Description : The number of modes propagated in a multimode fiber depends on core size and numerical aperture (NA). If the core size and the NA decrease, will the number of modes propagated increase or decrease?
Last Answer : Decrease.
Description : Numerical aperture is expressed as the a) NA = sin θa b) NA = cos θa c) NA = tan θa d) NA = sec θa
Last Answer : a) NA = sin θa
Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is a. 017 b. 0.26 c. 0.50 d. 0.75
Last Answer : b. 0.26
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection a. Mode b. Grade c. Numerical Aperture d. Dispersion
Last Answer : a. Mode
Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector
Last Answer : A. using a monochromatic light source
Description : It is a graphical representation of the magnitude of the refractive index across the fiber. ∙ A. mode ∙ B. index profile ∙ C. numerical aperture ∙ D. refractive index
Last Answer : B. index profile
Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.
Last Answer : The amount of external light the fiber will accept is greater.
Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75
Last Answer : ∙ b. 0.26
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion
Description : It is the figure of merit used to measure the magnitude of the acceptance angle. ∙ A. acceptance angle ∙ B. numerical aperture ∙ C. index profile
Last Answer : B. numerical aperture
Description : The refractive index is 2.33 and the critical angle is 350. Find the numerical aperture. a) 2 b) 1.9 c) 2.33 d) 12
Last Answer : b) 1.9
Description : The numerical aperture of a material with acceptance angle of 60 degree in water will be a) 1.15 b) 2.15 c) 5.21 d) 1.52
Last Answer : a) 1.15
Description : Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90
Last Answer : c) 45
Description : The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86
Last Answer : d) 1.86
Description : Magnification of compound microscope is not connected with (a) numerical aperture (b) focal length of objective (c) focal length of eye piece (d) tube length.
Last Answer : (a) numerical aperture
Description : Electron microscope has a high resolution power. This is due to (a) electromagnetic lenses (b) very low wavelength of electron beam (c) low wavelength of light source used (d) high numerical aperture of glass lenses used.
Last Answer : (b) very low wavelength of electron beam
Description : The numerical aperture is the ____________________ of the angle of
Last Answer : sine
Description : The effect of a large magnitude of the numerical aperture.
Last Answer : The amount of external light the fiber will accept is greater
Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture
Last Answer : b. Modes
Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture
Description : What fiber property directly affects splice loss in fusion splicing?
Last Answer : The angles and quality of the two fiber-end faces.
Description : Meridional rays are classified as either bound or unbound rays. Bound rays propagate through the fiber according to what property?
Last Answer : Total internal reflection.
Description : What is the basic optical-material property relevant to optical fiber light transmission?
Last Answer : The index of refraction.
Description : Multimode step-index fibers have relatively large core diameters and large numerical apertures. These provide what benefit?
Last Answer : Make it easier to couple light from a light-emitting diode (LED) into the fiber.
Description : What electrical property does an ammeter measure?
Last Answer : Current.
Description : Printer resolution is a numerical measure of print quality that is measured in _______ A. Pages Per Minute (PPM) B. Lines Per Minute (LPM) C. Characters Per Second (CPS) D. Dots Per Inch (DPI)
Last Answer : D. Dots Per Inch (DPI)
Description : Subject orientation A . The science of collecting, organizing, and applying numerical facts B. Measure of the probability that a certain hypothesis is incorrect given certain observations. C. ... specially built around all the existing applications of the operational data D . None of these
Last Answer : C. One of the defining aspects of a data warehouse, which is specially built around all the existing applications of the operational data
Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.
Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.
Description : Arrange the following order of the property indicated: (a). F, Cl, Br and I (negative electron gain enthalpy) (b). Mg, Al, Si and Na (ionization enthalpy) (c). C, N, O and F (second ionization enthalpy)
Last Answer : Ans. (a). I
Description : The following is true of propafenone except: A. It is a weak Na+ channel blocker B. It markedly delays recovery of myocardial Na+ channels C. It has additional β-adrenergic blocking property D. It slows anterograde as well as retrograde conduction in the WPW bypass tract
Last Answer : A. It is a weak Na+ channel blocker
Description : Which type of optical splitter (Y-coupler or T-coupler) splits only a small amount of power from the input fiber to one of the output fibers?
Last Answer : T-coupler
Description : What is the difference between passive and active fiber optic couplers?
Last Answer : Passive couplers redistribute optical signals without optical-to electrical conversion.
Description : The Navy classifies fiber optic connectors in what two ways?
Last Answer : Light-duty and heavy-duty connectors.
Description : Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?
Last Answer : Butt-jointed connectors.
Description : Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?
Description : Fiber optic connectors can reduce system performance by increasing what two types of noise?
Last Answer : Modal and reflection.
Description : Does coupling loss from refractive index profile difference result when the receiving fiber has a larger profile parameter
Last Answer : Fiber alignment.
Description : List six types of fiber mismatches.
Last Answer : Core diameter mismatch, cladding diameter mismatch, core ellipticity, core and cladding concentricity differences, NA mismatch, and refractive index profile differences.
Description : Using a standard microscope to inspect a fiber-end face, you observe that all parts of the fiberend face are in focus at the same time. Is the fiber-end face flat, concave, or convex?
Last Answer : Flat.
Description : What is the basic fiber cleaving technique for preparing optical fibers for coupling?
Last Answer : Score-and-break.
Description : Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?
Last Answer : Be flat, smooth, and perpendicular to the fiber axis.
Description : How does index matching gel affect the amount of coupling loss caused by (a) fiber separation, (b) lateral misalignment, and (c) angular misalignment?
Last Answer : (a) Reduces coupling loss, (b) does not change coupling loss, and (c) increases coupling loss
Description : List the three basic errors that occur during fiber alignment.
Last Answer : Fiber separation (longitudinal misalignment), lateral misalignment, and angular misalignment.
Description : What connection properties result in fiber optic connector coupling loss?
Last Answer : Poor fiber alignment and end preparation, fiber mismatches, and Fresnel reflection.
Description : What is a short discharge of electric current that prepares the fiber ends for fusion called?
Last Answer : Prefusion
Description : Fiber splicing is divided into two broad categories that describe the techniques used for fiber splicing. What are they?
Last Answer : Mechanical and fusion splicing.
Description : Define a fiber optic splice.
Last Answer : A permanent fiber joint whose purpose is to establish an optical connection between two individual optical fibers.
Description : Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?
Last Answer : SLEDs and ELEDs.
Description : Reduction of Fresnel reflection is possible by reducing the step change in the refractive index at the fiber interface. What material reduces the step change in refractive index at a fiber interface?
Last Answer : Index matching gel.
Description : In fiber-to-fiber connections, Fresnel reflection is one source of coupling losses. Light is reflected back into the source fiber and is lost. What causes Fresnel reflection?
Last Answer : A step change in refractive index that occurs at fiber joints, caused by fiber separation.