What are three reasons circuit control is needed?

What are three reasons circuit control is needed?
by

1 Answer

Answer :

To remove power from a malfunctioning device; to remove power  from a device you wish to work on and restore power when the work  is completed; to turn devices on and off as the device is needed; to  select the function or circuit desired within a device.
by

Related questions

What is needed to use a monostable or one-shot multivibrator for a clock circuit?

Description : What is needed to use a monostable or one-shot multivibrator for a clock circuit?

Last Answer : Triggers.

What are the three types of circuit control devices?

Description : What are the three types of circuit control devices?

Last Answer : Switches, solenoids, and relays.

What does a tone control circuit in a receiver do to the audio signal?

Description : What does a tone control circuit in a receiver do to the audio signal?

Last Answer : It controls the amount of bass and treble response.

What type of switch should be used to control a circuit that requires a temporary actuation signal?

Description : What type of switch should be used to control a circuit that requires a temporary actuation signal?

Last Answer : A momentary switch.

The 'function generator' of the control circuit illustrated _______________. EL-0095 A. can be programmed to produce a non-linear output for a linear input depending on operating conditions B. is used for controlling relay contacts' positions in selection circuits C. automatically selects which or how many engines are needed for a required vessel speed D. all of the above

Description : The 'function generator' of the control circuit illustrated _______________. EL-0095 A. can be programmed to produce a non-linear output for a linear input depending on operating conditions B. is used for ... which or how many engines are needed for a required vessel speed D. all of the above

Last Answer : Answer: A

What are the three requirements necessary for oscillations to exist in a circuit?

Description : What are the three requirements necessary for oscillations to exist in a circuit?

Last Answer : Amplification, regenerative feedback, and frequency-determining device.

Name the three methods of interconnecting components in multilayer printed circuit boards.

Description : Name the three methods of interconnecting components in multilayer printed circuit boards.

Last Answer : Clearance hole, plated-through hole, and layer build-up

A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Description : A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Last Answer : (a) 160 ohms. (b) 480 ohms

What are the three time delay ratings for circuit breakers?

Description : What are the three time delay ratings for circuit breakers?

Last Answer : Instantaneous, short time delay, and long time delay.

What are the three types of circuit breaker trip elements?

Description : What are the three types of circuit breaker trip elements?

Last Answer : Thermal, magnetic, and thermal-magnetic

What are the three conditions that require circuit protection?

Description : What are the three conditions that require circuit protection?

Last Answer : A direct short, excessive current and excessive heat.

What is one of the major reasons for the fading of radio waves which have been reflected from a surface?

Description : What is one of the major reasons for the fading of radio waves which have been reflected from a surface?

Last Answer : Shifting in the phase relationships of the wave.

List two reasons why fusion splicing is one of the most popular splicing techniques in commercial applications.

Description : List two reasons why fusion splicing is one of the most popular splicing techniques in commercial applications.

Last Answer : . The small size of the fusion splice and the development of automated fusion-splicing machines.

The Navy recommends using the rotary splice for what two reasons?

Description : The Navy recommends using the rotary splice for what two reasons?

Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.

In addition to a primary coating, manufacturers add a layer of buffer material for what reasons?

Description : In addition to a primary coating, manufacturers add a layer of buffer material for what reasons?

Last Answer : To provide additional mechanical protection and preserve the fiber's inherent strength.

Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Description : Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Last Answer : To increase performance and reduce cost

Give two reasons why the value of the normalized frequency (V) is varied in single mode stepindex fibers?

Description : Give two reasons why the value of the normalized frequency (V) is varied in single mode stepindex fibers?

Last Answer : To increase performance and reduce losses caused by bending and splicing.

Satellite orientation in space is important for what two reasons?

Description : Satellite orientation in space is important for what two reasons?

Last Answer : To allow maximum solar cell exposure to the sun and satellite antenna exposure to earth terminals.

State the reasons that the Navy is getting away from the use of asbestos insulation.

Description : State the reasons that the Navy is getting away from the use of asbestos insulation.

