In 1969, what did several scientists conclude about optical fiber loss?

In 1969, what did several scientists conclude about optical  fiber loss?
by

1 Answer

Answer :

mpurities in the fiber material caused the signal loss in optical  fibers. The basic fiber material did not prevent the light signal from  reaching the end of the fiber.
by

Related questions

Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Description : Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Last Answer : To increase performance and reduce cost

Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Description : Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Last Answer : Single mode fiber.

What can the scientists conclude from this finding?

Description : What can the scientists conclude from this finding?

Last Answer : Fossils in layer 5 are less than 540 million years old.

Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Description : Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?

Last Answer : T-coupler

Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Description : Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Last Answer : Butt-jointed connectors.

What is the basic fiber cleaving technique for preparing optical fibers for coupling?

Description : What is the basic fiber cleaving technique for preparing optical fibers for coupling?

Last Answer : Score-and-break.

Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Description : Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Last Answer : Be flat, smooth, and perpendicular to the fiber axis.

Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Description : Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Last Answer : SLEDs and ELEDs.

The amount of optical power coupled into an optical fiber depends on what four factors?

Description : The amount of optical power coupled into an optical fiber depends on what four factors?

Last Answer : (1) The angles over which the light is emitted. (2) The size of the source's light-emitting area relative to the fiber core size. (3) The alignment of the source and fiber. (4) The coupling characteristics of the fiber (such as the NA and the refractive index profile)

Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Description : Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Last Answer : The optical source.

Describe an optical fiber cable component (OFCC).

Description : Describe an optical fiber cable component (OFCC).

Last Answer : OFCCs are tight-buffer fiber surrounded by arimid yarn and a low-halogen outer jacket.

Multimode optical fibers can have a step-index or graded index refractive index profile. Which fiber, multimode step-index or multimode graded-index fiber, usually performs better?

Description : Multimode optical fibers can have a step-index or graded index refractive index profile. Which fiber, multimode step-index or multimode graded-index fiber, usually performs better?

Last Answer : Multimode graded-index fiber

List the two principal optical detectors used in fiber optic systems.

Description : List the two principal optical detectors used in fiber optic systems.

Last Answer : The semiconductor positive-intrinsic-negative (PIN) photodiode and avalanche photodiode (APD).

If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Description : If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Last Answer : With an OTDR unless it is less than 50 meters in length. If it is less than 50 meters in length, continuity should be verified with a flashlight.

When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.

Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Description : Delay differences between the source wavelengths occur as the optical signal propagates along the fiber. What is this called?

Last Answer : Differential group delay t(l).

A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Description : A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Last Answer : Second-order mode.

optical launch conditions exists if the launch spot size and angular distribution are larger than that of the fiber core?

Description : optical launch conditions exists if the launch spot size and angular distribution are larger than that of the fiber core?

Last Answer : Overfilled.

Does underfilling a multimode optical fiber excite mainly high-order or low-order modes?

Description : Does underfilling a multimode optical fiber excite mainly high-order or low-order modes?

Last Answer : Low-order modes.

What are the main causes of absorption in optical fiber?

Description : What are the main causes of absorption in optical fiber?

Last Answer : Intrinsic and extrinsic material properties.

What type of optical fiber operates below the cutoff

Description : What type of optical fiber operates below the cutoff

Last Answer : The order of a mode is indicated by the number of field maxima within the core of the fiber. The order of a mode is also determined by the angle that the wavefront makes with the axis of the fiber

A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Description : A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Last Answer : Smaller.

List the three parts of an optical fiber.

Description : List the three parts of an optical fiber.

Last Answer : Core, cladding, and coating or buffer.

The index of refraction measures the speed of light in an optical fiber. Will light travel faster in an optically dense material or in one that is less dense?

Description : The index of refraction measures the speed of light in an optical fiber. Will light travel faster in an optically dense material or in one that is less dense?

Last Answer : Light will travel faster in an optical material that is less dense.

What is the basic optical-material property relevant to optical fiber light transmission?

Description : What is the basic optical-material property relevant to optical fiber light transmission?

Last Answer : The index of refraction.

Two methods describe how light propagates along an optical fiber. These methods define two theories of light propagation. What do we call these two theories?

Description : Two methods describe how light propagates along an optical fiber. These methods define two theories of light propagation. What do we call these two theories?

Last Answer : The ray theory and the mode theory.

Low-order and high-order modes propagate along an optical fiber. How are modes determined to be low-order or high order modes?

Description : Low-order and high-order modes propagate along an optical fiber. How are modes determined to be low-order or high order modes?

Last Answer : Depends on the bending caused by the velocity difference of the wave traveling through different mediums

What mechanisms in the fiber waveguides weaken and distort the optical signal?

Description : What mechanisms in the fiber waveguides weaken and distort the optical signal?

Last Answer : Scattering, absorption, and dispersion.

What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Description : What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Last Answer : D. 0.38 db

Which is not a possible cause of optical fiber loss? ∙ a. Impurities ∙ b. Glass attenuation ∙ c. Stepped index operation ∙ d. Microbending

Description : Which is not a possible cause of optical fiber loss? ∙ a. Impurities ∙ b. Glass attenuation ∙ c. Stepped index operation ∙ d. Microbending

Last Answer : ∙ c. Stepped index operation

Explain absorption loss and scattering loss occurs in optical fiber.

