It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

It consists of a number of dipoles of equal size, equally spaced along a straight line with
all dipoles fed in the same phase from the same source.
A. Log-periodic antenna
B. Yagi antenna
C. End-fire array
D. Broadside array
by

1 Answer

Answer :

D. Broadside array
by

Related questions

A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Description : A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Last Answer : B. Yagi-uda

______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Description : ______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Last Answer : A. Broadside array

All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Description : All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Last Answer : A. collinear

Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Description : Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Last Answer : C. Rhombic antenna

Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Description : Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Last Answer : A. Rhombic antenna

Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Description : Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Last Answer : C. vertical antennas

One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Description : One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Last Answer : a.The rhombic antenna

Which of the following antennas receives signals equally well from all directions in a horizontal plane? A. Hetz antenna B. Vertical Marconi antenna C. Yagi antenna D. Helical antenna

Description : Which of the following antennas receives signals equally well from all directions in a horizontal plane? A. Hetz antenna B. Vertical Marconi antenna C. Yagi antenna D. Helical antenna

Last Answer : B. Vertical Marconi antenna

A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna

Description : A theoretical reference antenna that provides a comparison for antenna measurements. A. Marconi antenna B. Isotropic radiator C. Yagi-Uda array D. Whip antenna

Last Answer : B. Isotropic radiator

Refers to a type of beam antenna which uses two or more straight elements arranged in line with each other. A. Dipole antenna B. Yagi antenna C. Whip antenna D. Rhombic antenna

Description : Refers to a type of beam antenna which uses two or more straight elements arranged in line with each other. A. Dipole antenna B. Yagi antenna C. Whip antenna D. Rhombic antenna

Last Answer : B. Yagi antenna

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

_____ is an antenna made up of a number of full wavelengths A. Elementary doublet B. Log-periodic C. Long wire D. Whip

Description : _____ is an antenna made up of a number of full wavelengths A. Elementary doublet B. Log-periodic C. Long wire D. Whip

Last Answer : C. Long wire

If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Description : If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Last Answer : D. 6 watts

One of the following is very useful as a multiband HF receiving antenna. A. Parabolic antenna B. Elementary doublet C. Log-periodic D. Square loop

Description : One of the following is very useful as a multiband HF receiving antenna. A. Parabolic antenna B. Elementary doublet C. Log-periodic D. Square loop

Last Answer : C. Log-periodic

The broadside array consists of a flat reflector and what other elements?

Description : The broadside array consists of a flat reflector and what other elements?

Last Answer : Two or more half-wave dipoles.

Best description of a collinear and broadside antenna radiation pattern. A. Bidirectional B. Perfect circle C. Unidirectional D. Omnidirectional

Description : Best description of a collinear and broadside antenna radiation pattern. A. Bidirectional B. Perfect circle C. Unidirectional D. Omnidirectional

Last Answer : A. Bidirectional

Receives and collects satellite signals form a broadcast satellite. A. LNB B. Yagi-Uda array C. Satellite receiver D. Satellite disk

Description : Receives and collects satellite signals form a broadcast satellite. A. LNB B. Yagi-Uda array C. Satellite receiver D. Satellite disk

Last Answer : D. Satellite disk

The Yagi antenna is an example of what type of array?

Description : The Yagi antenna is an example of what type of array?

Last Answer : Multielement parasitic array.

What is the gain of four identically polarized antennas stacked one above the other and fed in phase? A. 3 dB over the gain of one antenna B. 10 dB over the gain of one antenna C. 4 dB over the gain of one antenna D. 6 dB over the gain of one antenna

Description : What is the gain of four identically polarized antennas stacked one above the other and fed in phase? A. 3 dB over the gain of one antenna B. 10 dB over the gain of one antenna C. 4 dB over the gain of one antenna D. 6 dB over the gain of one antenna

Last Answer : D. 6 dB over the gain of one antenna

Which antenna does not use the ground? A. Marconi B. Yagi C. Hertz D. Rhombic

Description : Which antenna does not use the ground? A. Marconi B. Yagi C. Hertz D. Rhombic

Last Answer : B. Yagi

Which of the following antennas receive signals in the horizontal plane equality well from all directions? A. Horizontal Hertz antenna B. Vertical loop antenna C. Vertical Yagi antenna D. A vertical antenna which is a quarter-wavelength long

Description : Which of the following antennas receive signals in the horizontal plane equality well from all directions? A. Horizontal Hertz antenna B. Vertical loop antenna C. Vertical Yagi antenna D. A vertical antenna which is a quarter-wavelength long

Last Answer : D. A vertical antenna which is a quarter-wavelength long

Which antenna is a properly terminated? A. Marconi B. Rhombic C. Dipole D. Yagi-Uda

Description : Which antenna is a properly terminated? A. Marconi B. Rhombic C. Dipole D. Yagi-Uda

Last Answer : B. Rhombic

Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna

Description : Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna

Last Answer : C. Marconi antenna

Type of antenna which is normally used for satellite tracking service. A. Omni B. Helical C. Yagi D. Dipole

Description : Type of antenna which is normally used for satellite tracking service. A. Omni B. Helical C. Yagi D. Dipole

