Data Acquisition system are used to measure and record analog signal in different ways i.e. : -

Data Acquisition system are used to measure and record analog signal in different ways i.e. : - 

a) Signals which originates from direct measurement of electrical quantities b) Signals which originate from the use of transducer. c) Signals which oscillates in simple harmonic motion and dies out slowly. d) Both (a) and (b)
by

1 Answer

Answer :

Data Acquisition system are used to measure and record analog signal in different ways i.e. : - d) Both (a) and (b)


Signals which originates from direct measurement of electrical quantities and Signals which originate from the use of transducer. 

by

Related questions

The best and efficient damping in Analog instruments is : -

Description : The best and efficient damping in Analog instruments is : - a) Air Friction damping b) Fluid Friction damping c) Eddy Current damping d) None of the above

Last Answer : The best and efficient damping in Analog instruments is : - Eddy Current damping

A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a...

Description : A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a relatively fixed conversion time independent of the applied voltage. The A/D ... Successive Approximation Converter .b) Digital Ramp Converter c) Digital Slope Converter d) All the above

Last Answer : A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a relatively fixed conversion time independent of the applied voltage. The A/D converter is : -  Successive Approximation Converter 

Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate software is required for processing the data (D) Computer is capable of processing digital as well as analog signals

Description : Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate ... for processing the data (D) Computer is capable of processing digital as well as analog signals

Last Answer : Answer: A

An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

In signal generators -

Description : In signal generators - a) energy is created b) energy is generated c) energy is converted from a simple DC source into ac energy at some specific frequency d) all the above

Last Answer : In signal generators - energy is converted from a simple DC source into ac energy at some specific frequency

The desirable characteristics of a signal source are : -

Description : The desirable characteristics of a signal source are : - a) the frequency of the signal should be well known and stable b) the amplitude of the signal source should be controllable from very small to relatively large value c) The output signal should be free from distortion d) all the above

Last Answer : The desirable characteristics of a signal source are : - a) the frequency of the signal should be well known and stable b) the amplitude of the signal source should be controllable from very small to relatively large value c) The output signal should be free from distortion d) all the above

The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -

Description : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -  a) 2 b) 5 c) 3 d) 4

Last Answer : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - 5

What non-financial measure of marketing is important to track?  CEO performance  Number of new hires in marketing  Number of impressions  New customer acquisition

Description : What non-financial measure of marketing is important to track?  CEO performance  Number of new hires in marketing  Number of impressions  New customer acquisition

Last Answer :  Number of impressions

Thermocouple is used to measure : -

Description : Thermocouple is used to measure : - a) AC b) DC c) Both d) None

Last Answer : Thermocouple is used to measure : - a) AC b) DC c) Both d) None

Which of the following statements concerning learning is the least acceptable? Options: A) Learning involves the acquisition of habits, knowledge and attitudes B) Learning involves new ways of overcoming obstacles and attaining goals C) Learning involves the weakening of the resistance to the passage of a neutral impulse D) Learning represents progressive change in behaviour

Description : Which of the following statements concerning learning is the least acceptable? Options: A) Learning involves the acquisition of habits, knowledge and attitudes B) Learning involves new ways of ... resistance to the passage of a neutral impulse D) Learning represents progressive change in behaviour 

Last Answer : D) Learning represents progressive change in behaviour 

Which of the following statement is correct ? (A) Modem is a software (B) Modem helps in stabilizing the voltage (C) Modem is the operating system (D) Modem converts the analog signal into digital signal and vice-versa

Description : Which of the following statement is correct ? (A) Modem is a software (B) Modem helps in stabilizing the voltage (C) Modem is the operating system (D) Modem converts the analog signal into digital signal and vice-versa

Last Answer : (D) Modem converts the analog signal into digital signal and vice-versa

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Description : The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Last Answer : d) Modem

What exactly is a data acquisition system?

Description : What exactly is a data acquisition system?

Last Answer : Abbreviated as DAS, this refers to the assembling of data so that it can be processed by your computer system, The data has to be converted from analog into digital format. It involves sensors and circuitry, along with computer programming languages.

Draw and describe general Data acquisition system .

Description : Draw and describe general Data acquisition system . 

Last Answer : Data acquisition is the process of sampling signals that measure real world physical conditions and converting the resulting samples into digital numeric values that can be manipulated ... are usually controlled by software programs developed using various general purpose programming languages

Write objective of Data acquisition system.

