What are analog computers designed to measure?

What are analog computers designed to measure?
by

1 Answer

Answer :

Continuous electrical or physical conditions.
by

Related questions

What is the fundamental difference between analog and digital computers?

Description : What is the fundamental difference between analog and digital computers?

Last Answer : Digital computers deal with discrete quantities, while analog computers deal with continuous physical variables.

What are computers called that combine the functions of both analog and digital computers?

Description : What are computers called that combine the functions of both analog and digital computers?

Last Answer : Hybrid computers.

Early analog computers were what type of devices?

Description : Early analog computers were what type of devices?

Last Answer : Mechanical or electromechanical.

All analog computers are what type of computers?

Description : All analog computers are what type of computers?

Last Answer : Special-purpose.

The Navy uses analog computers primarily for what purpose?

Description : The Navy uses analog computers primarily for what purpose?

Last Answer : Gun fire control

What is another name for computers designed to be character-oriented or character-addressable?

Description : What is another name for computers designed to be character-oriented or character-addressable?

Last Answer : Variable-word-length or byte-addressable.

What were the first computers designed to manipulate in order to solve arithmetic problems?

Description : What were the first computers designed to manipulate in order to solve arithmetic problems?

Last Answer : Numbers.

What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Description : What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Last Answer : Special-purpose electronic test equipment.

Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Description : Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Last Answer : LEDs require less complex circuitry than lasers.

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

How is the accuracy of an analog computer restricted?

Description : How is the accuracy of an analog computer restricted?

Last Answer : By the accuracy with which physical quantities can be sensed and displayed.

Why has the transmission of video using analog techniques been very popular, especially for shorter distances?

Description : Why has the transmission of video using analog techniques been very popular, especially for shorter distances?

Last Answer : Because cost can be minimized and complex multiplexing and timing equipment is unnecessary.

What type of modulation do most analog fiber optic communications systems use?

Description : What type of modulation do most analog fiber optic communications systems use?

Last Answer : Intensity modulation.

What is an analog signal?

Description : What is an analog signal?

Last Answer : A continuous signal that varies in a direct proportion to the instantaneous value of a physical

What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

What happened to the combination of analog and digital computers ?

Last Answer : : A combination of analog and digital computers - hybrid computers.

Which of the following is not the classification of computers based on application? A) Electronic Computers B) Analog Computers C) Digital Computers D) Hybrid Computers

Description : Which of the following is not the classification of computers based on application? A) Electronic Computers B) Analog Computers C) Digital Computers D) Hybrid Computers

Last Answer : Answer : A

Which of the following class of computers can process physical quantities such as speed? A) Analog Computers B) Digital Computers C) Hybrid Computers D) None of above

Description : Which of the following class of computers can process physical quantities such as speed? A) Analog Computers B) Digital Computers C) Hybrid Computers D) None of above

Last Answer : Answer : A

The computer that can input analog signals and return result in digital form A) Analog Computers B) Digital Computers C) Hybrid Computers D) Mainframe Computers

Description : The computer that can input analog signals and return result in digital form A) Analog Computers B) Digital Computers C) Hybrid Computers D) Mainframe Computers

Last Answer : Answer : C

What are the computers called that performs calculations and comparisons usually in the binary numbering system? A) Analog Computers B) Digital Computers C) Hybrid Computers D) None of above

Description : What are the computers called that performs calculations and comparisons usually in the binary numbering system? A) Analog Computers B) Digital Computers C) Hybrid Computers D) None of above

Last Answer : Answer : B

Which of the following is a class of computers based on model? A) Digital Computer B) Hybrid Computers C) Analog Computers D) AT Computers

Description : Which of the following is a class of computers based on model? A) Digital Computer B) Hybrid Computers C) Analog Computers D) AT Computers

Last Answer : Answer : D

On which aspect the analog computers are better than digital? A) Speed B) Accuracy C) Reliability D) Automatic

Description : On which aspect the analog computers are better than digital? A) Speed B) Accuracy C) Reliability D) Automatic

Last Answer : Answer : B

Which of the following statement is false? A) Mechanical analog computers have existed for thousands of years B) There are mechanical analog computers and electronic analog computers. C) All electronic computers are digital computers D) All of above are false

Description : Which of the following statement is false? A) Mechanical analog computers have existed for thousands of years B) There are mechanical analog computers and electronic analog computers. C) All electronic computers are digital computers D) All of above are false

Last Answer : Answer : C

A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers

Description : A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers

Last Answer : (D) Analog & Digital computers

Differentiate between analog and digital computers

Description : Differentiate between analog and digital computers

Last Answer :  Analog computer:  Analog computers represent and process data by measuring quantities such as voltage and current to solve a problem.  They work on supply of continuous signals as input. ... memory capacity.  They are being used in business, education, health, supermarkets & banking. 

