As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by

As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by 

a. Using index matching fluid in the gap b. Making V-grooved splicing c. Both (a)and (b) d. Making carefully polishing
by

1 Answer

Answer :

As we know when there is a joint in optical fiber then there will be some loss then this loss be minimized by Using index matching fluid in the gap

by

Related questions

Unlike coax and twisted pair, optical fibers are immune to

Description : Unlike coax and twisted pair, optical fibers are immune to  a. High-frequency transmission b. Signal attenuation c. Power loss d. Electromagnetic interference

Last Answer : Unlike coax and twisted pair, optical fibers are immune to Electromagnetic interference

How can eddy current loss be minimized?

Description : How can eddy current loss be minimized?

Last Answer : By laminating the core.

Fertilizer and nutrient loss is minimized in this type of irrigation. (a) Bamboo irrigation (b) Furrow irrigation. (c) Spray irrigation. (d) None of the above.

Description : Fertilizer and nutrient loss is minimized in this type of irrigation. (a) Bamboo irrigation (b) Furrow irrigation. (c) Spray irrigation. (d) None of the above.

Last Answer : (a) Bamboo irrigation

In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a

Description : In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a

Last Answer : ans a

What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Description : What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Last Answer : D. 0.38 db

Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Description : Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Last Answer : To increase performance and reduce cost

Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Description : Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Last Answer : Single mode fiber.

In 1969, what did several scientists conclude about optical fiber loss?

Description : In 1969, what did several scientists conclude about optical fiber loss?

Last Answer : mpurities in the fiber material caused the signal loss in optical fibers. The basic fiber material did not prevent the light signal from reaching the end of the fiber.

Which is not a possible cause of optical fiber loss? ∙ a. Impurities ∙ b. Glass attenuation ∙ c. Stepped index operation ∙ d. Microbending

Description : Which is not a possible cause of optical fiber loss? ∙ a. Impurities ∙ b. Glass attenuation ∙ c. Stepped index operation ∙ d. Microbending

Last Answer : ∙ c. Stepped index operation

Explain absorption loss and scattering loss occurs in optical fiber.

Description : Explain absorption loss and scattering loss occurs in optical fiber.

Last Answer : Scattering loss:- Basically, scattering losses are caused by the interaction of light with density fluctuations within a fiber. Density changes are produced when optical fibers are manufactured.  ... glass material. iii. Intrinsic absorption by the basic constituent atoms of the fiber material.

What would you do if your SO did this then minimized the danger?

Description : What would you do if your SO did this then minimized the danger?

Last Answer : answer:No way I would get in the car and let my SO drive after what just happened. Do you believe he reported the incident to his doctor and if he really did, do you think he reported it as you ... of this in order not to scare your son but it comes down to not being safe and not being fair.

An evanescent mode occurs when:

Description : An evanescent mode occurs when:  a. A wave is attenuated rather than propagated. b. The propagation constant is purely imaginary. c. m = 0 = n so that all field components vanish. d. The wave frequency is the same as the cutoff frequency. 

Last Answer : An evanescent mode occurs when: A wave is attenuated rather than propagated.

A half wavelength Dipole antenna has _________ Radiation Pattern

Description : A half wavelength Dipole antenna has _________ Radiation Pattern  a. Hemispherical b. Omni-Directional c. Isotropic d. End fire

Last Answer : A half wavelength Dipole antenna has Omni-Directional Radiation Pattern 

An antenna located in a city is a source of radio waves. How much time does it take the wave to reach a town

Description : An antenna located in a city is a source of radio waves. How much time does it take the wave to reach a town 12,000 km away from the city?  a. 36 s b. 20 us c. 20 ms d. 40 ms 

Last Answer : An antenna located in a city is a source of radio waves. How much time does it take the wave to reach a town 12,000 km away from the city?  a. 36 s b. 20 us c. 20 ms d. 40 ms 

At Service provider end IMEI number of MS is basically stored in:

