What is the relative length of the discharge time constant with respect to the charge time constant of a damper (long or short)?

What is the relative length of the discharge time constant  with respect to the charge time constant of a damper (long or  short)?
by

1 Answer

Answer :

Long time constant.
by

Related questions

What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Description : What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Last Answer : Short time constant.

What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Description : What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Last Answer : Positive bias.

A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Description : A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Last Answer : Negative potential.

A negative damper damps which extremity of the output waveshape to 0 volts?

Description : A negative damper damps which extremity of the output waveshape to 0 volts?

Last Answer : Most positive.

What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Description : What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Last Answer : Positive clamper with negative bias.

To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Description : To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Last Answer : Positive potential.

A positive damper clamps which extremity of the output signal to 0 volts?

Description : A positive damper clamps which extremity of the output signal to 0 volts?

Last Answer : Most negative.

What is a short discharge of electric current that prepares the fiber ends for fusion called?

Description : What is a short discharge of electric current that prepares the fiber ends for fusion called?

Last Answer : Prefusion

A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Description : A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Last Answer : D 0.471

Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Description : Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Last Answer : D 1.25N-sec/m

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Last Answer : a) 0.471 and 1.19 Hz

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Last Answer : a) 0.471 and 1.19 Hz

Plants response to the relative length of daylight or darkness is known as: a. long day b. Short day c. Neutral d. Photoperiodism

Description : Plants response to the relative length of daylight or darkness is known as: a. long day b. Short day c. Neutral d. Photoperiodism

Last Answer : Photoperiodism

Consider the following statements: Mitra’s hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate of change of velocity per unit length of transition is constant throughout the length of the transition. Which of these statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

Factors that determine the radiation resistance of an antenna A. Transmission line length and height of antenna B. The location of the antenna with respect to nearby objects C. It is a constant for all antennas since it is physical D. Sunspot activity and the time of day

Description : Factors that determine the radiation resistance of an antenna A. Transmission line length and height of antenna B. The location of the antenna with respect to nearby objects C. It is a constant for all antennas since it is physical D. Sunspot activity and the time of day

Last Answer : B. The location of the antenna with respect to nearby objects

In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Description : In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Last Answer : Answer: Option B

Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a given discharge. 4. The Froude number is equal to unity. Which of these statements are correct? (a) 1 , 2 & 3 only (b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Description : Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a ... b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Last Answer : (b) 1, 2, 3 & 4

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

A shaft of length L is subject to a constant twisting moment T along its length L, then angle q through which one end of the bar will twist relative to other will be (a) T/g (b) T/GJ (c) GJ/TL (d) TL/GJ

Description : A shaft of length L is subject to a constant twisting moment T along its length L, then angle q through which one end of the bar will twist relative to other will be (a) T/g (b) T/GJ (c) GJ/TL (d) TL/GJ

Last Answer : (d) TL/GJ

In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

What determines the rate of discharge of the capacitor in a filter circuit?

Description : What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance.

. What determines the rate of discharge of the capacitor in a filter circuit?

Description : . What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance

What is the discharge rate for the capacitor in a pcm converter?

Description : What is the discharge rate for the capacitor in a pcm converter?

Last Answer : It will discharge to one-half its value between pulses.

A MOSFET can be damaged by an electrostatic discharge at approximately what minimum potential?

Description : A MOSFET can be damaged by an electrostatic discharge at approximately what minimum potential?

Last Answer : 35 volts.

At approximately what minimum voltage potential should you be able to feel an electrostatic discharge?

Description : At approximately what minimum voltage potential should you be able to feel an electrostatic discharge?

Last Answer : 3,500 to 4,000 volts.

The aqueduct or super-passage type of works are generally used when (A) High flood drainage discharge is small (B) High flood drainage discharge is large and short lived (C) High flood drainage discharge is large and continues for a long time (D) None of the above

Description : The aqueduct or super-passage type of works are generally used when (A) High flood drainage discharge is small (B) High flood drainage discharge is large and short lived (C) High flood drainage discharge is large and continues for a long time (D) None of the above

Last Answer : Answer: Option A

In …………….. referencing, the relative address of the cell gets adjust with respect to the current cell. -Technology

Description : In …………….. referencing, the relative address of the cell gets adjust with respect to the current cell. -Technology

Last Answer : In relative referencing, the relative address of the cell gets adjust with respect to the current cell.

With respect to the concept of materiality, which one of the following statements is correct? a. Materiality is a matter of professional judgment. b. Materiality is determined by reference to AASC's guidelines. c. Materiality depends on the nature of a transaction rather than the peso amount of the transaction. d. Materiality depends only on the peso amount of an item relative to other items in the financial statements

Description : With respect to the concept of materiality, which one of the following statements is correct? a. Materiality is a matter of professional judgment. b. Materiality is determined by reference to AASC's ... depends only on the peso amount of an item relative to other items in the financial statements

Last Answer : Materiality is a matter of professional judgment

Let the mobile phone completely discharge or charge continuously?

Description : Let the mobile phone completely discharge or charge continuously?

Last Answer : Need Answer

How to charge and discharge a capacitor?

Description : How to charge and discharge a capacitor?

Last Answer : There are different types of capacitor and of course the type of plate and dielectric makes it different from each other. Since the essense of the capacitor is to charge and discharged electric ... resistor of higher killo ohms which is expected to drain off all the voltage voltage with time.

