To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

To maintain the required balance of phase relationships  and critical feeding, how must the end-fire array be constructed?
by

1 Answer

Answer :

Symmetrically.
by

Related questions

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

Where does the major lobe in the end-fire array occur?

Description : Where does the major lobe in the end-fire array occur?

Last Answer : Along the major axis

What are some disadvantages of the end-fire array?

Description : What are some disadvantages of the end-fire array?

Last Answer : Extremely low radiation resistance, confined to one frequency, and affected by atmospheric conditions.

It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Description : It consists of a number of dipoles of equal size, equally spaced along a straight line with all dipoles fed in the same phase from the same source. A. Log-periodic antenna B. Yagi antenna C. End-fire array D. Broadside array

Last Answer : D. Broadside array

______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Description : ______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Last Answer : A. Broadside array

Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Description : Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Last Answer : A. Rhombic antenna

Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Description : Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Last Answer : C. Rhombic antenna

One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Description : One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Last Answer : a.The rhombic antenna

For which of the following medications must the nurse contact the pharmacist in consultation when the patient receives all oral medications by feeding tube? a) Enteric-coated tablets Enteric-coated tablets are meant to be digested in the intestinal tract and may be destroyed by stomach acids. A change of form of medication is required by patients with tube feedings.

Description : For which of the following medications must the nurse contact the pharmacist in consultation when the patient receives all oral medications by feeding tube? a) Enteric-coated tablets Enteric-coated ... make an opening in the capsule and squeeze out contents for administration by feeding tube.

Last Answer : a) Enteric-coated tablets Enteric-coated tablets are meant to be digested in the intestinal tract and may be destroyed by stomach acids. A change of form of medication is required by patients with tube feedings.

In the illustration, the component labeled 'EXC' is _______. EL-0003 A. a separate class II regulated DC generator for critical direct current loads B. a generator feeding the FLD winding through the voltage regulator. C. the controller to drive the governor for turbogenerator speed. D. the electronic driver for the switchboard metering circuits

Description : In the illustration, the component labeled 'EXC' is _______. EL-0003 A. a separate class II regulated DC generator for critical direct current loads B. a generator feeding the FLD ... to drive the governor for turbogenerator speed. D. the electronic driver for the switchboard metering circuits

Last Answer : Answer: B

What conditions must be met in order to balance a bridge circuit?

Description : What conditions must be met in order to balance a bridge circuit?

Last Answer : A bridge circuit is balanced when the opposite legs of the comparing and measuring circuits exhibit the same voltage drop.

How do you deal with disagreements with others in ways which will help to resolve difficulties and maintain long term relationships at work?

Description : How do you deal with disagreements with others in ways which will help to resolve difficulties and maintain long term relationships at work?

Last Answer : Need answer

According to promotional mix, method which focuses on building relationships with individual customers to maintain lasting relationship is called A. sales promotion B. offline promotion C. direct channeling D. direct marketing

Description : According to promotional mix, method which focuses on building relationships with individual customers to maintain lasting relationship is called A. sales promotion B. offline promotion C. direct channeling D. direct marketing

Last Answer : D. direct marketing

What is the simplest method of feeding power to the half wave antenna?

Description : What is the simplest method of feeding power to the half wave antenna?

Last Answer : To connect one end through a capacitor to the final output stage of the transmitter.

Which of the following is not the critical feature of qualitative research ? (A) Actual settings are the direct source of data. (B) Data take the forms of words or pictures. (C) Seeking to establish relationships among measured social facts. (D) Researcher becomes immersed in the situation, present or past related to the phenomena.

Description : Which of the following is not the critical feature of qualitative research ? (A) Actual settings are the direct source of data. (B) Data take the forms of words or pictures. (C) Seeking to ... social facts. (D) Researcher becomes immersed in the situation, present or past related to the phenomena. 

Last Answer : Write S if the statement pertains to the strength of a quantitative research, W if it's a weakness. 1. It can be costly, difficult and time-consuming. 2. It is objective and provides ... It filters out external factors. 5. The numerical data can be analyzed in a quick and easy way.

How may R-S FFs be constructed?

Description : How may R-S FFs be constructed?

Last Answer : By cross-coupling NAND or OR gates.

