The broadside array consists of a flat reflector and what other elements?

The broadside array consists of a flat reflector and what  other elements?
by

1 Answer

Answer :

Two or more half-wave dipoles.
by

Related questions

A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Description : A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Last Answer : B. Yagi-uda

As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Description : As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Last Answer : They sharpen.

When more than two elements are used in a broadside array, how are the elements arranged?

Description : When more than two elements are used in a broadside array, how are the elements arranged?

Last Answer : Parallel and in the same plane.

It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Description : It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Last Answer : D. Broadside array

All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Description : All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Last Answer : A. collinear

The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Description : The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Last Answer : A. Parasitic elements

Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Description : Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Last Answer : C. vertical antennas

______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Description : ______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Last Answer : A. Broadside array

Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Description : Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Last Answer : C. Rhombic antenna

One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Description : One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Last Answer : a.The rhombic antenna

What is the primary cause of broadside arrays losing efficiency when not operating at their designed frequency?

Description : What is the primary cause of broadside arrays losing efficiency when not operating at their designed frequency?

Last Answer : Lower radiation resistance.

What is the advantage of adding parasitic elements to a Yagi array?

Description : What is the advantage of adding parasitic elements to a Yagi array?

Last Answer : Increased gain.

How is directivity of a collinear array affected when the number of elements is increased?

Description : How is directivity of a collinear array affected when the number of elements is increased?

Last Answer : Directivity increases.

Why is the number of elements used in a collinear array limited?

Description : Why is the number of elements used in a collinear array limited?

Last Answer : As more elements are added, an unbalanced condition in the system occurs which impairs efficiency.

What is the maximum number of elements ordinarily used in a collinear array?

Description : What is the maximum number of elements ordinarily used in a collinear array?

Last Answer : Four.

How many major lobes are produced by a paraboloid reflector?

Description : How many major lobes are produced by a paraboloid reflector?

Last Answer : One.

A parabolic reflector changes a spherical wavefront to what type of wavefront?

Description : A parabolic reflector changes a spherical wavefront to what type of wavefront?

Last Answer : Plane.

How many major lobes are radiated by a parabolic reflector?

Description : How many major lobes are radiated by a parabolic reflector?

Last Answer : One

What type of reflector is most often used in directive antennas?

Description : What type of reflector is most often used in directive antennas?

Last Answer : Parabolic.

System 1 : The first column of the RH array consists of the terms 6,3,9,-2, and 4. System 2 : The first column of

Description : System 1 : The first column of the RH array consists of the terms 6,3,9,-2, and 4. System 2 : The first column of the RH array consists of the terms 3,6,9,2, and -4. The number of unstable poles for system1, and system 2, are respectively, (A) 1,1 (B) none, none (C) 2,2 (D) 2,1

Last Answer : System 1 : The first column of the RH array consists of the terms 6,3,9,-2, and 4. System 2 : The first column of the RH array consists of the terms 3,6,9,2, and -4. The number of unstable poles for system1, and system 2, are respectively, (A) 1,1 (B) none, none (C) 2,2 (D) 2,1

Best description of a collinear and broadside antenna radiation pattern. A. Bidirectional B. Perfect circle C. Unidirectional D. Omnidirectional

Description : Best description of a collinear and broadside antenna radiation pattern. A. Bidirectional B. Perfect circle C. Unidirectional D. Omnidirectional

Last Answer : A. Bidirectional

The radiation pattern of collinear and a broadside antenna is __

Description : The radiation pattern of collinear and a broadside antenna is __

Last Answer : bidirectional

The Yagi antenna is an example of what type of array?

Description : The Yagi antenna is an example of what type of array?

Last Answer : Multielement parasitic array.

What are the disadvantages of the parasitic array?

Description : What are the disadvantages of the parasitic array?

Last Answer : Their adjustment is critical and they do not operate over a wide frequency range.

The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Description : The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Last Answer : Rotary array.

hat two factors determine the directivity pattern of the parasitic array?

Description : hat two factors determine the directivity pattern of the parasitic array?

Last Answer : Length of the parasitic element (tuning) and spacing between the parasitic and driven elements.