Description : At Service provider end IMEI number of MS is basically stored in:  a. HLR b. VLR c. AUC d. EIR

Last Answer : At Service provider end IMEI number of MS is basically stored in:  a. HLR b. VLR c. AUC d. EIR

Which cable connects the subscriber telephone to the nearest end office in the local loop

Description : Which cable connects the subscriber telephone to the nearest end office in the local loop.  a. Coaxial b. Fiber-optic c. Twisted-pair d. Both (b) and (c)

Last Answer : Which cable connects the subscriber telephone to the nearest end office in the local loop.  a. Coaxial b. Fiber-optic c. Twisted-pair d. Both (b) and (c)

Regenerative repeaters are placed along the communication path to control:

Description : Regenerative repeaters are placed along the communication path to control:  a. Power b. Noise c. Frequency d. Amplitude 

Last Answer : Regenerative repeaters are placed along the communication path to control: Noise 

The Fourier transform of a gate pulse is:

Description : The Fourier transform of a gate pulse is:  a. Sinc function b. Triangular function c. Gate function d. Unit step unction

Last Answer : The Fourier transform of a gate pulse is: Sinc function

Which of these materials requires the least value of magnetic field strength to magnetize it?

Description : Which of these materials requires the least value of magnetic field strength to magnetize it?  a. Nickel b. Silver c. Tungsten d. Sodium chloride 

Last Answer : Which of these materials requires the least value of magnetic field strength to magnetize it?  a. Nickel b. Silver c. Tungsten d. Sodium chloride 

Where the poles should be placed on the unit circle for stable filter?

Description : Where the poles should be placed on the unit circle for stable filter?  a. Outside b. Inside c. both a & b d. none of the above

Last Answer : Where the poles should be placed on the unit circle for stable filter?  a. Outside b. Inside c. both a & b d. none of the above

Radio frequency ranges from 30MHz to 1GHz and it is suitable for:

Description : Radio frequency ranges from 30MHz to 1GHz and it is suitable for:  a. Point to point transmission b. Omni directional transmission c. Local point to point transmission d. None of the above

Last Answer : Radio frequency ranges from 30MHz to 1GHz and it is suitable for: Local point to point transmission

What type of communication use Radio waves:

Description : What type of communication use Radio waves:  a. Unicast b. Both (a) and (c) can be used c. Multicast d. None of the above 

Last Answer : What type of communication use Radio waves: Multicast 

Fast fading occurs if the channel____________ changes rapidly within the symbol duration.

Description : Fast fading occurs if the channel____________ changes rapidly within the symbol duration.  a. Bandwidth b. Frequency c. Impulse response d. None of the above 

Last Answer : Fast fading occurs if the channel Impulse response changes rapidly within the symbol duration. 

Two methods describe how light propagates along an optical fiber. These methods define two theories of light propagation. What do we call these two theories?

Description : Two methods describe how light propagates along an optical fiber. These methods define two theories of light propagation. What do we call these two theories?

Last Answer : The ray theory and the mode theory.

When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage is being measured B. input impedance much less than the impedance across which the voltage is being measured C. sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Description : When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage ... sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Last Answer : Answer: A

Give reason: a) Food additives are widely used in modern life.b) Addition of artificial food additives should be minimized.

Description : Give reason: a) Food additives are widely used in modern life.b) Addition of artificial food additives should be minimized.

Last Answer : a) Food additives are widely used in modern life. Food additives are widely used to increase the shelf-life and nature of foods. b) Addition of artificial food additives should be minimized. Food additives if used regularly can cause health problems.

