What is the formula for determining total reactance in a series circuit where the values of XC and XL are known?

What is the formula for determining total reactance in a  series circuit where the values of XC and XL are known?
by

1 Answer

Answer :

X = XL – XC or X = XC - XL
by

Related questions

What is the value of Z in a series ac circuit where XL = 6ohms, XC = 3ohms, and R = 4ohms?

Description : What is the value of Z in a series ac circuit where XL = 6ohms, XC = 3ohms, and R = 4ohms?

Last Answer : X = XL – XC or X = XC - XL

The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Description : The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Last Answer : Answer: C

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

XL and XC in parallel

Description : XL and XC in parallel

Last Answer : https://youtu.be/fCN95EiEWDI

When XL is equal to Xc then:

Description : When XL is equal to Xc then:  (1) Z=R (2) Z = Xc (3) Z = XL (4) None of these

Last Answer : When XL is equal to Xc then: Z=R.

In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Description : In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Last Answer : Nonresonant (circuit is either above or below resonance)

The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Description : The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Last Answer : Answer: C

How are the voltage drop across R and XL related in series RL circuit?

Description : How are the voltage drop across R and XL related in series RL circuit?

Last Answer : Voltage drop across a circuit is IZ, where I is current and Z isimpedance. In other words IZ = IR + jIX, where R is resistance andX is inductance

If you increase the value of the capacitor, will the XC increase or decrease? Why?

Description : If you increase the value of the capacitor, will the XC increase or decrease? Why?

Last Answer : It will decrease. Capacitance is inversely proportional to:

If you increase the value of the capacitor will the XC increase or decrease? Why?

Description : If you increase the value of the capacitor will the XC increase or decrease? Why?

Last Answer : Decrease-Capacitance is inversely proportional to XC.

What happens to the value of XC as capacitance increases

Description : What happens to the value of XC as capacitance increases

Last Answer : XC decreases.

What happens to the valuce of XC as freqeuncy decreases?

Description : What happens to the valuce of XC as freqeuncy decreases?

Last Answer : XC increases.

What happens to the value of XL as inductance decreases?

Description : What happens to the value of XL as inductance decreases?

Last Answer : XL decreases.

What happens to the value of XL as frequency increases?

Description : What happens to the value of XL as frequency increases?

Last Answer : XL increases.

Refer to figure 3-55(A). If the following resistors were replaced with the values indicated: R1 = 900Ω, R3 = 1kΩ, what is the total power in the circuit? What is ER2?

Description : Refer to figure 3-55(A). If the following resistors were replaced with the values indicated: R1 = 900Ω, R3 = 1kΩ, what is the total power in the circuit? What is ER2?

Last Answer : PT = 60 W, ER2 = 10 V.

The total power in both series and parallel circuits is computed with the formula: PT = P1 + P2 + P3 +...Pn. Why can this formula be used for both series and parallel circuits?

Description : The total power in both series and parallel circuits is computed with the formula: PT = P1 + P2 + P3 +...Pn. Why can this formula be used for both series and parallel circuits?

Last Answer : In both cases all the power used in the circuit must come from the source.

A convenient method of determining antenna impedance. A. Stub matching B. Reactance circle C. Smith chart D. Trial and error

Description : A convenient method of determining antenna impedance. A. Stub matching B. Reactance circle C. Smith chart D. Trial and error

Last Answer : C. Smith chart

In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Description : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Last Answer : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a ... the series combination of `L` and `C`will be:

An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Description : An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Last Answer : Answer: B

An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Description : An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Last Answer : Answer: A

What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Description : What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Last Answer : A. A parallel LC circuit

In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Description : Can a parallel LC circuit be used as the frequency determining network for an rf amplifier?

Last Answer : Yes.

What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance decreases, total current increases (b) Total resistance decreases, total current increases

What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance increases, total current decreases (b) Total resistance becomes infinite, total current is equal to zero

A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Description : A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Last Answer : (a) 330 volts. (b) E1 = 150 volts. E2 = 180 volts. (c) 1.98 kilowatts. (d) P1 = 900 watts. P2 = 1.08 kilowatts component but in a parallel circuit total current divides among the available paths.

There is a relationship between total current and current through the individual components in a circuit. What is this relationship in a series circuit and a parallel circuit?

Description : There is a relationship between total current and current through the individual components in a circuit. What is this relationship in a series circuit and a parallel circuit?