Description : Write objective of Data acquisition system.

Last Answer : Objectives of Data Acquisition System: It must monitor the complete plant operation to maintain online optimum and safe operations. It must provide an effective human communication system and be able to identify problem ... data. It must be reliable, and not have a down time greater than 0.1%.

Draw block diagram of Data Acquisition System (DAS). Write function of each block.

Description : Draw block diagram of Data Acquisition System (DAS). Write function of each block.

Last Answer : Data Acquisition System(DAS) : - (Definition) - The function of DAS is to collect the input data efficiently, accurately, simultaneously to store and display the data. It consists of sensor or transducer ... - to output od DAS is provided in the form of display or plot or recoded in recorder.

State any four functions of data acquisition system.

Description : State any four functions of data acquisition system.

Last Answer : Functions of data acquisition system. 1. Handling of analog signals 2. Relates to the process of collecting the input data in digital form,as rapidly, accurately, completely and ... industry-standard computers providing a more powerful, flexible, and cost-effective measurement solution. 

What is Data Acquisition System (DAS) ?

Description : What is Data Acquisition System (DAS) ?

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

What is an analog signal in Arduino?

Description : What is an analog signal in Arduino?

Last Answer : An analog signal in Arduino is a signal that can have a range of values between 0V and 5V, representing a continuous range of values.

TCP helps in converting the digital signal to analog signal and vice_versa. -Technology

Description : TCP helps in converting the digital signal to analog signal and vice_versa. -Technology

Last Answer : False The process of converting digital signal into analog signal is called modulation and is done by a modem.

What kind of signal is analog signal ?

Description : What kind of signal is analog signal ?

Last Answer : Analog signal: The value of a signal (voltage , current , or frequency) that changes continuously with time and can have any meaning at any moment is called analog signal. This is often called ... as filters , amplifiers , modulators, etc. are used to process such signals. References : Bissoy.com

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Answer : Analog systems use alternating analog electrical signals. An uninterrupted electrical signal is called an analog signal. Heat , pressure , flow are examples of some of the constantly changing ... electric waves. Radio , tape recorder , analog computer are some examples of analog methods.

What is the difference between analog and digital signal ?

Last Answer : Digital and analog are basically a type of signal that is used to exchange information. In shortcut analog technology the information is converted into electric pulse of different wavelengths. ... for computing and electronic devices. . Cost: Analog technology is comparatively cheaper than digital.

A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Last Answer : Answer : A

Noise occurring in the presence of signal resulting from a mismatch between the exact value of an analog signal and the closet available quantizing step in a digital coder. A. Quantizing noise B. Thermal noise C. Impulse noise D. Crosstalk

Description : Noise occurring in the presence of signal resulting from a mismatch between the exact value of an analog signal and the closet available quantizing step in a digital coder. A. Quantizing noise B. Thermal noise C. Impulse noise D. Crosstalk

Last Answer : A. Quantizing noise

The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Description : The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Last Answer : D. Modem

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Description : ________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Last Answer : Analog-to-analog

_______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Description : _______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Last Answer : Digital-to-analog

The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Description : The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Last Answer : PCM

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal

Description : The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal

Last Answer : A. digital signal

The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Description : The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Last Answer : (A) 2fs

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

What is an analog signal?

Description : What is an analog signal?

Last Answer : A continuous signal that varies in a direct proportion to the instantaneous value of a physical

A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

The slope of the analog signal is greater than the delta modulator can maintain

Description : The slope of the analog signal is greater than the delta modulator can maintain

Last Answer : Slope overload

Differentiate analog and digital signal.

Description : Differentiate analog and digital signal.

Last Answer : Analog signals are defined for every value of time and they take on values in the continuous interval (a,b) where ‘a’ can be -∞ and ‘b’ can be ∞. Ex : x(t)=cos πt ; -∞

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error

Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error

Last Answer : b) Quantization error

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

The process of dividing an analog signal into a string of discrete outputs, each of constant amplitude, is called: (A) Strobing (B) Amplification (C) Conditioning (D) Quantization

Description : The process of dividing an analog signal into a string of discrete outputs, each of constant amplitude, is called: (A) Strobing (B) Amplification (C) Conditioning (D) Quantization

Last Answer : (D) Quantization

Analog signal

Description : Analog signal

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }