What area of an ohmmeter scale should be used when measuring circuits?

What area of an ohmmeter scale should be used when  measuring circuits?
by

1 Answer

Answer :

The middle of the scale.
by

Related questions

Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointers to mid-scale B. change the meter's batteries C. center the meter's pointer at infinity D. short the test leads and calibrate the meter

Description : Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointers to mid-scale B. change the meter's batteries C. center the meter's pointer at infinity D. short the test leads and calibrate the meter

Last Answer : Answer: D

Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointer to mid-scale B. short the test leads and calibrate the meter reading to 'zero' C. change the meter's batteries D. center the meter's pointer at infinity

Description : Before measuring an unknown resistance with an ohmmeter, you should _____________. A. adjust the meter's pointer to mid-scale B. short the test leads and calibrate the meter reading to 'zero' C. change the meter's batteries D. center the meter's pointer at infinity

Last Answer : Answer: B

. A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : . A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Description : A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Last Answer : d) AVO Meter

When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

What are two transistor tests that can be done with an ohmmeter?

Description : What are two transistor tests that can be done with an ohmmeter?

Last Answer : Gain and junction resistance.

What must be done to a circuit before you can use an ohmmeter for testing?

Description : What must be done to a circuit before you can use an ohmmeter for testing?

Last Answer : It must be de-energized.

When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Description : When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Last Answer : The diode is open or has a high-forward resistance.

When testing an SCR with an ohmmeter, the SCR will conduct if what two elements are shorted together?

Description : When testing an SCR with an ohmmeter, the SCR will conduct if what two elements are shorted together?

Last Answer : Gate and anode.

When you are using an ohmmeter to test a transistor, what range settings should be avoided?

Description : When you are using an ohmmeter to test a transistor, what range settings should be avoided?

Last Answer : Any range setting that produces a current flow through the transistor that exceeds 1 milliamp (usually R x 1 range)

Before you connect a VOM in a circuit for an ohmmeter reading, in what condition must the circuit be?

Description : Before you connect a VOM in a circuit for an ohmmeter reading, in what condition must the circuit be?

Last Answer : De-energized

How could you check a 1/500-ampere fuse with an ohmmeter?

Description : How could you check a 1/500-ampere fuse with an ohmmeter?

Last Answer : Use a resistor in series with the fuse when you check it with the ohmmeter.

You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Description : You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Last Answer : The ohmmeter causes more than 1/500 ampere through the fuse when you check the fuse, thus it opens the fuse.

You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Description : You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Last Answer : Put it back in the circuit. A good fuse will have zero ohms of resistance.

What is used to provide the ohmmeter with several ranges?

Description : What is used to provide the ohmmeter with several ranges?

Last Answer : An ohmmeter has several internal range resistors and a switch or a series of jacks to select the proper range.

How is a series-type ohmmeter connected to the circuit being measured?

Description : How is a series-type ohmmeter connected to the circuit being measured?

Last Answer : The ohmmeter is connected in series with the resistance to be measured.

What other measurement can an ohmmeter make?

Description : What other measurement can an ohmmeter make?

Last Answer : Circuit continuity.

What electrical quantity is measured by an ohmmeter?

Description : What electrical quantity is measured by an ohmmeter?

Last Answer : Resistance.

The R x 100 resistance selection on an ohmmeter has what amount of resistance compared to the R x 10 selection?

Description : The R x 100 resistance selection on an ohmmeter has what amount of resistance compared to the R x 10 selection?

Last Answer : 1/10.

The R x 100 resistance selection on an ohmmeter has what amount of resistance compared to the R x 10 selection?

Description : The R x 100 resistance selection on an ohmmeter has what amount of resistance compared to the R x 10 selection?

Last Answer : 1/10.

Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less than normal. B. The reading is practically zero and remains there. C. The capacitor shows no charging action, but indicates a very high resistance. D. The pointer moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Description : Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less ... moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Last Answer : Answer: B

Prior to using an analog type ohmmeter, the leads are purposely shorted together. Which of the following actions should be taken if, when adjusting to 'zero' ohms, the indicating needle can not be returned to 'zero' on the scale? A. The lead clips should be replaced. B. The batteries should be replaced. C. The test reading should be added to each final reading. D. The test reading should be subtracted from each final reading.

Description : Prior to using an analog type ohmmeter, the leads are purposely shorted together. Which of the following actions should be taken if, when adjusting to 'zero' ohms, the indicating needle can not be ... be added to each final reading. D. The test reading should be subtracted from each final reading.