Which will solve the conjuncts of the rule so that the total cost is minimized? a) Constraint variable b) Conjunct ordering c) Data complexity d) All of the mentioned

Description : Which will solve the conjuncts of the rule so that the total cost is minimized? a) Constraint variable b) Conjunct ordering c) Data complexity d) All of the mentioned

Last Answer : b) Conjunct ordering

An auditor should design the written audit program so that a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date will be minimized. c. Each account balance will be tested under either tests of controls or tests of transactions. d. The audit procedures selected will achieve specific audit objectives

Description : An auditor should design the written audit program so that a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date ... controls or tests of transactions. d. The audit procedures selected will achieve specific audit objectives

Last Answer : The audit procedures selected will achieve specific audit objectives

An auditor should design a written audit program so that: a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date will be minimized. c. The audit procedures selected will achieve specific audit objectives. d. Each account balance will be tested under either tests of controls or tests of transactions

Description : An auditor should design a written audit program so that: a. All material transactions will be selected for substantive testing. b. Substantive tests prior to the balance sheet date will be minimized ... . d. Each account balance will be tested under either tests of controls or tests of transactions

Last Answer : The audit procedures selected will achieve specific audit objectives

An objective function which states the determinants of the quantity to be either maximized or minimized is called_______ a. Feasible function b. Optimal function c. Criterion function d. None of the above

Description : An objective function which states the determinants of the quantity to be either maximized or minimized is called_______ a. Feasible function b. Optimal function c. Criterion function d. None of the above

Last Answer : b. Optimal function

Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Description : Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Last Answer : Answer: Option D

The internal friction between the ingredients to concrete is minimized by (a) Adopting coarse aggregates (b) Using more water (c) Reducing the surface area (d) All of these

Description : The internal friction between the ingredients to concrete is minimized by (a) Adopting coarse aggregates (b) Using more water (c) Reducing the surface area (d) All of these

Last Answer : (d) All of these

The interaction between a transmission line and communication line is minimized by (a) transposing transmission as well as communication lines (b) increasing the height of the transmission line tower (c) increasing the distance between the two lines (d) all of the above

Description : The interaction between a transmission line and communication line is minimized by (a) transposing transmission as well as communication lines (b) increasing the height of the transmission line tower (c) increasing the distance between the two lines (d) all of the above

Last Answer : (d) all of the above

It may also be minimized by adding minimizes called stabilizers. These may be: a) Vanadium/Titanium b) Titanium/Niobium c) Niobium/Vanadium d) Vanadium/Titanium/Niobium

Description : It may also be minimized by adding minimizes called stabilizers. These may be: a) Vanadium/Titanium b) Titanium/Niobium c) Niobium/Vanadium d) Vanadium/Titanium/Niobium

Last Answer : b) Titanium/Niobium

Weld decay can be minimized by specifying steel with: a) Higher carbon level b) higher chromium level c) lower carbon level d) lower chromium level

Description : Weld decay can be minimized by specifying steel with: a) Higher carbon level b) higher chromium level c) lower carbon level d) lower chromium level

Last Answer : c) lower carbon level

Consider the situation in which assignment operation is very costly. Which of the following sorting algorithm should be performed so that the number of assignment operations is minimized in general? a) Insertion sort b) Selection sort c) Heap sort d) None

Description : Consider the situation in which assignment operation is very costly. Which of the following sorting algorithm should be performed so that the number of assignment operations is minimized in general? a) Insertion sort b) Selection sort c) Heap sort d) None

Last Answer : b) Selection sort

346- Side deflection of stalk can be minimized by.... (a) Having a short cutting stroke (b) Having an arrangement to obtain two cuts per stroke (c) Both (a) & (b) (d) None of the above

Description : 346- Side deflection of stalk can be minimized by.... (a) Having a short cutting stroke (b) Having an arrangement to obtain two cuts per stroke (c) Both (a) & (b) (d) None of the above

Last Answer : (c) Both (a) & (b)

Praziquantel is preferred over niclosamide for Taenia solium infestation because: A. It achieves higher cure rates B. It produces fewer side effects C. It does not lead to digestion of worm and kills encysted larvae, so that chances of cysticercosis are minimized D. Both ‘A’ and ‘B’ are correct

