Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Why are LEDs preferred over laser diodes for low- and  moderate-frequency analog applications?
by

1 Answer

Answer :

LEDs require less complex circuitry than lasers.
by

Related questions

Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Description : Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Last Answer : SLEDs and ELEDs.

Specify the mechanism that SLDs lack that is required by laser diodes to achieve lasing.

Description : Specify the mechanism that SLDs lack that is required by laser diodes to achieve lasing.

Last Answer : SLDs have no built-in optical feedback mechanism.

LEDs operating at 850 nm provide sufficient optical power for short-distance, low-bandwidth multimode systems. List three conditions that prevent the use of LEDs in longer distance, higher bandwidth multimode systems.

Description : LEDs operating at 850 nm provide sufficient optical power for short-distance, low-bandwidth multimode systems. List three conditions that prevent the use of LEDs in longer distance, higher bandwidth multimode systems.

Last Answer : Multimode fiber dispersion, the relatively high fiber attenuation, and the LED's relatively low optical output power.

Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Description : Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Last Answer : Longer distances and higher bandwidths are possible because fiber material losses and dispersion are significantly reduced at the 1300-nm region.

Are the effects of temperature changes on LDs more or less significant than for LEDs?

Description : Are the effects of temperature changes on LDs more or less significant than for LEDs?

Last Answer : More.

Semiconductor LEDs emit incoherent light. Define incoherent light

Description : Semiconductor LEDs emit incoherent light. Define incoherent light

Last Answer : Light waves that lack a fixed-phase relationship

For laser diodes, the term ____________________ is used instead of bandwidth.

Description : For laser diodes, the term ____________________ is used instead of bandwidth.

Last Answer : linewidth

What type of logic family uses diodes in the input?

Description : What type of logic family uses diodes in the input?

Last Answer : DTL (diode transistor logic).

What resistance property is found in tunnel diodes but not in normal diodes?

Description : What resistance property is found in tunnel diodes but not in normal diodes?

Last Answer : Negative resistance.

What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Description : What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Last Answer : The amount of doping.

What causes the negative-resistance property of tunnel diodes?

Description : What causes the negative-resistance property of tunnel diodes?

Last Answer : The tunneling action

________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Description : ________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Last Answer : (a) Grease

Applications that work with cloud computing that have low margins and usually low risk are _____________ a) high touch b) low touch c) moderate touch d) all of the mentioned

Description : Applications that work with cloud computing that have low margins and usually low risk are _____________ a) high touch b) low touch c) moderate touch d) all of the mentioned

Last Answer : low touch

Applications that work with cloud computing that have low margins and usually low risk are _____________ a) high touch b) low touch c) moderate touch d) all of the mentioned

Description : Applications that work with cloud computing that have low margins and usually low risk are _____________ a) high touch b) low touch c) moderate touch d) all of the mentioned

Last Answer : low touch

Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Description : Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Last Answer : (D) All the above

The disc is usually the preferred system as it takes and can handle obstacles much easier. A. Less power. C) More power B. Moderate power. D) None of the above

Description : The disc is usually the preferred system as it takes and can handle obstacles much easier. A. Less power. C) More power B. Moderate power. D) None of the above

Last Answer : Less power

Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Last Answer : ∙ a. It has high losses

What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

Why would a laser diode be used in a low-data-rate digital application?

Description : Why would a laser diode be used in a low-data-rate digital application?

Last Answer : When extremely high transmitter output powers are required.

An example of an analog communication method is a. laser beam b. microwave c. voice grade telephone line d. all of the above

Description : An example of an analog communication method is a. laser beam b. microwave c. voice grade telephone line d. all of the above

Last Answer : all of the above

What type of bias is used where only moderate changes in ambient temperature are expected?

Description : What type of bias is used where only moderate changes in ambient temperature are expected?

Last Answer : Self-bias.

Why are drum-type armatures preferred over the Gramme ring armature in modern dc generators?

Description : Why are drum-type armatures preferred over the Gramme ring armature in modern dc generators?

Last Answer : Drum-type armatures are more efficient, because flux lines are cut by both sides of each coil.

Why is a multimeter preferred over separate meters?

Description : Why is a multimeter preferred over separate meters?

Last Answer : It is much more convenient to have one meter with several functions than several meters each with a single function.

Which light emitter is preferred for high-speed data in a fiber-optic system? ∙ A. incandescent ∙ B. LED ∙ C. neon ∙ D. laser

Description : Which light emitter is preferred for high-speed data in a fiber-optic system? ∙ A. incandescent ∙ B. LED ∙ C. neon ∙ D. laser

Last Answer : D. laser

Which light emitter is preferred for high speed data in a fiber-optic system ∙ a. Incandescent ∙ b. LED ∙ c. Neon ∙ d. Laser

Description : Which light emitter is preferred for high speed data in a fiber-optic system ∙ a. Incandescent ∙ b. LED ∙ c. Neon ∙ d. Laser

Last Answer : ∙ d. Laser

What type of source is typically used in low-data-rate digital applications?

Description : What type of source is typically used in low-data-rate digital applications?

Last Answer : LED.