To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Description : To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Last Answer : Symmetrically.

Where does the major lobe in the end-fire array occur?

Description : Where does the major lobe in the end-fire array occur?

Last Answer : Along the major axis

What are some disadvantages of the end-fire array?

Description : What are some disadvantages of the end-fire array?

Last Answer : Extremely low radiation resistance, confined to one frequency, and affected by atmospheric conditions.

How can the frequency range of a collinear array be increased?

Description : How can the frequency range of a collinear array be increased?

Last Answer : By increasing the lengths of the elements of the array.

A typical satellite communications operational link consists of a satellite and what two other components?

Description : A typical satellite communications operational link consists of a satellite and what two other components?

Last Answer : Earth terminals.

Python: How to get the indices of several elements in a list or numpy array at once? -Web-Development

Description : Python: How to get the indices of several elements in a list or numpy array at once? -Web-Development

Last Answer : answer:

Python : How to find the indices of elements in a sublist in a list or numpy array -Web-Development

Description : Python : How to find the indices of elements in a sublist in a list or numpy array -Web-Development

Last Answer : answer:

How to compute percentile of the Python array elements -Web-Development

Description : How to compute percentile of the Python array elements -Web-Development

Last Answer : answer:

Python : compute z-score for elements of an array -Web-Development

Description : Python : compute z-score for elements of an array -Web-Development

Last Answer : answer:

In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Last Answer : B. vertical quarter-wavelength rod

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Last Answer : B. 11

A mobile satellite array has usually how many elements? A. 6 B. 88 C. 12 D. 14

Description : A mobile satellite array has usually how many elements? A. 6 B. 88 C. 12 D. 14

Last Answer : D. 14

How can you sort the elements of the array in descending order?

Description : How can you sort the elements of the array in descending order?

Last Answer : By calling Sort() and then Reverse() methods. 

How can you sort the elements of the array in descending order?

Description : How can you sort the elements of the array in descending order? 

Last Answer : By calling Sort() and then Reverse() methods.

Suppose that data is an array of 1000 integers. Write a single function call that will sort the 100 elements data [222] through data [321].

Description : Suppose that data is an array of 1000 integers. Write a single function call that will sort the 100 elements data [222] through data [321].

Last Answer : quicksort ((data + 222), 100)

Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Description : Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Last Answer : d.Highgain

Accept data for five students and display it. Write a C++ program to displya sum of array elements of array size n.

Description : Accept data for five students and display it. Write a C++ program to displya sum of array elements of array size n. 

Last Answer : #include<iostream.h> #include<conio.h> void main() { int arr[20],i,n,sum=0; clrscr(); cout<<"\nEnter size of an array:"; cin>>n; cout<<"\nEnter ... ; } cout<<"\nSum of array elements is:"<<sum; getch(); }

Write a C++ program to accept array of five elements, find and display smallest number from an array.

Description : Write a C++ program to accept array of five elements, find and display smallest number from an array.

Last Answer : #include<iostream.h> #include<conio.h> void main() { int a[5],smallest,i; clrscr(); cout<<" Enter array elements:"; for(i=0;i<5;i++) cin>>a[i] ... } } cout<<endl<<"Smallest number="<<smallest; getch(); }

Write a program to sort elements of an array in ascending order.

Description : Write a program to sort elements of an array in ascending order.

Last Answer : #include #include void main() { int a[5],i,j,temp; clrscr(); printf("\n Enter array elements:"); for(i=0;i

Write a program to compute the sum of all elements stored in an array using pointers.

Description : Write a program to compute the sum of all elements stored in an array using pointers.

Last Answer : #include #include void main() { int a[5],sum=0,i,*ptr; clrscr(); printf("\n Enter array elements:"); for(i=0;i

Explain searching elements in array using pointers.

Description : Explain searching elements in array using pointers.

Last Answer : Consider an array of five elements as shown below: A[5]={ 10,20,30,40,50}; Search element(SE)=30 Pointer variable is declare as *ptr; Before starting search process ... If search element is not present in an array, then after comparing all elements stop the search process.