To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

To properly bias an NPN transistor, what polarity voltage is  applied to the collector, and what is its relationship to the base  voltage?
by

1 Answer

Answer :

Positive, more positive.
by

Related questions

What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

What percentage of current in an NPN transistor reaches the collector?

Description : What percentage of current in an NPN transistor reaches the collector?

Last Answer : 98 percent.

Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Description : Which of the procedures listed could result in damaging a transistor beyond repair? A. Applying incorrect polarity to the collector circuit. B. Applying excessive voltage to the input circuit. C. Careless soldering which would overheat the transistor. D. All of the above.

Last Answer : Answer: D

If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the input signal C) Need for high dc collector supply D) Clipping of output in the negative half of the input signal

Description : If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the ... for high dc collector supply D) Clipping of output in the negative half of the input signal

Last Answer : B) Clipping of output in the positive half of the input signal

What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Description : What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Last Answer : Negative

When an NPN transistor is properly biased then most of the electrons from the emitter

Description : When an NPN transistor is properly biased then most of the electrons from the emitter   (A) recombine with holes in the base (B) recombine in the emitter itself (C) pass through the base to the collector (D) are stopped by the junction barrier

Last Answer : a

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

In the NPN transistor, what section is made very thin compared with the other two sections?

Description : In the NPN transistor, what section is made very thin compared with the other two sections?

Last Answer : The P or base section.

In which direction does the arrow point on an NPN transistor?

Description : In which direction does the arrow point on an NPN transistor?

Last Answer : Outward.

The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Description : The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Last Answer : ANSWER: Y -- COLLECTOR CURRENT

In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Description : In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Last Answer : (a) NPN

A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Description : A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Last Answer : Negative potential.

In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Description : In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Last Answer : Answer: C

In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Description : In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Last Answer : Answer: D

How is the collector lead identified on an oval-shaped transistor?

Description : How is the collector lead identified on an oval-shaped transistor?

Last Answer : By the wide space between the collector lead and the other two leads (emitter and base)

As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Description : As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Last Answer : Answer: D

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Description : A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Last Answer : (a) Emitter

Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Description : Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Last Answer : b) 250

In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Description : In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Last Answer : a) located on emitter

For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Description : For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Last Answer : (c) reverse biased

The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Description : The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Last Answer : (d) none of above

In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Description : In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Last Answer : c) base

The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Description : The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Last Answer : (b) emitter

What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Description : What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Last Answer : ANSWER: Z -- EMITTER, BASE, COLLECTOR

A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be

Description : A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be

Last Answer : A transistor has a typical value of β = 200 , If the collector current is 15 mA, then base current will be 0.075 mA

When an NPN transistor is saturated its Vce?

Description : When an NPN transistor is saturated its Vce?

Last Answer : is zero

Which of the symbols shown in the illustration represents an NPN type transistor? EL-0078 A. A B. B C. C D. D

Description : Which of the symbols shown in the illustration represents an NPN type transistor? EL-0078 A. A B. B C. C D. D

Last Answer : Answer: B

PNP and NPN transistor:

Description : PNP and NPN transistor:

Last Answer : PNP transistors is the one in which one N, type semiconductor is sandwiched in between two P type or accepter diodes while NPN transistor is the one in which two N type semiconductors are fitted on the both sides of p-type semiconductor to allow to pass current from them.

Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Description : Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Last Answer : Configuration - Common Emitter Common Collector Common Base

With neat diagram explain working of NPN transistor.

Description : With neat diagram explain working of NPN transistor.

Last Answer : N-p-n transistor is made by sandwiching thin layer of p-type semiconductor between two layers of n-type semiconductor. It has three terminals - Emitter, Base and collector. The npn transistor has two ... up in the collector as it is more positive. In this way, current flows in the transistor.

In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit

Description : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit (1) All calculations done earlier have to be repeated (2) Replace all calculated voltages by ... all calculated currents by reverse values (4) Replace all calculated voltages and currents by reverse values 

Last Answer : In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit  Replace all calculated voltages and currents by reverse values 

In an npn transistor, _____ are the minority carriers.

Description : In an npn transistor, _____ are the minority carriers.   (a) Free electrons (b) Acceptor ions (c) Donor ions (d) Holes

Last Answer : In an npn transistor, Holes are the minority carriers.

What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Description : What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Last Answer : The negative-resistance property.

What type of feedback is usually caused by the base-to collector interelectrode capacitance?

Description : What type of feedback is usually caused by the base-to collector interelectrode capacitance?

Last Answer : Degenerative or negative

The speed of a multi-speed, squirrel-cage, induction motor operating in a fixed frequency system can be changed by _____________. A. reconnecting stator windings for different numbers of poles B. changing the RPM of the rotor flux C. changing the phase sequence of the applied voltage D. reconnecting the stator so that no poles have the same polarity

Description : The speed of a multi-speed, squirrel-cage, induction motor operating in a fixed frequency system can be changed by _____________. A. reconnecting stator windings for different numbers of poles B. ... sequence of the applied voltage D. reconnecting the stator so that no poles have the same polarity

Last Answer : Answer: A

As shown in the illustration, the direction of electron flow through the component is _______. EL-0079 A. from terminal 'B' to terminal 'A' B. from terminal 'A' to terminal 'B' C. determined by the polarity of the applied voltage D. opposite from that in a resistor

Description : As shown in the illustration, the direction of electron flow through the component is _______. EL-0079 A. from terminal 'B' to terminal 'A' B. from terminal 'A' to terminal 'B' C. determined by the polarity of the applied voltage D. opposite from that in a resistor

Last Answer : Answer: B

Severe vibration, accompanied by flashover at the collector rings of an alternator operating in parallel, is a symptom of _____________. A. reverse current motorization B. loss of synchronism C. destructive overspeeding D. reversed polarity

Description : Severe vibration, accompanied by flashover at the collector rings of an alternator operating in parallel, is a symptom of _____________. A. reverse current motorization B. loss of synchronism C. destructive overspeeding D. reversed polarity

Last Answer : Answer: B

What is the primary difference between the NPN and PNP amplifiers?

Description : What is the primary difference between the NPN and PNP amplifiers?

Last Answer : The polarity of the source voltage

What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Description : What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Last Answer : -5 volts.

A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Description : A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Last Answer : Increases.

Why does using ac vice dc bias voltage result in a stronger output signal?

Description : Why does using ac vice dc bias voltage result in a stronger output signal?

Last Answer : Because an ac bias voltage of the proper frequency and level places the input signal away from both steps in the magnetism curve. The result is two undistorted output signals that are combined into one strong output.

What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Description : What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Last Answer : a. Reproduces a stronger output signal. b. Greatly improves the SNR. c. Greatly reduces the natural tape hiss.

Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Description : Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Last Answer : With dc bias, the SNR is poor because only a small portion of the magnetism curve is straight enough to use, thus the output signal is weak compared with the natural tape hiss.

When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

The width of depletion layer of a P-N junction – (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Description : The width of depletion layer of a P-N junction – (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Last Answer : (4) is increased under reverse bias Explanation: The total width of the depletion region is a function of applied reverse-bias and impurity concentration. Forward bias decreases the depletion region width whilst reverse bias increases it.