the

Description : In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each other and the intensity of the

Last Answer : In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each ... 01 T` and `E=50,000 V//m`.

What sensor provides a change of resistance with typical power range of 1uW to 10mW and with maximum frequency greater than 100GHz

Description : What sensor provides a change of resistance with typical power range of 1uW to 10mW and with maximum frequency greater than 100GHz

Last Answer : thermistor sensor

A sensing element that provides a dc voltage less than 10mV with typical power range of 0.1 to 100mW

Description : A sensing element that provides a dc voltage less than 10mV with typical power range of 0.1 to 100mW

Last Answer : thermal converters

What sensor provides a dc voltage approximately 1V at 10mW?

Description : What sensor provides a dc voltage approximately 1V at 10mW?

Last Answer : diode sensor

What CRT element provides for controls of the number of electrons passing father into the tube?

Description : What CRT element provides for controls of the number of electrons passing father into the tube?

Last Answer : control grid

How is D.P. transmitter applied to a close tank ?

Description : How is D.P. transmitter applied to a close tank ?

Last Answer : In close tank the bottom of the tank is connected to the high pressure side of the transmitter and top of the tank in connected to L.P. side of the transmitter. In this way the vessel pressure is balanced.

An electrostatic voltmeter in which an assembly of figure-8-shaped metal plates rotates between the plates of a stationary assembly when a voltage is applied betweeen the assemblies.

Description : An electrostatic voltmeter in which an assembly of figure-8-shaped metal plates rotates between the plates of a stationary assembly when a voltage is applied betweeen the assemblies.

Last Answer : Kelvin voltmeter

Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Description : Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Last Answer : sinusoidal

The period of a repetitive signal is

Description : The period of a repetitive signal is

Last Answer : 1 cycle of the waveform

When the vertical input is 0V, the electron beam may be position at the __ of the screen.

Description : When the vertical input is 0V, the electron beam may be position at the __ of the screen.

Last Answer : vertical center

In a dual trace oscilloscope, the display appears segmented when

Description : In a dual trace oscilloscope, the display appears segmented when  (a) low frequency signals are observed in Alternate mode (b) low frequency signals are observed in Chop mode (c) high frequency signals are observed in Alternate mode (d) high frequency signals are observed in Chop mode

Last Answer : In a dual trace oscilloscope, the display appears segmented when high frequency signals are observed in Chop mode

The front panel display provides lights as green LED represent sand red LED represent _ for device programmer who writes input/output basic: a. Busy and Error b. Error and Busy c. Busy and Busy d. Error and Error

Description : The front panel display provides lights as green LED represent sand red LED represent _ for device programmer who writes input/output basic: a. Busy and Error b. Error and Busy c. Busy and Busy d. Error and Error

Last Answer : a. Busy and Error