Semiconductor LEDs emit incoherent light. Define incoherent light

Semiconductor LEDs emit incoherent light. Define  incoherent light
by

1 Answer

Answer :

Light waves that lack a fixed-phase relationship
by

Related questions

Which semiconductor sources (LD or LED) emit more focused light and are capable of launching sufficient optical power into both single mode and multimode fibers?

Description : Which semiconductor sources (LD or LED) emit more focused light and are capable of launching sufficient optical power into both single mode and multimode fibers?

Last Answer : LDs.

The semiconductor used for LEDs emitting in the visible range is

Description : The semiconductor used for LEDs emitting in the visible range is  (a) GaAs (b) GaAlAs (c) GalnAs (d) GaAsP

Last Answer : The semiconductor used for LEDs emitting in the visible range is GaAsP

Are the effects of temperature changes on LDs more or less significant than for LEDs?

Description : Are the effects of temperature changes on LDs more or less significant than for LEDs?

Last Answer : More.

Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Description : Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Last Answer : SLEDs and ELEDs.

Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Description : Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Last Answer : LEDs require less complex circuitry than lasers.

Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Description : Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Last Answer : Longer distances and higher bandwidths are possible because fiber material losses and dispersion are significantly reduced at the 1300-nm region.

LEDs operating at 850 nm provide sufficient optical power for short-distance, low-bandwidth multimode systems. List three conditions that prevent the use of LEDs in longer distance, higher bandwidth multimode systems.

Description : LEDs operating at 850 nm provide sufficient optical power for short-distance, low-bandwidth multimode systems. List three conditions that prevent the use of LEDs in longer distance, higher bandwidth multimode systems.

Last Answer : Multimode fiber dispersion, the relatively high fiber attenuation, and the LED's relatively low optical output power.

Why does Ozzy sound great in music videos, and incoherent in person?

Description : Why does Ozzy sound great in music videos, and incoherent in person?

Last Answer : Ozzy seems perfectly articulate.

How can a sheet of copper be made to emit electrons thermionically?

Description : How can a sheet of copper be made to emit electrons thermionically?

Last Answer : By heating it.

What semiconductor device produces electrical energy when exposed to light?

Description : What semiconductor device produces electrical energy when exposed to light?

Last Answer : Photovoltaic cell.

Which kind of lightbulb is more energy efficient / cost efficient to operate for the same amount of light: those twisty spiral florecent bulbs or LEDs?

Description : Which kind of lightbulb is more energy efficient / cost efficient to operate for the same amount of light: those twisty spiral florecent bulbs or LEDs?

Last Answer : LEDs are more energy efficient and last longer

Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Last Answer : ∙ a. It has high losses

What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Description : What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Last Answer : ∙ d. 940 nm

What is the name given to the semiconductor device that has three or more elements?

Description : What is the name given to the semiconductor device that has three or more elements?

Last Answer : Transistor

What does the letter "N" indicate in the semiconductor identification system?

Description : What does the letter "N" indicate in the semiconductor identification system?

Last Answer : A semiconductor.

What type of rectifier is constructed by sandwiching a section of semiconductor material between two metal plates?

Description : What type of rectifier is constructed by sandwiching a section of semiconductor material between two metal plates?

Last Answer : Metallic rectifier.

Conduction in which type of semiconductor material is similar to conduction in a copper wire?

Description : Conduction in which type of semiconductor material is similar to conduction in a copper wire?

Last Answer : N-type material.

What are the majority carriers in a P-type semiconductor?

Description : What are the majority carriers in a P-type semiconductor?

Last Answer : Holes.

What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Description : What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Last Answer : Point-contact.

What are the majority carriers in an N-type semiconductor?

Description : What are the majority carriers in an N-type semiconductor?

Last Answer : Electrons.

What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Description : What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Last Answer : Intrinsic.

Name the two types of current flow in a semiconductor.

Description : Name the two types of current flow in a semiconductor.

Last Answer : Electron flow and hole flow.

State one requirement of an electron tube, which does not exist for semiconductors, that makes the tube less efficient than the semiconductor.

Description : State one requirement of an electron tube, which does not exist for semiconductors, that makes the tube less efficient than the semiconductor.

Last Answer : The electron tube requires filament or heater voltage, whereas the semiconductor device does not; consequently, no power input is spent by the semiconductor for conduction.

What is lowest current at which stimulated emission exceeds spontaneous emission in a semiconductor laser called?

Description : What is lowest current at which stimulated emission exceeds spontaneous emission in a semiconductor laser called?

Last Answer : Threshold current.

What are the two most common semiconductor materials used in electronic and electro-optic devices?

Description : What are the two most common semiconductor materials used in electronic and electro-optic devices?

Last Answer : Silicon and gallium arsenide.

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

What characteristic of a gunn oscillator is inversely proportional to the transit time of the domain across the semiconductor?

Description : What characteristic of a gunn oscillator is inversely proportional to the transit time of the domain across the semiconductor?

Last Answer : The frequency.

The domain in a gallium-arsenide semiconductor has what type of electrical field when compared to the other regions across the body of a semiconductor?

Description : The domain in a gallium-arsenide semiconductor has what type of electrical field when compared to the other regions across the body of a semiconductor?

Last Answer : A field of much greater intensity.

The point on the current curve of a gallium-arsenide semiconductor at which it begins to exhibit negative resistance is called what?

Description : The point on the current curve of a gallium-arsenide semiconductor at which it begins to exhibit negative resistance is called what?

Last Answer : Threshold.

What happens to the electrons of a gallium-arsenide semiconductor when they move from the normal low-energy conduction band to the high-energy conduction band?