Last Answer : Breathing asbestos fibers can cause lung disease and/or cancer

In a bistable multivibrator, how many trigger pulses are needed to produce one complete cycle in the output?

Description : In a bistable multivibrator, how many trigger pulses are needed to produce one complete cycle in the output?

Last Answer : Two.

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

How many of these gates would be needed to add a four digit number?

Description : How many of these gates would be needed to add a four digit number?

Last Answer : Four.

When an SCR is forward biased, what is needed to cause it to conduct?

Description : When an SCR is forward biased, what is needed to cause it to conduct?

Last Answer : A gate signal.

Why is damping needed in a practical servo system?

Description : Why is damping needed in a practical servo system?

Last Answer : . To minimize overshoot and/or oscillations.

You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. Testing an energized circuit presents a hazard to the testing personnel. B. A faulty fuse could go undetected with the motor energized. C. Reversed polarity of the circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Description : You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. ... circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Last Answer : Answer: B

What are three electrical components needed for current flow in basic electrical circuit?

Description : What are three electrical components needed for current flow in basic electrical circuit?

Last Answer : Feel Free to Answer

The reasons leading to popularity of client-server systems are: A) More powerful workstations on LANs B) Needed for graphical user interfaces of end users. C) Remove computing load for presentation services from the system managing a shared database resource. D) All

Description : The reasons leading to popularity of client-server systems are: A) More powerful workstations on LANs B) Needed for graphical user interfaces of end users. C) Remove computing load for presentation services from the system managing a shared database resource. D) All

Last Answer : D) All

What are the three types of control synchros?

Description : What are the three types of control synchros?

Last Answer : CX, CT, and CDX.

The control electronics component of a floppy or hard disk drive performs what three main functions?

Description : The control electronics component of a floppy or hard disk drive performs what three main functions?

Last Answer : a. Spins the disk at the correct speed. b. Moves the heads across the recording surface. c. Tells the write/read heads when to write data and when to read it.

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

What type circuit is used to produce square or rectangular waves?

Description : What type circuit is used to produce square or rectangular waves?

Last Answer : Multivibrator.

. What characteristic of an RL circuit allows it to act as an integrator?

Description : . What characteristic of an RL circuit allows it to act as an integrator?

Last Answer : The ability of the inductor to oppose a change in current.

What are the requirements for an integration circuit?

Description : What are the requirements for an integration circuit?

Last Answer : The time constant is long and the output is taken across the capacitor in an RC circuit.

If C4 were removed from the circuit, what would happen to the output of the amplifier?

Description : If C4 were removed from the circuit, what would happen to the output of the amplifier?

Last Answer : The output would decrease. (C4 decouples R2 preventing degenerative feedback from R2.)

Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Description : Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Last Answer : Yes.

If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Description : If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Last Answer : The gain decreases.

What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Description : What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Last Answer : The coupling capacitor (C3).

What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Last Answer : Bandwidth of the circuit

When is line current minimum in a parallel-LC circuit?

Description : When is line current minimum in a parallel-LC circuit?

Last Answer : At the resonant frequency.

In a parallel-resonant circuit, what is the relationship between impedance and current?

Description : In a parallel-resonant circuit, what is the relationship between impedance and current?

Last Answer : Maximum impedance, minimum current.

What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?

Description : What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?

Last Answer : Natural frequency or resonant frequency (f r).

When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?

Description : When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?

Last Answer : . Capacitor.

When the capacitor is completely discharged, where is the energy of the tank circuit stored?

Description : When the capacitor is completely discharged, where is the energy of the tank circuit stored?

Last Answer : Inductor magnetic field

In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Description : In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Last Answer : Nonresonant (circuit is either above or below resonance)

. In an "ideal" resonant circuit, what is the relationship between impedance and current?

Description : . In an "ideal" resonant circuit, what is the relationship between impedance and current?

Last Answer : Impedance low Current high.

In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Description : In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Last Answer : Resultant reactance.

What is the output current in the common-collector circuit?

Description : What is the output current in the common-collector circuit?

Last Answer : IE.