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Description : The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Last Answer : d) Modem

Digital computers are more widely used as compared to analog computers, because they are

Last Answer : Digital computers are more widely used as compared to analog computers, because they are useful over wider ranges of problem types.

Is there some analog way to measure light without blocking it?

Description : Is there some analog way to measure light without blocking it?

Last Answer : Do you need to measure it, or just filter it? Many substances will filter light with certain properties (generally, its wavelength or polarity). You could also measure by blocking some portion of the light, and/or measure and reproduce what you measure.

Which of the listed statements is correct when using an analog multimeter as an ohmmeter? A. The pointer should be adjusted to zero each time a new resistance range is selected. B. The pointer will move to infinity when the meter is not in use. C. Ohmmeters are not sufficiently sized to measure conductor insulation resistance. D. All of the above.

Description : Which of the listed statements is correct when using an analog multimeter as an ohmmeter? A. The pointer should be adjusted to zero each time a new resistance range is selected. B. The ... C. Ohmmeters are not sufficiently sized to measure conductor insulation resistance. D. All of the above.

Last Answer : Answer: D

Data Acquisition system are used to measure and record analog signal in different ways i.e. : -

Description : Data Acquisition system are used to measure and record analog signal in different ways i.e. : -  a) Signals which originates from direct measurement of electrical quantities b) Signals which originate from the ... which oscillates in simple harmonic motion and dies out slowly. d) Both (a) and (b)

Last Answer : Data Acquisition system are used to measure and record analog signal in different ways i.e. : - d) Both (a) and (b) Signals which originates from direct measurement of electrical quantities and Signals which originate from the use of transducer. 

State why a well-designed soldering iron is self-regulating

Description : State why a well-designed soldering iron is self-regulating

Last Answer : The resistance of its heating element increases with rising temperature, thus limiting the current flow.

What happens to reflected energy that enters a directional coupler that is designed to sample incident energy?

Description : What happens to reflected energy that enters a directional coupler that is designed to sample incident energy?

Last Answer : . The reflected energy adds at the absorbent material and is absorbed.

in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Description : in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Last Answer : The wavefront portions add.

When will a synchro generate more heat than it is designed to handle?

Description : When will a synchro generate more heat than it is designed to handle?

Last Answer : Synchros have one primary winding that can be turned through 360º and three secondary windings spaced 120º apart.

In a properly designed servo system that has an oscillating input (order), what should be the response of the load?

Description : In a properly designed servo system that has an oscillating input (order), what should be the response of the load?

Last Answer : It should oscillate.

What is the air control panel designed to control?

Description : What is the air control panel designed to control?

Last Answer : Pressure.

Which type of optical source usually lacks reflective facets and in some cases are designed to suppress reflections back into the active region?

Description : Which type of optical source usually lacks reflective facets and in some cases are designed to suppress reflections back into the active region?

Last Answer : LED.

For what purposes is the SNAP II system designed?

Description : For what purposes is the SNAP II system designed?

Last Answer : To support shipboard and intermediate level maintenance, supply, financial, and administrative functions.

What type of applications were most third generation computer systems designed to accomplish?

Description : What type of applications were most third generation computer systems designed to accomplish?

Last Answer : Both scientific and business data processing applications.

A general-purpose computer is designed for what purpose?

Description : A general-purpose computer is designed for what purpose?

Last Answer : To perform a wide variety of functions and operations.

A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Description : A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Last Answer : Special-purpose.

A spectrum analyzer is designed to display what signal characteristic?

Description : A spectrum analyzer is designed to display what signal characteristic?

Last Answer : Amplitude versus frequency (the frequency domain of the signals).

What types of modulation are shipboard receive-only equipment designed to receive?

Description : What types of modulation are shipboard receive-only equipment designed to receive?

Last Answer : Fm or psk.

Vacuum tubes are designed to operate in what portion of the Ep - Ip

Description : Vacuum tubes are designed to operate in what portion of the Ep - Ip

Last Answer : The linear portion.

Flat panel displays are designed to reduce what problem of a crt display?

Description : Flat panel displays are designed to reduce what problem of a crt display?

Last Answer : Reduce the depth of the crt display caused by the length of the tube.

What special requirement is the pulse counting accelerometer designed for?

Description : What special requirement is the pulse counting accelerometer designed for?

Last Answer : When digital data is required from an accelerometer.

Lap windings are used in generators designed for what type of application?

Description : Lap windings are used in generators designed for what type of application?

Last Answer : Higher load currents are possible

A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

What is the primary cause of broadside arrays losing efficiency when not operating at their designed frequency?

Description : What is the primary cause of broadside arrays losing efficiency when not operating at their designed frequency?

Last Answer : Lower radiation resistance.