What is used to allow an ammeter to measure different ranges?

What is used to allow an ammeter to measure different  ranges?
by

1 Answer

Answer :

Shunt resistors (internal or external).
by

Related questions

What method is used to allow a voltmeter to have several ranges?

Description : What method is used to allow a voltmeter to have several ranges?

Last Answer : The use of resistors in series with the meter movement.

What electrical property does an ammeter measure?

Description : What electrical property does an ammeter measure?

Last Answer : Current.

A DC ammeter has resistance `0.1 Omega` and its current ranges `0-100 A`. If the range is to be extended to `0-500`, then the following shunt resistan

Description : A DC ammeter has resistance `0.1 Omega` and its current ranges `0-100 A`. If the range is to be extended to `0-500`, then the following shunt resistan

Last Answer : A DC ammeter has resistance `0.1 Omega` and its current ranges `0-100 A`. If the range is to be extended ... Omega` C. `0.025 Omega` D. `0.25 Omega`

To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws of the instrument around the insulated conductor C. connect the voltage test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Description : To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws ... test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Last Answer : Answer: B

Is an ammeter connected in series or in parallel with the circuit under test?

Description : Is an ammeter connected in series or in parallel with the circuit under test?

Last Answer : . In series.

Why will an ammeter be damaged if connected in parallel with the circuit to be measured?

Description : Why will an ammeter be damaged if connected in parallel with the circuit to be measured?

Last Answer : Since the ammeter has a small resistance compared to the load, it will have very high current if it is connected in parallel. This high current will damage the meter.

What range of an ammeter is selected for the final measurement?

Description : What range of an ammeter is selected for the final measurement?

Last Answer : A range that allows a meter reading near the center of the scale.

Why should you use the highest range of an ammeter for the initial measurement?

Description : Why should you use the highest range of an ammeter for the initial measurement?

Last Answer : To prevent damage to the meter movement from excessive current.

What is ammeter sensitivity?

Description : What is ammeter sensitivity?

Last Answer : The amount of current that will cause full-scale deflection.

How does an ammeter affect the circuit being measured?

Description : How does an ammeter affect the circuit being measured?

Last Answer : Since the ammeter is a resistor in series with the load, it increases the resistance of the circuit and lowers circuit current.

How is an ammeter connected to the circuit under test?

Description : How is an ammeter connected to the circuit under test?

Last Answer : In series.

An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Description : An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Last Answer : Negative, positive

What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Description : What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Last Answer : Tape deformation, oxide shedding, head-to-tape sticking, layer to-layer sticking, dirt build-up, and excessive tape and head wear.

Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Description : Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Last Answer : Ideally, use and store tape at 60 to 80º F and at 40 to 60% relative humidity.

Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Description : Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Last Answer : Polarit

What is used to provide the ohmmeter with several ranges?

Description : What is used to provide the ohmmeter with several ranges?

Last Answer : An ohmmeter has several internal range resistors and a switch or a series of jacks to select the proper range.

Two resistors `400Omega` and `800Omega` are connected in series with a `6V` battery. It is desired to measure the current in the circuit. An ammeter o

Description : Two resistors `400Omega` and `800Omega` are connected in series with a `6V` battery. It is desired to measure the current in the circuit. An ammeter o

Last Answer : Two resistors `400Omega` and `800Omega` are connected in series with a `6V` battery. It is desired to measure the current ... .95` V C. `3.8` V D. 4 V

Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

Which instrument is used to measure altitudes in aircraft’s? (1) Audiometer (2) Ammeter (3) Altimeter (4) Anemometer

Description : Which instrument is used to measure altitudes in aircraft’s? (1) Audiometer (2) Ammeter (3) Altimeter (4) Anemometer

Last Answer : (3) Altimeter Explanation: Ammeter - Measures strength of electric current. Audiometer - Measures intensity of sound. Anemometer - Measures force and velocity of wind and directions.

Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : (2) Anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, and ... between the pressure and the speed, an anemometer designed for one will give information about both.

You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should _____________. A. replace the batteries in the instrument B. measure resistance by dividing the voltmeter indication by the ammeter indication C. set the pointer using a bridge D. change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

An ammeter should be used to measure ___________. A. the voltage between two points in a circuit B. circuit continuity C. current flow in a circuit D. total or partial circuit resistance

Description : An ammeter should be used to measure ___________. A. the voltage between two points in a circuit B. circuit continuity C. current flow in a circuit D. total or partial circuit resistance

Last Answer : Answer: C

___ ammeter is used to measure high-frequency currents.

Description : ___ ammeter is used to measure high-frequency currents.