Description : Explain absorption loss and scattering loss occurs in optical fiber.

Last Answer : Scattering loss:- Basically, scattering losses are caused by the interaction of light with density fluctuations within a fiber. Density changes are produced when optical fibers are manufactured.  ... glass material. iii. Intrinsic absorption by the basic constituent atoms of the fiber material.

As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by

Description : As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by  a. Using index matching fluid in the gap b. Making V-grooved splicing c. Both (a)and (b) d. Making carefully polishing

Last Answer : As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by Using index matching fluid in the gap

Define the loss in optical power through a connection.

Description : Define the loss in optical power through a connection.

Last Answer : loss = 10log

List the types of materials used in fabricating low-loss, long wavelength optical fibers.

Description : List the types of materials used in fabricating low-loss, long wavelength optical fibers.

Last Answer : Heavy-metal fluorides, chalcogenide glasses, and crystalline materials.

How can loss be reduced during construction (or fabrication) of optical fibers?

Description : How can loss be reduced during construction (or fabrication) of optical fibers?

Last Answer : By removing the impurities from optical fiber.

Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Description : Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Last Answer : Butt-jointed connectors.

Does coupling loss from refractive index profile difference result when the receiving fiber has a larger profile parameter

Description : Does coupling loss from refractive index profile difference result when the receiving fiber has a larger profile parameter

Last Answer : Fiber alignment.

How does index matching gel affect the amount of coupling loss caused by (a) fiber separation, (b) lateral misalignment, and (c) angular misalignment?

Description : How does index matching gel affect the amount of coupling loss caused by (a) fiber separation, (b) lateral misalignment, and (c) angular misalignment?

Last Answer : (a) Reduces coupling loss, (b) does not change coupling loss, and (c) increases coupling loss

What connection properties result in fiber optic connector coupling loss?

Description : What connection properties result in fiber optic connector coupling loss?

Last Answer : Poor fiber alignment and end preparation, fiber mismatches, and Fresnel reflection.

What fiber property directly affects splice loss in fusion splicing?

Description : What fiber property directly affects splice loss in fusion splicing?

Last Answer : The angles and quality of the two fiber-end faces.

Fiber-to-fiber coupling loss is affected by intrinsic and extrinsic coupling losses. Can intrinsic coupling losses be limited by limiting fiber mismatches?

Description : Fiber-to-fiber coupling loss is affected by intrinsic and extrinsic coupling losses. Can intrinsic coupling losses be limited by limiting fiber mismatches?

Last Answer : Yes.

While coupled power and bending loss favor a high D, which Dvalue, smaller or larger, improves fiber bandwidth?

Description : While coupled power and bending loss favor a high D, which Dvalue, smaller or larger, improves fiber bandwidth?

Last Answer : Smaller.

Will fiber coupling loss generally increase or decrease if the mode field diameter of a single mode fiber is decreased?

Description : Will fiber coupling loss generally increase or decrease if the mode field diameter of a single mode fiber is decreased?

Last Answer : Increase.

Microbend loss is caused by microscopic bends of the fiber axis. List three sources of microbend loss.

Description : Microbend loss is caused by microscopic bends of the fiber axis. List three sources of microbend loss.

Last Answer : Uneven coating applications, improper cabling procedures, and external force.

Do you think scientists will be able to predict an earthquake more precisely and give people several hours advance warning?

Description : Do you think scientists will be able to predict an earthquake more precisely and give people several hours advance warning?

Last Answer : I would hope so, but I'm not exactly counting on it. I'm no scientist so I'm not sure how close the scientific community is to a breakthrough in plate techtonics research, but I would think with ... the world, this kind of research might be cut back a little bit in favor of more pressing needs.

Why do scientists do each part of their investigation several times?

Description : Why do scientists do each part of their investigation several times?

Last Answer : Need answer

Identify the fastest wired media out of the following: Ethernet cable, Optical fiber, Co_axial cable -Technology

Description : Identify the fastest wired media out of the following: Ethernet cable, Optical fiber, Co_axial cable -Technology

Last Answer : Optical fiber

How to get data with optical fiber ?

Description : How to get data with optical fiber ?

Last Answer : Optical fiber (optical fiber ) is a type of thin , transparent fiber , usually made of glass or plastic , which is used to transmit light. Fiber optics is the branch of applied science and engineering that ... In this way our information goes to the recipient through the light fiber.

Optical fiber cable is more suitable in wired media- ?

Description : Optical fiber cable is more suitable in wired media- ?

Last Answer : Optical fiber cable is more suitable in wired media. Because optical fiber cable is a type of cable made of thousands of glass fibers through which data is transmitted at the speed of light. Laser beams are used to transfer data through this cable.

What is the use of optical fiber in health ?

Description : What is the use of optical fiber in health ?

Last Answer : To examine the inner wall of a patient's stomach, a light tube is inserted into the stomach through the mouth. One set of these light tubes illuminates the corresponding part of the stomach wall by sending ... of the blood vessels or the valves of the heart can be seen by inserting the light tube.