Description : Praziquantel is preferred over niclosamide for Taenia solium infestation because: A. It achieves higher cure rates B. It produces fewer side effects C. It does not lead to digestion of worm and kills encysted larvae, so that chances of cysticercosis are minimized D. Both ‘A’ and ‘B’ are correct

Last Answer : C. It does not lead to digestion of worm and kills encysted larvae, so that chances of cysticercosis are minimized

In case of a universal motor, torque pulsation is minimized by _________. (A) load inertia (B) rotor inertia (C) both rotor and load inertia (D) none of the above

Description : In case of a universal motor, torque pulsation is minimized by _________. (A) load inertia (B) rotor inertia (C) both rotor and load inertia (D) none of the above

Last Answer : Ans: C In a universal motor, torque pulsation is minimized by rotor and load inertia.

10. Pick out the appropriate alimentary route of administration when passage of drugs through liver is minimized: a) Oral b) Transdermal c) Rectal d) Intraduodenal

Description : 10. Pick out the appropriate alimentary route of administration when passage of drugs through liver is minimized: a) Oral b) Transdermal c) Rectal d) Intraduodenal

Last Answer : c) Rectal

Leakage fluxes in a transformer may be minimized by :

Description : Leakage fluxes in a transformer may be minimized by : (A) Avoiding overloads (B) Keeping magnetizing current minimum (C) Reducing the reluctance of the iron core to minimum (D) Sectionalizing and interleaving the primary and secondary windings

Last Answer : Leakage fluxes in a transformer may be minimized by : Sectionalizing and interleaving the primary and secondary windings

Precise control of reactive current flow entering the transmission and distribution systems can be minimized

Description : Precise control of reactive current flow entering the transmission and distribution systems can be minimized by using (A) synchronous condenser (B) static VAR capacitor (C) capacitor bank (D) thyristor switched reactor in parallel with capacitor

Last Answer : Precise control of reactive current flow entering the transmission and distribution systems can be minimized by using (A) synchronous condenser (B) static VAR capacitor (C) capacitor bank (D) thyristor switched reactor in parallel with capacitor

The steady state error of the system can be minimized by

Description : The steady state error of the system can be minimized by

Last Answer : The steady state error of the system can be minimized by increasing gain k

Corona losses are minimized when?

Description : Corona losses are minimized when?

Last Answer : Corona losses are minimized when smooth conductor is reduced.

The inductive interference between power and communication line can be minimized by?

Last Answer : The inductive interference between power and communication line can be minimized by transposition of the power line, transposition of the communication line.

The interaction between a transmission line and communication line is minimized by?

Last Answer : The interaction between a transmission line and communication line is minimized by transposing transmission as well as communication lines, increasing the height of the transmission line tower, increasing the distance between the two lines.

Identify the fastest wired media out of the following: Ethernet cable, Optical fiber, Co_axial cable -Technology

Description : Identify the fastest wired media out of the following: Ethernet cable, Optical fiber, Co_axial cable -Technology

Last Answer : Optical fiber

How to get data with optical fiber ?

Description : How to get data with optical fiber ?

Last Answer : Optical fiber (optical fiber ) is a type of thin , transparent fiber , usually made of glass or plastic , which is used to transmit light. Fiber optics is the branch of applied science and engineering that ... In this way our information goes to the recipient through the light fiber.

Optical fiber cable is more suitable in wired media- ?

Description : Optical fiber cable is more suitable in wired media- ?

Last Answer : Optical fiber cable is more suitable in wired media. Because optical fiber cable is a type of cable made of thousands of glass fibers through which data is transmitted at the speed of light. Laser beams are used to transfer data through this cable.

What is the use of optical fiber in health ?

Description : What is the use of optical fiber in health ?

Last Answer : To examine the inner wall of a patient's stomach, a light tube is inserted into the stomach through the mouth. One set of these light tubes illuminates the corresponding part of the stomach wall by sending ... of the blood vessels or the valves of the heart can be seen by inserting the light tube.