Silicon transistors are preferred because: (a) High operating temperature (b) Low leakage current (c) Suited to high frequency circuits (d) All

Description : Silicon transistors are preferred because: (a) High operating temperature (b) Low leakage current (c) Suited to high frequency circuits (d) All

Last Answer : (d) All

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

How is the accuracy of an analog computer restricted?

Description : How is the accuracy of an analog computer restricted?

Last Answer : By the accuracy with which physical quantities can be sensed and displayed.

What is the fundamental difference between analog and digital computers?

Description : What is the fundamental difference between analog and digital computers?

Last Answer : Digital computers deal with discrete quantities, while analog computers deal with continuous physical variables.

What are computers called that combine the functions of both analog and digital computers?

Description : What are computers called that combine the functions of both analog and digital computers?

Last Answer : Hybrid computers.

Early analog computers were what type of devices?

Description : Early analog computers were what type of devices?

Last Answer : Mechanical or electromechanical.

What are analog computers designed to measure?

Description : What are analog computers designed to measure?

Last Answer : Continuous electrical or physical conditions.

All analog computers are what type of computers?

Description : All analog computers are what type of computers?

Last Answer : Special-purpose.

The Navy uses analog computers primarily for what purpose?

Description : The Navy uses analog computers primarily for what purpose?

Last Answer : Gun fire control

Why has the transmission of video using analog techniques been very popular, especially for shorter distances?

Description : Why has the transmission of video using analog techniques been very popular, especially for shorter distances?

Last Answer : Because cost can be minimized and complex multiplexing and timing equipment is unnecessary.

What type of modulation do most analog fiber optic communications systems use?

Description : What type of modulation do most analog fiber optic communications systems use?

Last Answer : Intensity modulation.

What is an analog signal?

Description : What is an analog signal?

Last Answer : A continuous signal that varies in a direct proportion to the instantaneous value of a physical

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

Which is true for Digital Computer: a) It is less accurate than analog computer b) It is used primarily in scientific applications c) It represents the decimal numbers through a string of binary digits d) None of The Above

Description : Which is true for Digital Computer: a) It is less accurate than analog computer b) It is used primarily in scientific applications c) It represents the decimal numbers through a string of binary digits d) None of The Above

Last Answer : b) It is used primarily in scientific applications

Prophylactic therapy of migraine: A. Is recommended in all cases B. Benefits upto 70% patients of moderate to severe migraine C. Needs to be continued lifelong without interruption D. Reduces the severity but increases the frequency of migraine attacks

Description : Prophylactic therapy of migraine: A. Is recommended in all cases B. Benefits upto 70% patients of moderate to severe migraine C. Needs to be continued lifelong without interruption D. Reduces the severity but increases the frequency of migraine attacks

Last Answer : B. Benefits upto 70% patients of moderate to severe migraine

Which kind of lightbulb is more energy efficient / cost efficient to operate for the same amount of light: those twisty spiral florecent bulbs or LEDs?

Description : Which kind of lightbulb is more energy efficient / cost efficient to operate for the same amount of light: those twisty spiral florecent bulbs or LEDs?

Last Answer : LEDs are more energy efficient and last longer

Will UV LEDs work like a UV tube?

Description : Will UV LEDs work like a UV tube?

Last Answer : answer:Ahh too late to edit, I can get 385-405nm ones for super cheap, but I can see some 380nm ones for 67 cents each, woud those be better? I'm having trouble finding what the real ... , found 100 5mm LEDs, 380-385nm wavelength, only 30 bucks! I wonder if that wavelength works well though.

Is my 1993 Miata Too old school for LED's?

Description : Is my 1993 Miata Too old school for LED's?

Last Answer : It maybe the bad contact in the socket is is causing it. check your grounds. The circuit for the brake/running lights maybe causing the cruise control to malfunction. I had a Mitsubishi that ... 4 way flashers on and have the cruise control work ! Think flashing lights equal to malfunction socket.

Why can't I mix and match LEDs wired in parallel?

Description : Why can't I mix and match LEDs wired in parallel?

Last Answer : answer:An LED is a diode. As such it has a forward voltage drop, i.e., when it's conducting current and shining light, there is a small voltage drop from one end to the other. (After all, with ... device & some would shine brighter than others. So it's still best to give each LED its own resistor.

Why can't I mix and match LEDs wired in parallel?

Description : Why can't I mix and match LEDs wired in parallel?

Last Answer : answer:An LED is a diode. As such it has a forward voltage drop, i.e., when it's conducting current and shining light, there is a small voltage drop from one end to the other. (After all, with ... device & some would shine brighter than others. So it's still best to give each LED its own resistor.

Has anyone bought loose LEDs?

Description : Has anyone bought loose LEDs?

Last Answer : What are you buying them for? I’ve bought them before, but I was buying them for an electronics kit type thing.

Where can I find the best deals on LEDs?

Description : Where can I find the best deals on LEDs?

Last Answer : Here!

Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

What is the lifetime of LEDs? a. 200,000 minutes b. 200,000 hours c. 150,000 minutes d. 150,000 hours

Description : What is the lifetime of LEDs? a. 200,000 minutes b. 200,000 hours c. 150,000 minutes d. 150,000 hours

Last Answer : b. 200,000 hours