Last Answer : The source voltage would have to be increased to 640 volts

A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Description : A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Last Answer : (a) 160 ohms. (b) 480 ohms

Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. C. Inductive reactance varies directly with the frequency and the inductance. D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Description : Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Last Answer : Answer: B

What is the formula for determining the power in a circuit ?

Description : What is the formula for determining the power in a circuit ?

Last Answer : The formula for circuit power is P = V * I watt here , P is power V is voltage I is current.

Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Last Answer : D. loading coil

An iris placed along the "b" dimension wall produces what kind of reactance?

Description : An iris placed along the "b" dimension wall produces what kind of reactance?

Last Answer : Inductive.

What happens to inductive reactance as frequency increases?

Description : What happens to inductive reactance as frequency increases?

Last Answer : It increases.

What happens to capacitive reactance as frequency increases?

Description : What happens to capacitive reactance as frequency increases?

Last Answer : It decreases.

What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Description : What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Last Answer : Lower.

Which is more accurate, the bridge- or reactance-type meter?

Description : Which is more accurate, the bridge- or reactance-type meter?

Last Answer : Bridge type.

What characteristic of a transistor is varied in a semiconductor-reactance modulator?

Description : What characteristic of a transistor is varied in a semiconductor-reactance modulator?

Last Answer : Collector-to-emitter capacitance.

How does the reactance-tube modulator impress intelligence onto an rf carrier?

Description : How does the reactance-tube modulator impress intelligence onto an rf carrier?

Last Answer : By changing the reactance of an oscillator circuit in consonance with the modulating voltage.

With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Description : With the usual meanings of letters, the equation V = 400 I (D10²/4) is used for determining the velocity of ground water flow in metres per day. It is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen's formula

Last Answer : Answer: Option B

The equation V = (1000 ID10²/60) × (1.8T + 42) which is used for determining the velocity of ground water flow in metres per day is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen formula

Description : The equation V = (1000 ID10²/60) × (1.8T + 42) which is used for determining the velocity of ground water flow in metres per day is known as (A) Meinzer's formula (B) Slichter's formula (C) Darcy's formula (D) Hazen formula

Last Answer : Answer: Option D

Capacitive reactance formula

Description : Capacitive reactance

Last Answer : Capacitive reactance formula

What is the resale value of a Volvo XC?

Description : What is the resale value of a Volvo XC?

Last Answer : Well, depending on the car's condition, what one would usually now referr to as 'carfacts' as I believe the commercials go, if you are looking to offload it as scrap or not, then I would need to ... am seeing values from as little as $4,000 to as much as $20,000, depending on year and condition.

Of contempts of the lawful authority of public servants defined in___ of IPC a) Chapter IX b) Chapter Xc) Chapter XII d) Chapter XIII

Description : Of contempts of the lawful authority of public servants defined in___ of IPC a) Chapter IX b) Chapter X c) Chapter XII d) Chapter XIII 

Last Answer : b) Chapter X

ABCD is a parallelogram with diagonal AC If a line XZ is drawn such that XZ ∥ AB, then BX/XC = ? (a) (AY/AC) (b) DZ/AZ (c) AZ/ZD (d) AC/AY Answer: (c) AZ/ZD 13. In the given figure, value of x (in cm) is (a) 5cm (b) 3.6 cm (c) 3.2 cm (d) 10 cm

Description : ABCD is a parallelogram with diagonal AC If a line XZ is drawn such that XZ ∥ AB, then BX/XC = ? (a) (AY/AC) (b) DZ/AZ (c) AZ/ZD (d) AC/AY Answer: (c) AZ/ZD 13. In the given figure, value of x (in cm) is (a) 5cm (b) 3.6 cm (c) 3.2 cm (d) 10 cm

Last Answer : (a) 5cm

If the critical shear stress of a channel is XC, then the average value of shear stress required to move the grain on the bank is (A) 0.5 XC (B) 0.75 TC (C) XC (D) 1.33 TC

Description : If the critical shear stress of a channel is XC, then the average value of shear stress required to move the grain on the bank is (A) 0.5 XC (B) 0.75 TC (C) XC (D) 1.33 TC

Last Answer : Answer: Option B

In a series wound motor, the current passing through the field windings is also passing through the _____________. A. armature B. shunt field C. reactance comparator D. laminations

Description : In a series wound motor, the current passing through the field windings is also passing through the _____________. A. armature B. shunt field C. reactance comparator D. laminations

Last Answer : Answer: A

Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Description : Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Last Answer : (a) compensate for line inductive reactance

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

How can the frequency be changed in the frequency determining network?

Description : How can the frequency be changed in the frequency determining network?

Last Answer : By changing the value.