What are computers called that combine the functions of  both analog and digital computers?

1 Answer

Answer :

Hybrid computers.

Related questions

Description : What is the fundamental difference between analog and digital computers?

Last Answer : Digital computers deal with discrete quantities, while analog computers deal with continuous physical variables.

Description : Early analog computers were what type of devices?

Last Answer : Mechanical or electromechanical.

Description : What are analog computers designed to measure?

Last Answer : Continuous electrical or physical conditions.

Description : All analog computers are what type of computers?

Last Answer : Special-purpose.

Description : The Navy uses analog computers primarily for what purpose?

Last Answer : Gun fire control

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

Description : What are the computers called that performs calculations and comparisons usually in the binary numbering system? A) Analog Computers B) Digital Computers C) Hybrid Computers D) None of above

Last Answer : Answer : B

Description : The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Last Answer : d) Modem

Last Answer : : A combination of analog and digital computers - hybrid computers.

Description : Which of the following is not the classification of computers based on application? A) Electronic Computers B) Analog Computers C) Digital Computers D) Hybrid Computers

Last Answer : Answer : A

Description : Which of the following class of computers can process physical quantities such as speed? A) Analog Computers B) Digital Computers C) Hybrid Computers D) None of above

Last Answer : Answer : A

Description : The computer that can input analog signals and return result in digital form A) Analog Computers B) Digital Computers C) Hybrid Computers D) Mainframe Computers

Last Answer : Answer : C

Description : Which of the following is a class of computers based on model? A) Digital Computer B) Hybrid Computers C) Analog Computers D) AT Computers

Last Answer : Answer : D

Description : On which aspect the analog computers are better than digital? A) Speed B) Accuracy C) Reliability D) Automatic

Last Answer : Answer : B

Description : Which of the following statement is false? A) Mechanical analog computers have existed for thousands of years B) There are mechanical analog computers and electronic analog computers. C) All electronic computers are digital computers D) All of above are false

Last Answer : Answer : C

Description : A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers

Last Answer : (D) Analog & Digital computers

Description : Differentiate between analog and digital computers

Last Answer :  Analog computer:  Analog computers represent and process data by measuring quantities such as voltage and current to solve a problem.  They work on supply of continuous signals as input. ... memory capacity.  They are being used in business, education, health, supermarkets & banking. 

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

Last Answer : Digital computers are more widely used as compared to analog computers, because they are useful over wider ranges of problem types.

Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

Description : In first generation computers, internal processing functions were measured by what division of time?

Last Answer : Thousandths of a second (millisecond).

Description : Digital computers are generally used for what purposes?

Last Answer : Business and scientific data processing

Description : The computer that process both analog and digital is called A) Analog computer B) Digital computer C) Hybrid computer D) Mainframe computer

Last Answer : Answer : C

Description : The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Last Answer : Hybrid computer

Description : The signal which has infinitely many levels of intensity over a period of time is called ……… A. digital signal B. analog signal C. both a and b D. sound signal

Last Answer : A. digital signal

Description : The computer that process both analog and digital is called a. Analog computer b. Digital computer c. Hybrid computer d. Mainframe computer

Last Answer : c. Hybrid computer

Description : Having multiple perceptrons can actually solve the XOR problem satisfactorily: this is because each perceptron can partition off a linear part of the space itself, and they can then combine their results. ... have to be explicitly hand-coded d) False - just having a single perceptron is enough

Last Answer : c) True – perceptrons can do this but are unable to learn to do it – they have to be explicitly hand-coded

Description : According to the text, cost tradeoffs enable firms to A)resolve pricing conflicts among competitors. B)minimise risk during the test marketing of new products. C)reduce costs of all ... . D)resolve pricing conflicts within marketing channels. E)combine resources for greatest cost-effectiveness.

Last Answer : E)combine resources for greatest cost-effectiveness.

Description : Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Last Answer : LEDs require less complex circuitry than lasers.

Description : How is the accuracy of an analog computer restricted?

Last Answer : By the accuracy with which physical quantities can be sensed and displayed.

Description : Why has the transmission of video using analog techniques been very popular, especially for shorter distances?

Last Answer : Because cost can be minimized and complex multiplexing and timing equipment is unnecessary.

Description : What type of modulation do most analog fiber optic communications systems use?

Last Answer : Intensity modulation.

Description : What is an analog signal?

Last Answer : A continuous signal that varies in a direct proportion to the instantaneous value of a physical

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

Description : Do any clock have both digital and analog displays?

Last Answer : The Sangean Silver Atomic clock features both analog and digital displays.

Description : Signals can be analog or digital and a computer that processes the both type of signals is known as A) Analog computer B) Digital Computer C) Hybrid Computer D) Mainframe Computer

Last Answer : Answer : C

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : Resembles both a digital and analog computer

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : Resembles both a digital and analog computer

Description : Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Last Answer : both (a)and (b)

Description : 30) Which of the following signals are essential for Digital Marketing? A. Digital signals  B. Analog signals  C. Both A and B  D. None of the above

Last Answer : A. Digital signals

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : d. None of the above

Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above

Last Answer : c. Resembles both a digital and analog computer

Description : Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate ... for processing the data (D) Computer is capable of processing digital as well as analog signals

Last Answer : Answer: A

Description : The combination of computing, telecommunications and media in a digital atmosphere is referred to as: (A) online communication (B) integrated media (C) digital combine (D) convergence

Last Answer : Answer: D Technological convergence is the tendency that as technology changes, different technological systems sometimes evolve toward performing similar tasks. Digital convergence refers to the convergence of four industries ... , such as most smart ph ones can make phone calls and search the web.

Description : In process control terminology values which can change without distinct increments, such as temperature, pressure, or level are called ____________. A. binary values B. digital values C. bumpless values D. analog values

Last Answer : Answer: D

Description : What is a Digital-to-Analog Converter (DAC) in Arduino?

Last Answer : A Digital-to-Analog Converter (DAC) in Arduino is a component that converts digital signals into analog signals, such as to control the output voltage to a motor or a speaker.

Description : What is an Analog-to-Digital Converter (ADC) in Arduino?

Last Answer : An Analog-to-Digital Converter (ADC) in Arduino is a component that converts analog signals, such as temperature or light, into digital signals that can be processed by the microcontroller.

Description : What is the difference between analog and digital signals in Arduino?

Last Answer : Analog signals in Arduino are continuous and can have any value within a range, while digital signals are discrete and can only have two states: on or off.

Description : What's the difference between digital and analog audio?

Last Answer : Not exactly. I know the difference, but it's hard to explain. Ok imagine that you have a glass of water. The more water you put in, the more water there is in the glass. It could be around 200ml ... want to be traditional and keep that good old days feeling. Yes, there is magic in analogue too.