Last Answer : Answer: B

A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value for the capacitor B. first swing quickly to 'zero', then gradually move up the scale as the capacitor charges C. immediately deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Description : A capacitor can be tested using a megohmmeter or an ohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance ... deflect to and remain at zero D. immediately swing to a high reading and then gradually decrease

Last Answer : Answer: C

On a simple ohmmeter, the 0 ohm(s0 mark is located __ of the scale

Description : On a simple ohmmeter, the 0 ohm(s0 mark is located __ of the scale

Last Answer : at far right

A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be

Last Answer : A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be Hyperbolic.

Draw a potentiometer temp. Measuring circuits and explain its?

Description : Draw a potentiometer temp. Measuring circuits and explain its?  

Last Answer : OPERATION : The input to the instrument is a measurement of some in the processes using a sensing element ( such as thermocouple ) or a device to produce direct voltage, which is the voltage (signal) ... to zero results ( null point ) the balancing ( servo motor is be longer driven )   

Protective relays are devices that detect abnormal conditions in electrical circuits by measuring (a) current during abnormal condition (b) voltage during abnormal condition (c) constantly the electrical quantities which differ during normal and abnormal conditions (d) none of the above

Description : Protective relays are devices that detect abnormal conditions in electrical circuits by measuring (a) current during abnormal condition (b) voltage during abnormal condition (c) constantly the electrical quantities which differ during normal and abnormal conditions (d) none of the above

Last Answer : (c) constantly the electrical quantities which differ during normal and abnormal conditions

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

Protective relays are devices that detect abnormal conditions in electrical circuits by measuring?

Last Answer : Protective relays are devices that detect abnormal conditions in electrical circuits by measuring constantly the electrical quantities which differ during normal and abnormal conditions.

Name a common application of counting circuits.

Description : Name a common application of counting circuits.

Last Answer : Frequency counters or frequency dividers.

How many tuned parallel LC circuits are shown in this schematic?

Description : How many tuned parallel LC circuits are shown in this schematic?

Last Answer : Four.

What is the major factor that limits the high-frequency response of an amplifier circuits?

Description : What is the major factor that limits the high-frequency response of an amplifier circuits?

Last Answer : The capacitance of the circuit.

List the circuits that all oscilloscopes have in common.

Description : List the circuits that all oscilloscopes have in common.

Last Answer : A CRT, a group of control circuits, power supply, sweep circuitry, and deflection circuitry.

Circuits that can be interconnected without additional circuitry are known as ____________ circuits.

Description : Circuits that can be interconnected without additional circuitry are known as ____________ circuits.

Last Answer : Compatible.

Circuits which maintain constant voltage or current outputs are called dc voltage or dc current ___.

Description : Circuits which maintain constant voltage or current outputs are called dc voltage or dc current ___.

Last Answer : Regulators.

Why is the use of large value capacitors in filter circuits discouraged?

Description : Why is the use of large value capacitors in filter circuits discouraged?

Last Answer : Expense

Which of the basic timing circuits produces sharp trigger pulses directly?

Description : Which of the basic timing circuits produces sharp trigger pulses directly?

Last Answer : Blocking oscillators.

What basic circuits meet the requirements of an externally synchronized master oscillator?

Description : What basic circuits meet the requirements of an externally synchronized master oscillator?

Last Answer : Sine-wave oscillator, single-swing blocking oscillator, and master trigger (astable) multivibrator.

The actions of the tr and atr circuits depend on the impedance characteristics of what length of transmission line?

Description : The actions of the tr and atr circuits depend on the impedance characteristics of what length of transmission line?

Last Answer : Quarter-wavelength section

Which of the basic timing circuits produces sharp trigger pulses directly?

Description : Which of the basic timing circuits produces sharp trigger pulses directly?

Last Answer : Blocking oscillators.

What basic circuits meet the requirements of an externally synchronized master oscillator?

Description : What basic circuits meet the requirements of an externally synchronized master oscillator?

Last Answer : Sine-wave oscillator, single-swing blocking oscillator, and master trigger (astable) multivibrator.

What is the purpose of the majority of circuits in a radar system?

Description : What is the purpose of the majority of circuits in a radar system?

Last Answer : Timing and control.

Why is the use of large value capacitors in filter circuits discouraged?

Description : Why is the use of large value capacitors in filter circuits discouraged?

Last Answer : Expense

What do the smaller circuits in third generation computers allow for?

Description : What do the smaller circuits in third generation computers allow for?

Last Answer : Faster internal processing speeds.

What is the primary advantage of hybrid circuits?

Description : What is the primary advantage of hybrid circuits?

Last Answer : Circuit flexibility

When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Description : When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Last Answer : Differences in performance of tubes of the same type