What is the mathematical relationship between a farad, a microfarad, and a picofarad.

What is the mathematical relationship between a farad, a  microfarad, and a picofarad.
by

1 Answer

Answer :

a. One microfarad equals 10-6 farad.  
 b. One picofarad equals 10-12 farad.
by

Related questions

What is the mathematical relationship between a farad, a microfarad, and a picofarad.

Description : What is the mathematical relationship between a farad, a microfarad, and a picofarad.

Last Answer : a. One microfarad equals 10-6 farad. b. One picofarad equals 10-12 farad.

What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Description : What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Last Answer : 144 seconds (t=R x C)

Define the term "farad."

Description : Define the term "farad."

Last Answer : A farad is the unit of capacitance. A capacitor has a capacitance of 1 farad when a difference of 1 volt will charge it with 1 coulomb of electrons.

Define the term "farad."

Description : Define the term "farad."

Last Answer : A farad is the unit of capacitance. A capacitor has a capacitance of 1 farad when a difference of 1 volt will charge it with 1 coulomb of electrons.

Calculate the capacitance of two parallel plates of area 2 units separated by a distance of 0.2m in air(in picofarad) a) 8.84 b) 88.4 c) 884.1 d) 0.884

Description : Calculate the capacitance of two parallel plates of area 2 units separated by a distance of 0.2m in air(in picofarad) a) 8.84 b) 88.4 c) 884.1 d) 0.884

Last Answer : b) 88.4

What computer language was developed for mathematical work?

Description : What computer language was developed for mathematical work?

Last Answer : FORTRAN.

What type of mathematical problem is solved by resolvers?

Description : What type of mathematical problem is solved by resolvers?

Last Answer : Right-triangle, or trigonometric, problems.

What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Description : What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Last Answer : 8. e = Emax sine θ.

What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Description : What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Last Answer : The capacitive reactance is approximately 4 kΩ .

What is the value of the capacitor in the astern valve position circuit shown in the illustration? EL-0099 A. 100 kFarad B. 0.5 microfarad C. 0.5 millifarad D. 50 kFarad

Description : What is the value of the capacitor in the astern valve position circuit shown in the illustration? EL-0099 A. 100 kFarad B. 0.5 microfarad C. 0.5 millifarad D. 50 kFarad

Last Answer : Answer: B

If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5 seconds

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5 seconds

Last Answer : Answer: C

If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms, which of the listed time intervals would equal one 'time constant'? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5.0 seconds

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms, which of the listed time intervals would equal one 'time constant'? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5.0 seconds

Last Answer : Answer: A

If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 3 Megohms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 3 Megohms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: D

If the values of C and R shown in the illustration were 1-microfarad and 3- Megohms respectively, which of the listed intervals would equal one 'time constant'? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Description : If the values of C and R shown in the illustration were 1-microfarad and 3- Megohms respectively, which of the listed intervals would equal one 'time constant'? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: B

Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Description : Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Last Answer : c) 8

Find the time constant for a R-C circuit for resistance R = 24 kohm and C = 16 microfarad. a) 1.5 millisecond b) 0.6 nanosecond c) 384 millisecond d) 384 microsecond

Description : Find the time constant for a R-C circuit for resistance R = 24 kohm and C = 16 microfarad. a) 1.5 millisecond b) 0.6 nanosecond c) 384 millisecond d) 384 microsecond

Last Answer : c) 384 millisecond

What is the impedance of a one microfarad capacitor at 60 Hertz: w) 16,700 ohms x) 2,650 ohms y) 3.8x10-4 ohms z) 6x10-5 ohms

Description : What is the impedance of a one microfarad capacitor at 60 Hertz: w) 16,700 ohms x) 2,650 ohms y) 3.8x10-4 ohms z) 6x10-5 ohms

Last Answer : ANSWER: X -- 2,650 OHMS

The effective capacitance of four, 5-microfarad capacitors connected in series is: w) 0.20 microfarad x) 0.5 microfarad y) 1.0 microfarad z) 1.25 microfarad

Description : The effective capacitance of four, 5-microfarad capacitors connected in series is: w) 0.20 microfarad x) 0.5 microfarad y) 1.0 microfarad z) 1.25 microfarad

Last Answer : ANSWER: Z -- 1.25 MICROFARAD

What's the mathematical relationship between the system volume and the master volume control on my speaker?

Description : What's the mathematical relationship between the system volume and the master volume control on my speaker?

Last Answer : I don't think it's possible to answer, since you're measuring apples and oranges. Software volume is controlled differently than hardware volume. (This is why you should always control ... an analog dial rather than with software; lower software volume degrades signal and causes downsampling.)

Which mathematical symbol set expresses a negated relationship? -Technology

Description : Which mathematical symbol set expresses a negated relationship? -Technology

Last Answer : Negated Relations symbols that express a negated relationship.

What mathematical relationship exists between kinetic energy and mass?

Description : What mathematical relationship exists between kinetic energy and mass?

Last Answer : Kinetic energy = 0.5 x mass x speed squared.This formula is for the special case that the speed is non-relativistic, i.e., much slower than the speed of light.

What does Ohm's law describe the mathematical relationship between?

