Description : What factors should be considered when selecting a primary cell for a power source?
Last Answer : Cost, size, ease of replacement, and voltage or current needs. b. Capacitance is the property of a circuit which opposes changes in voltage.
Description : What Two factors must be considered when selecting a suitable site for new air compressor?
Last Answer : Need answer
Description : What are the factors considered for selecting a cable?
Last Answer : Following factors considered for the selection of the cable. a. System voltage. b. Condition of installation. c. Continuous current to be carried. d. Maximum operating conductor temperature (70°). e. Ambient air ... copper cables), a' is area and t' is time duration of short circuit in seconds.
Description : What are the factors considered while selecting the components for machining on CNC machines?
Last Answer : Following are the factors to be considered in selecting components of CNC machines? 1. High precision and repeatability. 2. Reliability. 3. Efficiency -To meet the requirement of high precision. ... should be such that removal of swarf is easy and the chips do not fall on the slideways.
Description : State the factors to be considered for selecting transmission media.
Last Answer : Eight factors to be considered: 1. Type of medium. 2. No of conductors/connectors. 3. Flexibility. 4. Durability. 5. Bandwidth. 6. Reliability of connection 7. Required ... parallel wires 12. Resistance to external EMI outside the cable. 13. Attenuation characteristics 14. Cost
Description : State the factors to be considered while selecting refrigerants.
Last Answer : Selection criteria for refrigerant : 1. Working pressure range and pressure ratio. The pressure required to be maintained in the evaporator and condenser should be low enough to reduce the material ... . It should have moderate density in liquid form, a relatively high density in gaseous form.
Description : Enlist factors considered for selecting a testing tool for test automation.
Last Answer : The following factors are important during tool selection: i. Assessment of the organization's maturity (e.g. readiness for change); ii. Identification of the areas within the organization where ... the tool is another important point to be considered while selecting and deploying the test tool.
Description : Define transducer. State factors which are considered while selecting transducer for a particular application.
Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal. ... compatibility : The transducer should maintain input and output characteristic for the selected environmental condition.
Description : State any factors to be considered while selecting electrical welding system.
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }
Description : While selecting the location of an intake for collecting surface water, the factor considered, is (A) The intake point should be near as far as possible to the treatment plant (B) The intake point should ... (C) The intake point in meandering rivers should be on concave banks (D) All the above
Last Answer : (D) All the above
Description : State any four factors for selecting location of nuclear power plant.
Last Answer : i) Seismicity: If the area of a nuclear site is seismically active, it may not be used for nuclear power plant. ii) Water Availability: The nuclear power plants would need a ... Therefore, the site selected for such plant should have adequate arrangement for the disposal of radioactive waste.
Description : State why it is important for you to consider the ambient (surrounding) temperature of a conductor when selecting wire size.
Last Answer : The heat surrounding the conductor is an important part of total conductor heating.
Description : What three factors must be considered in the transmission of a surface wave to reduce attenuation?
Last Answer : (a) electrical properties of the terrain (b) frequency (c) polarization of the antenna
Description : Factors in Selecting an Online Resume Template?
Last Answer : There are different situations that require the use of a resume. Whether you are a student or a professional, a resume serves as a tool that provides a concise description of your experiences and ... so that you can try some variations. Using an online resume template gives you lots of options.
Description : What factors should I take into consideration when selecting a cheap dentist?
Last Answer : You should determine that the dentist specializes in the type of dental work that needs to be done. You should also discuss that you will be paying for the dental work yourself so there will be no ... plan. If there is a dental school nearby, check to see if they offer any relevant dental services.
Description : Which of the following factors leads to a Successful PPC Advertisement? a. Selecting Relevant Keywords b. Improved Landing Page Quality c. Quality Score d. All of the above
Last Answer : d. All of the above
Description : Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water ... 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only
Last Answer : a) 1, 2 and 3
Description : Which algorithm is used to decide the path to transfer the packets from source to destination? (1) Routing (2) Pathing (3) Selecting (4) Directing
Last Answer : Routing
Description : Water availability, temperature extremes, and __________ should be considered when selecting trees for the landscape. a. Slope b. Topography c. Soil type d. Buildings present
Last Answer : Soil typ
Description : All the following are chemical parameters considered when selecting an antiseptic or disinfectant except: a. Dehydration. b. Temperature. c. Stability. d. Ph
Last Answer : b. Temperature.
Description : Which of the following factor is not considered while selecting accounting policies? a) Prudence b) Substance over form c) Accountancy d) Materiality
Last Answer : c) Accountancy
Description : State the points to be considered while selecting survey stations.