Last Answer : B. Helical

An antenna that can only receive a television signal. A. Isotropic antenna B. TVRO C. Reference antenna D. Yagi antenna

Description : An antenna that can only receive a television signal. A. Isotropic antenna B. TVRO C. Reference antenna D. Yagi antenna

Last Answer : B. TVRO

Collects very weak signal from a broadcast satellite A. Satellite dish B. LNB C. Yagi-Uda antenna D. Satellite receiver

Description : Collects very weak signal from a broadcast satellite A. Satellite dish B. LNB C. Yagi-Uda antenna D. Satellite receiver

Last Answer : A. Satellite dish

Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Description : Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Last Answer : A. adding a capacitor in series and reducing the physical length

What is a driven element of an antenna? A. Always the rearmost element B. Always the forwardmost element C. The element fed by the transmission line D. The element connected to the rotator

Description : What is a driven element of an antenna? A. Always the rearmost element B. Always the forwardmost element C. The element fed by the transmission line D. The element connected to the rotator

Last Answer : C. The element fed by the transmission line

Modulation in which the modulated wave is always present. A. Carrier modulation B. Front-end C. Continuous modulation D. Log-periodic modulation

Description : Modulation in which the modulated wave is always present. A. Carrier modulation B. Front-end C. Continuous modulation D. Log-periodic modulation

Last Answer : C. Continuous modulation

A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW. What is the gain in dB, obtained by the use if the reflector. (Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Description : A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW ... Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Last Answer : B. 2.6

What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Description : What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Last Answer : C. Local oscillator, mixer and RF amplifier

_____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Description : _____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Last Answer : A. Antenna array

A shunt-fed quarter-wavelength Marconi antenna A. has maximum RF impedance to ground at its feedpoint B. has a current null at its feedpoint C. has a zero DC resistance to ground D. has zero RF resistance to ground

Description : A shunt-fed quarter-wavelength Marconi antenna A. has maximum RF impedance to ground at its feedpoint B. has a current null at its feedpoint C. has a zero DC resistance to ground D. has zero RF resistance to ground

Last Answer : C. has a zero DC resistance to ground

A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Description : A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Last Answer : D. must have a vertical receiving antenna for the best reception

The power fed to a two-bay turnstile antenna is 100 watts. If the antenna has a 2 dB power gain, what is the effective radiated power? A. 317 watts B. 158 watts C. 200 watts D. 400 watts

Description : The power fed to a two-bay turnstile antenna is 100 watts. If the antenna has a 2 dB power gain, what is the effective radiated power? A. 317 watts B. 158 watts C. 200 watts D. 400 watts

Last Answer : B. 158 watts

Assertion three infinitely long current carrying wires have equal currents and they are equally spaced. The magnitude of magnetic force on all three i

Description : Assertion three infinitely long current carrying wires have equal currents and they are equally spaced. The magnitude of magnetic force on all three i

Last Answer : Assertion three infinitely long current carrying wires have equal currents and they are equally spaced. The ... Reason Net force on wire-2 is zero.

What antenna radiates equally in all directions? A. Vertical antenna B. isotropic antenna C. Horizontal antenna D. Dipole antenna

Description : What antenna radiates equally in all directions? A. Vertical antenna B. isotropic antenna C. Horizontal antenna D. Dipole antenna

Last Answer : B. isotropic antenna

An ungrounded antenna near the ground A. acts as a single antenna of twice the height B. is unlikely to need an earth mat C. acts as antenna array D. must be horizontally polarized

Description : An ungrounded antenna near the ground A. acts as a single antenna of twice the height B. is unlikely to need an earth mat C. acts as antenna array D. must be horizontally polarized

Last Answer : C. acts as antenna array

In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Last Answer : B. vertical quarter-wavelength rod

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Last Answer : B. 11

The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Description : The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Last Answer : A. Parasitic elements

As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Description : As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Last Answer : They sharpen.

When more than two elements are used in a broadside array, how are the elements arranged?

Description : When more than two elements are used in a broadside array, how are the elements arranged?

Last Answer : Parallel and in the same plane.

Two wires that are bent 90 degrees apart. A. Hertz B. Dipole C. Log-periodic D. Rhomic

Description : Two wires that are bent 90 degrees apart. A. Hertz B. Dipole C. Log-periodic D. Rhomic

Last Answer : B. Dipole

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

The radiation pattern of collinear and a broadside antenna is __

Description : The radiation pattern of collinear and a broadside antenna is __

Last Answer : bidirectional

What is the advantage of adding parasitic elements to a Yagi array?

Description : What is the advantage of adding parasitic elements to a Yagi array?

Last Answer : Increased gain.

To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Description : To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Last Answer : Symmetrically.

A Hertz antenna is operating on a frequency of 2182 kHz and consists of a horizontal wire that is hanged between two towers. What is the frequency of its third harmonic? A. 727 kHz B. 6546 kHz C. 436 kHz D. 6.546 kHz

Description : A Hertz antenna is operating on a frequency of 2182 kHz and consists of a horizontal wire that is hanged between two towers. What is the frequency of its third harmonic? A. 727 kHz B. 6546 kHz C. 436 kHz D. 6.546 kHz

Last Answer : B. 6546 kHz