Description : What does Ohm's law describe the mathematical relationship between?

Last Answer : It describes the relation between voltage, current and theresistance of the circuit.

27. The mathematical model of an LP problem is important because a. It helps in converting the verbal description & numerical data into mathematical expression b. Decision-makers prefer to work with formal models c. It captures the relevant relationship among decision factors d. It enables the use of algebraic technique

Description : 27. The mathematical model of an LP problem is important because a. It helps in converting the verbal description & numerical data into mathematical expression b. Decision-makers prefer to ... captures the relevant relationship among decision factors d. It enables the use of algebraic technique

Last Answer : a. It helps in converting the verbal description & numerical data into mathematical expression

Why 0.04 micro farad capacitor is used in a thermistor based fire alarm?

Description : Why 0.04 micro farad capacitor is used in a thermistor based fire alarm?

Last Answer : Need answer

'Farad' is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Description : 'Farad' is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : (1) Capacitance Explanation: The Farad is the SI derived unit of capacitance. It is named after the English physicist Michael Faraday.

What is the SI unit of frequency? (1) Newton (2) Watt (3) Farad (4) Hertz

Description : What is the SI unit of frequency? (1) Newton (2) Watt (3) Farad (4) Hertz

Last Answer : (4) Hertz Explanation: The number of waves or vibrations passing through a point in one second is called Frequency. The SI (System International) Unit of Frequency is Hertz(Hz).

What is unit of Electrical Capacity? (1) henry (2) farad (3) volt (4) ohm

Description : What is unit of Electrical Capacity? (1) henry (2) farad (3) volt (4) ohm

Last Answer : (2) farad Explanation: Henry is unit of Magnetic Induction, volt is unit of Potential Difference, ohm is unit of Electric Resistance.

The unit of electrical power is the _____________. A. ampere B. kilovolt C. watt D. farad

Description : The unit of electrical power is the _____________. A. ampere B. kilovolt C. watt D. farad

Last Answer : Answer: C

The basic measuring unit of inductance is the _________. A. coulomb B. ohm C. farad D. henry

Description : The basic measuring unit of inductance is the _________. A. coulomb B. ohm C. farad D. henry

Last Answer : Answer: D

What is farad?

Description : What is farad? 

Last Answer : Farad is the unit of capacitance and the letter F denotes it. A condenser has a capacitance of one (1) farad, if it is capable to maintain a charge of one coulomb under a potential difference of one volt between its plates. 1 farad = 1 coulomb / 1 volt. = Q/V.  

Farad is defined as: a. Coulomb / volt b. Ampere / volt c. Coulomb / joule d. Joule / Coulomb

Description : Farad is defined as: a. Coulomb / volt b. Ampere / volt c. Coulomb / joule d. Joule / Coulomb

Last Answer : d. Joule / Coulomb

A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination?

Description : A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination? 

Last Answer : ANSWER: 6 FARADS

If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Description : If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Last Answer : ANSWER: 9 FARADS

A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Description : A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Last Answer : ANSWER: 200 COULOMBS

A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Description : A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Last Answer : ANSWER: 4/3 FARADS

‘Farad’ is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Description : ‘Farad’ is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : Capacitance

what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Description : what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Last Answer : the total capacitace when connected in parallel Tc=total capacitor c1=c2=c3=0.5uf Tc=c1+c2+c3 Tc=1.5uf

What does "tinning" mean in relationship to soldering?

Description : What does "tinning" mean in relationship to soldering?

Last Answer : The coating of the material to be soldered with a light coat of solder.

Assuming the wall of a waveguide is perfectly flat, what is the angular relationship between the angle of incidence and the angle of reflection

Description : Assuming the wall of a waveguide is perfectly flat, what is the angular relationship between the angle of incidence and the angle of reflection

Last Answer : The angles are equal.

For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Description : For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Last Answer : The field must be perpendicular to the conductors.

What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Description : What is the fundamental difference between the phase relationship of the harmonics of the square wave as compared to the harmonics of a peaked wave?

Last Answer : All the odd harmonics are in phase with the fundamental in the square wave. This is not true of the odd harmonics in the peaked wave.

In a parallel-resonant circuit, what is the relationship between impedance and current?

Description : In a parallel-resonant circuit, what is the relationship between impedance and current?

Last Answer : Maximum impedance, minimum current.

. In an "ideal" resonant circuit, what is the relationship between impedance and current?

Description : . In an "ideal" resonant circuit, what is the relationship between impedance and current?

Last Answer : Impedance low Current high.

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

When a CT is on electrical zero, what is the relationship between its rotor and the S2 winding?

Description : When a CT is on electrical zero, what is the relationship between its rotor and the S2 winding?

Last Answer : They are perpendicular to each other.

What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Description : What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Last Answer : The voltages are equal and oppose each other.

The input and output signals of a JFET amplifier have what phase relationship?

Description : The input and output signals of a JFET amplifier have what phase relationship?

Last Answer : They are 180 degrees out of phase.

The ideal radar spectrum has what relationship to the carrier frequency?

Description : The ideal radar spectrum has what relationship to the carrier frequency?

Last Answer : Symmetrical above and below the carrier frequency.