What transmission method does NOT depend on relative frequency or target motion?

What transmission method does NOT depend on relative  frequency or target motion?
by

1 Answer

Answer :

Pulse modulation.
by

Related questions

When a magnet is in motion relative to a coil the induced e.m.f. does not depend upon

Last Answer : When a magnet is in motion relative to a coil the induced e.m.f. does not depend upon resistance of the coil.

The actions of the tr and atr circuits depend on the impedance characteristics of what length of transmission line?

Description : The actions of the tr and atr circuits depend on the impedance characteristics of what length of transmission line?

Last Answer : Quarter-wavelength section

What transmission method uses a stable cw reference oscillator, which is locked in phase with the transmitter frequency?

Description : What transmission method uses a stable cw reference oscillator, which is locked in phase with the transmitter frequency?

Last Answer : Pulse-Doppler.

The relative amplitudes of different degrees of freedom in a two-degree-of-freedom system depend on the natural frequency.

Description : The relative amplitudes of different degrees of freedom in a two-degree-of-freedom system depend on the natural frequency.

Last Answer : True

Magnetic induction occurs when there is relative motion between what two elements?

Description : Magnetic induction occurs when there is relative motion between what two elements?

Last Answer : A conductor and a magnetic field.

On the diagram below, name the elements of the vacuum tube and their potentials relative to dc ground. time is an example of what type of transmission?

Description : On the diagram below, name the elements of the vacuum tube and their potentials relative to dc ground. time is an example of what type of transmission?

Last Answer : a. Plate, positive. b. Suppressor grid, negative.

The relative motion between observer and frequency is called

Description : The relative motion between observer and frequency is called

Last Answer : Doppler’s effect

The apparent change in frequency or pitch because of motion is explained by what effect?

Description : The apparent change in frequency or pitch because of motion is explained by what effect?

Last Answer : The Doppler effect.

In swept-frequency testing the impedance of a transmission line, what electrical characteristic is actually being measured?

Description : In swept-frequency testing the impedance of a transmission line, what electrical characteristic is actually being measured?

Last Answer : Swr on the transmission line.

What does relative heat depend on ?

Description : What does relative heat depend on ?

Last Answer : Depending on the relative heat content.

An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Description : An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Last Answer : (B) Be more in PFR than in CSTR

Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules. (b)It does not depends on number of particles of electrolyte solute in solution and does not depend on the nature of the solute particles. (c)It depends on the concentration of a non electrolyte solute in solution as well as on the nature of the solute molecules. (d)It depends on the concentration of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Description : Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of ... of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Last Answer : (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules.

In a digital computer, what does the number of decimal places in the constant depend on?

Description : In a digital computer, what does the number of decimal places in the constant depend on?

Last Answer : Design of the computer processing unit.

What do vertical component of the projectile motion of an object depend on?

Description : What do vertical component of the projectile motion of an object depend on?

Last Answer : Both of these

If a target is on the bearing axis of the radiated beam, what is the input to the bearing IF channel?

Description : If a target is on the bearing axis of the radiated beam, what is the input to the bearing IF channel?

Last Answer : Zero.

What type of target has a fixed phase relationship from one receiving period to the next?

Description : What type of target has a fixed phase relationship from one receiving period to the next?

Last Answer : Stationary.

How does the operator of a single-lobe scanning system determine when the target moves off the lobe axis?

Description : How does the operator of a single-lobe scanning system determine when the target moves off the lobe axis?

Last Answer : The reflected signals decrease in strength.

What type of target bearing is referenced to your ship?

Description : What type of target bearing is referenced to your ship?

Last Answer : Relative bearing

The distance from a radar set to a target measured along the line of sight is identified by what term?

Description : The distance from a radar set to a target measured along the line of sight is identified by what term?

Last Answer : Range.

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

On what subject does inductance in transmission line depend ?

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius

ECE Board Exam March 1996 The characteristics impedance of a transmission line does not depend upon its ________. A. conductor spacing B. conductor diameter C. length D. conductor radius

Description : ECE Board Exam March 1996 The characteristics impedance of a transmission line does not depend upon its ________. A. conductor spacing B. conductor diameter C. length D. conductor radius

Last Answer : C. length

What depend on the frequency on the sound waves?

Description : What depend on the frequency on the sound waves?

Last Answer : Pitch

How does the energy of a wave depend on its frequency if the amplitude stays constant?

Description : How does the energy of a wave depend on its frequency if the amplitude stays constant?

Last Answer : Feel Free to Answer

What depend on the frequency on the sound waves?

Description : What depend on the frequency on the sound waves?