Last Answer : Points to be considered while selecting survey stations. 1. Stations shall be inter visible. 2. Stations shall be so selected that well conditional triangles should be formed. 3. Stations shall be ... they run as close to details to be established as possible and only short offsets are needed.
Description : Discuss any 4 points to be considered while selecting a transducer for its intended applications.
Last Answer : 1. Operating range 2. Operating principle 3. Sensitivity 4. Accuracy 5. Frequency response and resonant frequency 6. Errors 7. Environmental compatibility 8. Usage and ruggedness. 9. ... 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. General selection criteria
Description : In the primary cell, why are negative ions attracted to the negative terminal of the cell?
Last Answer : The positive charge caused by electrons leaving the negative electrode attracts the negative ions.
Description : The leads to the primary and the high-voltage secondary windings of a power transformer usually are of what color?
Last Answer : Primary leads-black; secondary leads red.
Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?
Last Answer : Frequency stability.
Description : The peak power of a radar depends on the interrelationship of what other factors?
Last Answer : Average power, pulse width, and prt.
Description : The amount of optical power coupled into an optical fiber depends on what four factors?
Last Answer : (1) The angles over which the light is emitted. (2) The size of the source's light-emitting area relative to the fiber core size. (3) The alignment of the source and fiber. (4) The coupling characteristics of the fiber (such as the NA and the refractive index profile)
Description : What tool is used to de-energize capacitors in a circuit that has been disconnected from its power source?
Last Answer : Shorting probe.
Description : What device is used to switch power from the normal source to an alternate source for nonvital users?
Last Answer : What device is used to switch power from the normal source to an alternate source for nonvital users?
Description : A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?
Last Answer : (a) 330 volts. (b) E1 = 150 volts. E2 = 180 volts. (c) 1.98 kilowatts. (d) P1 = 900 watts. P2 = 1.08 kilowatts component but in a parallel circuit total current divides among the available paths.
Description : What condition gives maximum power transfer from the source to the load?
Last Answer : When the load resistance equals the source resistance.
Description : Power for the electronic digital multimeter is normally supplied by what internal power source?
Last Answer : Rechargeable batteries.
Description : Which connector should you use to connect the (a) power source and (b) load to the fuseholder shown in figure 2-12(A)?
Last Answer : a. Center connector b. Outside connector
Description : Which of the following statements about normal salt and water balance are true? A. The products of catabolism may be excreted by as little as 300 ml. of urine per day. B. The lungs represent ... of total body water. E. In normal humans, urine represents the greatest source of daily water loss.
Last Answer : Answer: CE DISCUSSION: The skin is the primary source of insensible water loss. Including losses from the lungs, this averages 600 to 900 ml. per day. Catabolism liberates water of solution. In ... still excrete a minimum of 500 to 800 ml. of urine per day to expel the products of catabolism
Description : Which of the following statement(s) is/are true about the role of macrophages in the wound healing process? a. Macrophages are the dominant cell type during the inflammatory phase of wound ... phagocytosis d. Macrophages are a source of a number of humoral factors essential for wound healing
Last Answer : Answer: a, d Within three or four days after injury, macrophages become the dominant cell type in the inflammatory phase of wound healing. The role of macrophages is not limited only ... . These studies confirm the dominant role of the macrophage and the inflammatory phase of wound healing
Description : What are the primary disadvantages of the magic-T?
Last Answer : Low power-handling capability and power losses
Description : What two variables determine the primary frequency of a resonant cavity?
Last Answer : Size and shape of the cavity.
Description : What is the primary purpose of a directional coupler?
Last Answer : Sampling energy within a waveguide.
Description : What is the primary purpose of a dummy load?
Last Answer : Absorb all energy without producing standing waves.
Description : . What primary condition must magnetic lines of force meet in order to exist?
Last Answer : Magnetic lines of force must form a continuous closed loop.
Description : What is the primary lower-frequency limitation of waveguides?
Last Answer : Physical size.
Description : What are the three primary colors of light?
Last Answer : Red, green and blue.
Description : What is the primary difference between the NPN and PNP amplifiers?
Last Answer : The polarity of the source voltage
Description : What two primary items determine the class of operation of an amplifier?
Last Answer : The amount of bias and the amplitude of the input signal
Description : What is the name of the emf generated in the primary that opposes the flow of current in the primary?
Last Answer : . Self-induced or counter emf
Description : What is the primary purpose of a synchro system?
Last Answer : Precise and rapid transmission of data between equipment and stations.
Description : What is one of the primary advantages of the FET when compared to the bipolar transistor?
Last Answer : High input impedance.
Description : What is the primary difference between the radio horizon and the natural horizon?
Last Answer : Sea water.