An electric current of `2.0 mu A` exists in a discharge tube. How much charge flows across a cross-section of the tube in 5 minutes ?

Description : An electric current of `2.0 mu A` exists in a discharge tube. How much charge flows across a cross-section of the tube in 5 minutes ?

Last Answer : An electric current of `2.0 mu A` exists in a discharge tube. How much charge flows across a cross-section of the tube in 5 minutes ?

Under which of the following conditions will a lead-acid battery be given a 'test discharge'? A. To determine its capacity. B. Whenever a cell cannot be brought within 10 points of full charge specific gravity. C. When one or more cells is found to have less than normal voltage after an equalizing charge. D. All of the above.

Description : Under which of the following conditions will a lead-acid battery be given a 'test discharge'? A. To determine its capacity. B. Whenever a cell cannot be brought within 10 points of full charge ... cells is found to have less than normal voltage after an equalizing charge. D. All of the above.

Last Answer : Answer: D

The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Description : The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Last Answer : Answer: D

Where should the transmitter spectrum be located with respect to the receiver response curve?

Description : Where should the transmitter spectrum be located with respect to the receiver response curve?

Last Answer : In the center.

What is a disadvantage of a direct-current system with respect to supply voltage?

Description : What is a disadvantage of a direct-current system with respect to supply voltage?

Last Answer : the dc voltage must be generated at the level required by the load.

On the diagram below, name the elements of the vacuum tube and their potentials relative to dc ground. time is an example of what type of transmission?

Description : On the diagram below, name the elements of the vacuum tube and their potentials relative to dc ground. time is an example of what type of transmission?

Last Answer : a. Plate, positive. b. Suppressor grid, negative.

What transmission method does NOT depend on relative frequency or target motion?

Description : What transmission method does NOT depend on relative frequency or target motion?

Last Answer : Pulse modulation.

How does relative humidity over 95% cause excessive tape and head wear?

Description : How does relative humidity over 95% cause excessive tape and head wear?

Last Answer : High humidity causes increased friction as the tape passes over the heads.

When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Description : When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Last Answer : Dirt build-up caused by static electricity.

hard disks should be stored in an environment that stays within what relative humidity and temperature range?

Description : hard disks should be stored in an environment that stays within what relative humidity and temperature range?

Last Answer : electronics onto the disk. 30-60 percent relative humidity. b. 70-80 degrees Fahrenheit.

Before a diode will conduct, the cathode must be what polarity relative

Description : Before a diode will conduct, the cathode must be what polarity relative

Last Answer : Negative.

Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Last Answer : Waveguide dispersion.

When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Description : When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Last Answer : . High.

Magnetic induction occurs when there is relative motion between what two elements?

Description : Magnetic induction occurs when there is relative motion between what two elements?

Last Answer : A conductor and a magnetic field.

Select the correct statement from the ones given below with respect to Periplaneta americana. (a) Nervous system located dorsally, consists of segmentally arranged ganglia joined by a pair of longitudinal connectives. (b) Males bear a pair of short thread like anal styles. (c) There are 16 very long Malpighian tubules present at the junctions of midgut and hindgut. (d) Grinding of food is carried out only by the mouth parts.

Description : Select the correct statement from the ones given below with respect to Periplaneta americana. (a) Nervous system located dorsally, consists of segmentally arranged ganglia joined by a pair of longitudinal ... midgut and hindgut. (d) Grinding of food is carried out only by the mouth parts.

Last Answer : (b) Males bear a pair of short thread like anal styles.

Select the correct statement from the ones given below with respect to Periplaneta americana (1) Grinding of food is carried out only by the mouth parts (2) Nervous system located dorsally, consists of segmentally arranged ganglia joined by a pair of longitudinal connectives (3) Males bear a pair of short thread like anal styles (4) There are 16 very long Malpighian tubules present at the junctions of midgut and hindgut

Description : Select the correct statement from the ones given below with respect to Periplaneta americana (1) Grinding of food is carried out only by the mouth parts (2) Nervous system located dorsally, consists ... (4) There are 16 very long Malpighian tubules present at the junctions of midgut and hindgut

Last Answer : (3) Males bear a pair of short thread like anal styles

Which way does the damper go to open the flue on the fireplace?

Description : Which way does the damper go to open the flue on the fireplace?

Last Answer : answer:The ones I have used push up and back to open, letting smoke out. I highly recommend looking up there with a flashlight (once the ashes are cool, lol). It's a really simple iron mechanism, ... as complicated as a shoelace. Once you see it you will forever remember how to work the dang thing.

What is the function of damper in transmission line ?

Description : What is the function of damper in transmission line ?

Last Answer : : Using a damper on the transmission line protects the pole from vibration.

What is Damper Winding ? What is a damper winding ?

Description : What is Damper Winding ? What is a damper winding ?

Last Answer : To eliminate the banana oscillation of the alternator or synchronous motor, the pole sue is cut and a copper bar or rod is inserted in each groove and the two ends of the rods are shortened by a copper ring , this is called damper winding.

Can I buy an automatic fireplace flue damper that would open and close by itself when we want a fire?

Description : Can I buy an automatic fireplace flue damper that would open and close by itself when we want a fire?

Last Answer : Yes, there are automatic fireplace flue dampers available for sale on the internet. Check out www.fluesentinel.com and www.actionair.co.uk or fireplace showrooms near you for more detailed information.