Description : What happens to the electrons of a gallium-arsenide semiconductor when they move from the normal low-energy conduction band to the high-energy conduction band?

Last Answer : The electrons become immobile.

What is another name for semiconductor memory chips?

Description : What is another name for semiconductor memory chips?

Last Answer : Integrated circuits.

A semiconductor memory consists of what?

Description : A semiconductor memory consists of what?

Last Answer : hundreds of thousands of tiny electronic circuits etched on a silicon chip

What characteristic of a transistor is varied in a semiconductor-reactance modulator?

Description : What characteristic of a transistor is varied in a semiconductor-reactance modulator?

Last Answer : Collector-to-emitter capacitance.

New LED light bulbs: do they emit more or less heat than standard incandescent?

Description : New LED light bulbs: do they emit more or less heat than standard incandescent?

Last Answer : answer:I could not guarantee accuracy, but from what I know LED is cooler. You can find out for sure if you buy one of each, and take turns standing in from of each one.

Do light bulbs emit an electrical current?

Description : Do light bulbs emit an electrical current?

Last Answer : They don’t emit anything. they use power, not create it. The different wattages match up to the sockets you have.

How do I make an LED emit light consistently across its plastic casing?

Description : How do I make an LED emit light consistently across its plastic casing?

Last Answer : answer:you could try having 3 LED’s in an arrangement like this; therfore you would have an LED at all angles I \ /

Can radio antennas emit visible light? -Physics

Description : Can radio antennas emit visible light? -Physics

Last Answer : Yes, radio antennas can emit visible light, but probably not in the way that you're thinking. If you pump enough energy into a radio antenna, you can heat it up until it glows and emits ... are other devices that can transmit information using visible light, the most practical of which is the laser.

Do stars emit of reflect light?

Description : Do stars emit of reflect light?

Last Answer : They emit their own light.

How does the moon emit light?

Description : How does the moon emit light?

Last Answer : The Moon does NOT emit light. To emit light you have to be asource of light and the Moon is not a source of light.The Moon REFLECTS light. The light it reflects comes from theSun (which does emit light).

Planets do not twinkle because they (a) emit light continuously (b) are luminous sources of light (c) are nearer to us and therefore their light does not pass through the atmosphere (d) are nearer to us and therefore minor variations in their intensity are not noticeable

Description : Planets do not twinkle because they (a) emit light continuously (b) are luminous sources of light (c) are nearer to us and therefore their light does not pass through the atmosphere (d) are nearer to us and therefore minor variations in their intensity are not noticeable

Last Answer : Ans:(d)

Stars twinkle but planets do not twinkle because – (1) they emit light of a constant intensity (2) their distance from the earth does not change with time (3) they are very far away from the earth resulting in decrease in intensity of light (4) they are nearer to the earth and hence we receive a greater amount of light and therefore minor variations in intensity are not noticeable

Description : Stars twinkle but planets do not twinkle because - (1) they emit light of a constant intensity (2) their distance from the earth does not change with time (3) they are very far away ... and hence we receive a greater amount of light and therefore minor variations in intensity are not noticeable

Last Answer : (4) they are nearer to the earth and hence we receive a greater amount of light and therefore minor variations in intensity are not noticeable Explanation: Eris is the most massive and second-largest ... orbiting the Sun, and the largest known body in the Solar System not visited by a spacecraft.

When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy state, they emit light, which we can observe in - (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Description : When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy state, they emit light, which we can observe in - (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Last Answer : (3) Emission spectra Explanation: When a metal atom is strongly heated, its electrons absorb the heat energy and jump to a higher energy level. When the electron returns to its original position it ... to the energy the electron has released at each stage °fits fall back to its original state.

Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Description : Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Last Answer : (4) All of the above Explanation: A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics.

In a Laser (say neon laser) all the atoms emit the light waves of – (1) Same frequency (2) Same amplitude (3) Same phase (4) All of the above

Description : In a Laser (say neon laser) all the atoms emit the light waves of – (1) Same frequency (2) Same amplitude (3) Same phase (4) All of the above

Last Answer : (4) All of the above Explanation: In a Laser all the atoms emit the light waves of same frequency, amplitude and phase. A laser is a device that emits light (electromagnetic radiation) ... photons. The term "laser" originated as an acronym for Light Amplification by Stimulated Emission of Radiation.

Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Description : Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Last Answer : B. infrared

Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Description : Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Last Answer : ∙ b. Infrared

When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy siate, they emit light, which we can observe in (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Description : When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy siate, they emit light, which we can observe in (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Last Answer : Emission spectra

In a Laser (say neon laser) all the atoms emit the light waves of (1) Same frequency (2) Same amplitude (3) Same phase (4) All of the above

Description : In a Laser (say neon laser) all the atoms emit the light waves of (1) Same frequency (2) Same amplitude (3) Same phase (4) All of the above

Last Answer : All of the above

Stars twinkle but planets do not twinkle because (1) they emit light of a constant intensity (2) their distance from the earth does not change with time (3) they are very far away from the earth resulting in decrease in intensity of light (4) they are nearer to the earth and hence we receive a greater amount of light and therefore minor variations in intensity are not noticeable

Description : Stars twinkle but planets do not twinkle because (1) they emit light of a constant intensity (2) their distance from the earth does not change with time (3) they are very far away from ... and hence we receive a greater amount of light and therefore minor variations in intensity are not noticeable 

Last Answer : they are nearer to the earth and hence we receive a greater amount of light and therefore minor variations in intensity are not noticeable