Last Answer : thermocouple

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

Which one of the following is the name of a device used to measure voltage without drawing ANY current from the circuit being measured? Is it: w) a wattmeter x) a galvanometer y) an ammeter z) a potentiometer

Description : Which one of the following is the name of a device used to measure voltage without drawing ANY current from the circuit being measured? Is it: w) a wattmeter x) a galvanometer y) an ammeter z) a potentiometer

Last Answer : ANSWER: Z -- A POTENTIOMETER

Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : Anemometer

An ammeter is an electrical instrument used to measure

Last Answer : Ammeter is an measuring device which is used to measure electric  current in Ampere.this measuring device used for measuring   current of all  electrical components

The current transformer that is used to measure a 100 A current by 5 A ammeter is a_____.

Description : The current transformer that is used to measure a 100 A current by 5 A ammeter is a_____.

Last Answer : The current transformer that is used to measure a 100 A current by 5 A ammeter is a step up transformer

can ammeter measure ac?

Last Answer : Yes it can...

Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration. b) 10-15 mm Hg water pressure. A measure of 10–15 mm Hg water pressure would indicate that the cuff is underinflated. c) 30-35 mm Hg water pressure. A measure of 30–35 mm Hg water pressure would indicate that the cuff is overinflated. d) 0-5 mm Hg water pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

What unit is used to measure the different wavelengths of light?

Description : What unit is used to measure the different wavelengths of light?

Last Answer : Angstrom unit.

What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

What do the smaller circuits in third generation computers allow for?

Description : What do the smaller circuits in third generation computers allow for?

Last Answer : Faster internal processing speeds.

Which of the following is true in Statistical reasoning? a) The representation is extended to allow some kind of numeric measure of certainty to be associated with each statement b) The representation is extended to allow ‘TRUE or FALSE’ to be associated with each statement c) The representation is extended to allow some kind of numeric measure of certainty to be associated common to all statements

Description : Which of the following is true in Statistical reasoning? a) The representation is extended to allow some kind of numeric measure of certainty to be associated with each statement b) The ... extended to allow some kind of numeric measure of certainty to be associated common to all statements

Last Answer : a) The representation is extended to allow some kind of numeric measure of certainty to be associated with each statement

Ethical hacking will allow to____ all the massive security breaches. A. Remove. B. Measure. C. Reject. D. None of these.

Description : Ethical hacking will allow to____ all the massive security breaches. A. Remove. B. Measure. C. Reject. D. None of these.

Last Answer : B. Measure.

Oscilloscopes are used to measure what quantities?

Description : Oscilloscopes are used to measure what quantities?

Last Answer : Amplitude, phase, time, and frequency.

When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Description : When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Last Answer : 420 ohms.

What Navy office oversees the MEASURE program?

Description : What Navy office oversees the MEASURE program?

Last Answer : The Chief of Naval Operations.

What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Description : What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Last Answer : Special-purpose electronic test equipment.

What are the three units of measure most commonly used when referring to af power measurements?

Description : What are the three units of measure most commonly used when referring to af power measurements?

Last Answer : DB, dBm, and vu.

What does vswr measure?

Description : What does vswr measure?

Last Answer : The existence of voltage variations on a line.

What are analog computers designed to measure?

Description : What are analog computers designed to measure?

Last Answer : Continuous electrical or physical conditions.

What equipment uses a calibrated resonant circuit to measure frequency?

Description : What equipment uses a calibrated resonant circuit to measure frequency?

Last Answer : Wavemeter.

You plan to measure your tape recorder’s SNR. What test equipment will you need?

Description : You plan to measure your tape recorder’s SNR. What test equipment will you need?

Last Answer : A VTVM and a signal generator.

Transconductance is a measure of the relationship between what two factors?

Description : Transconductance is a measure of the relationship between what two factors?

Last Answer : The changes in plate current and grid voltage.

What fiber property does numerical aperture (NA) measure?

Description : What fiber property does numerical aperture (NA) measure?

Last Answer : NA measures the light-gathering ability of an optical fiber.

Primary storage capacities are usually specified in what unit of measure?

Description : Primary storage capacities are usually specified in what unit of measure?

Last Answer : Number of bytes.

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

How is it possible to use a current sensitive meter movement to measure voltage?

Description : How is it possible to use a current sensitive meter movement to measure voltage?

Last Answer : Since the resistance of a meter movement remains the same as the pointer is deflected, the amount of current through the movement is proportional to the voltage applied. Therefore, only the scale of the movement must be changed.