Last Answer : Pitch

On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Description : On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Last Answer : Ans: D

If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Description : If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease

Last Answer : D. decrease

When two masses vibrate at the same frequency and in phase, it is called a principal mode of vibration A. True B. False C. Does not depend on vibration D. None of the above

Description : When two masses vibrate at the same frequency and in phase, it is called a principal mode of vibration A. True B. False C. Does not depend on vibration D. None of the above

Last Answer : A. True

The units of frequency factor in Arrhenius equation (A) Are the same as those of the rate constant (B) Depend on the order of the reaction (C) Depend on temperature, pressure etc. of the reaction (D) Are cycles per unit time

Description : The units of frequency factor in Arrhenius equation (A) Are the same as those of the rate constant (B) Depend on the order of the reaction (C) Depend on temperature, pressure etc. of the reaction (D) Are cycles per unit time

Last Answer : (A) Are the same as those of the rate constant

What is the relative length of the discharge time constant with respect to the charge time constant of a damper (long or short)?

Description : What is the relative length of the discharge time constant with respect to the charge time constant of a damper (long or short)?

Last Answer : Long time constant.

What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Description : What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Last Answer : Short time constant.

How does relative humidity over 95% cause excessive tape and head wear?

Description : How does relative humidity over 95% cause excessive tape and head wear?

Last Answer : High humidity causes increased friction as the tape passes over the heads.

When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Description : When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Last Answer : Dirt build-up caused by static electricity.

hard disks should be stored in an environment that stays within what relative humidity and temperature range?

Description : hard disks should be stored in an environment that stays within what relative humidity and temperature range?

Last Answer : electronics onto the disk. 30-60 percent relative humidity. b. 70-80 degrees Fahrenheit.

Before a diode will conduct, the cathode must be what polarity relative

Description : Before a diode will conduct, the cathode must be what polarity relative

Last Answer : Negative.

Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Last Answer : Waveguide dispersion.

When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Description : When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Last Answer : . High.

What determines the ability of radar to determine the bearing to a target? A. Speed of light B. Speed of target C. Antenna directivity D. Frequency of signal

Description : What determines the ability of radar to determine the bearing to a target? A. Speed of light B. Speed of target C. Antenna directivity D. Frequency of signal

Last Answer : C. Antenna directivity

What's relative motion got to do with it?

Description : What's relative motion got to do with it?

Last Answer : 1. Yes, it does. Relative to the outside observer, the bullet before it is fired is actually moving at 100mph, together with the car. Firing the bullet and accelerating it to 100 mph relative to ... with the bullet. That you exploited a certain aspect of the laws of physics for that is irrelevant.

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Description : Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Last Answer : d. Friction between dry surfaces

When the wavelength of a spectral line emitted from an object decreases which end of the visible light spectrum does it move toward and what is the object and motion relative to Earth?

Description : When the wavelength of a spectral line emitted from an object decreases which end of the visible light spectrum does it move toward and what is the object and motion relative to Earth?

Last Answer : Need answer

Relative to fexofenadine, diphenhydramine is more likely to (a) Be used for treatment of asthma (b) Be used for treatment of gastroesophageal reflux disease (c) Cause cardiac arrhythmias in overdose (d) Have efficacy in the prevention of motion sickness (e) Increase the serum concentration of warfarin

Description : Relative to fexofenadine, diphenhydramine is more likely to (a) Be used for treatment of asthma (b) Be used for treatment of gastroesophageal reflux disease (c) Cause cardiac arrhythmias in ... ) Have efficacy in the prevention of motion sickness (e) Increase the serum concentration of warfarin

Last Answer : Ans: D

The force which opposes the relative motion between different layers of liquid or gases is called – (1) Critical Velocity (2) Streamline Flow (3) Terminal Velocity (4) Viscous Force

Description : The force which opposes the relative motion between different layers of liquid or gases is called – (1) Critical Velocity (2) Streamline Flow (3) Terminal Velocity (4) Viscous Force

Last Answer : (4) Viscous Force Explanation: Critical Velocity – The maximum velocity upto which fluid motion is streamline is called Critical Velocity. Streamline Flow – If velocity of all fluid particles is same all the time then it can be said in streamline flow.

Who proposed this concept “All motion is relative”? A. Albert Einstein (Answer) B. John Kepler C. Galileo Galilie D. None

Description : Who proposed this concept “All motion is relative”? A. Albert Einstein (Answer) B. John Kepler C. Galileo Galilie D. None

Last Answer : A. Albert Einstein (Answer)

For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (C) There should be elastic deformation of the parts in contact

For hydrostatic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For hydrostatic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (B) There should be external source like pump to supply lubricant under pressure

For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space

Setscrews are (A) Similar to tap bolts except that a greater variety of shapes of heads are available (B) Slotted for screw driver and generally used with a nut (C) Used to prevent relative motion between parts (D) Similar to studs

Description : Setscrews are (A) Similar to tap bolts except that a greater variety of shapes of heads are available (B) Slotted for screw driver and generally used with a nut (C) Used to prevent relative motion between parts (D) Similar to studs

Last Answer : (C) Used to prevent relative motion between parts