What type of flowchart is constructed by the programmer to represent the sequence of operations the computer is to perform to solve a specific problem?

Description : What type of flowchart is constructed by the programmer to represent the sequence of operations the computer is to perform to solve a specific problem?

Last Answer : A programming flowchart.

What type of rectifier is constructed by sandwiching a section of semiconductor material between two metal plates?

Description : What type of rectifier is constructed by sandwiching a section of semiconductor material between two metal plates?

Last Answer : Metallic rectifier.

The way a magnetic head will be used determines how it is constructed. Name three factors that determine the final construction of a magnetic head.

Description : The way a magnetic head will be used determines how it is constructed. Name three factors that determine the final construction of a magnetic head.

Last Answer : a. Type of head (record, reproduce, or erase). b. Frequencies it will record or reproduce. c. Whether it will be used on a single or multitrack recorder.

List four system topologies that can be constructed using point-to-point fiber optic links.

Description : List four system topologies that can be constructed using point-to-point fiber optic links.

Last Answer : Linear bus, ring, star, and tree topologies.

The broadside array consists of a flat reflector and what other elements?

Description : The broadside array consists of a flat reflector and what other elements?

Last Answer : Two or more half-wave dipoles.

The Yagi antenna is an example of what type of array?

Description : The Yagi antenna is an example of what type of array?

Last Answer : Multielement parasitic array.

What is the advantage of adding parasitic elements to a Yagi array?

Description : What is the advantage of adding parasitic elements to a Yagi array?

Last Answer : Increased gain.

What are the disadvantages of the parasitic array?

Description : What are the disadvantages of the parasitic array?

Last Answer : Their adjustment is critical and they do not operate over a wide frequency range.

The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Description : The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Last Answer : Rotary array.

hat two factors determine the directivity pattern of the parasitic array?

Description : hat two factors determine the directivity pattern of the parasitic array?

Last Answer : Length of the parasitic element (tuning) and spacing between the parasitic and driven elements.

As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Description : As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Last Answer : They sharpen.

When more than two elements are used in a broadside array, how are the elements arranged?

Description : When more than two elements are used in a broadside array, how are the elements arranged?

Last Answer : Parallel and in the same plane.

How is directivity of a collinear array affected when the number of elements is increased?

Description : How is directivity of a collinear array affected when the number of elements is increased?

Last Answer : Directivity increases.

How can the frequency range of a collinear array be increased?

Description : How can the frequency range of a collinear array be increased?

Last Answer : By increasing the lengths of the elements of the array.

Why is the number of elements used in a collinear array limited?

Description : Why is the number of elements used in a collinear array limited?

Last Answer : As more elements are added, an unbalanced condition in the system occurs which impairs efficiency.

What is the maximum number of elements ordinarily used in a collinear array?

Description : What is the maximum number of elements ordinarily used in a collinear array?

Last Answer : Four.

Why is it important to minimize TBE jitter in magnetic tape recordings where precise timing relationships exist between two or more signals?

Description : Why is it important to minimize TBE jitter in magnetic tape recordings where precise timing relationships exist between two or more signals?

Last Answer : The jitter could cause noise and a loss of accuracy.

A man is trapped in a room. The room has only two possible exits: two doors. Through the first door there is a room constructed from magnifying glass. The blazing hot sun instantly fries anything or anyone that enters. Through the second door there is a fire-breathing dragon. How does the man escape? -Riddles

Description : A man is trapped in a room. The room has only two possible exits: two doors. Through the first door there is a room constructed from magnifying glass. The blazing hot sun instantly fries anything ... enters. Through the second door there is a fire-breathing dragon. How does the man escape? -Riddles

Last Answer : He waits until night time and then goes through the first door.

If it is required to maintain fixed capitals then the partners’ shares of profits must be A) Credited to capital accounts B) Debited to capital accounts C) Debited to partners’ current accounts D) Credited to partners’ current accounts

Description : If it is required to maintain fixed capitals then the partners’ shares of profits must be A) Credited to capital accounts B) Debited to capital accounts C) Debited to partners’ current accounts D) Credited to partners’ current accounts

Last Answer : Answer: D

To propagate energy down an arm of a hybrid ring duplexer, the two fields at the junction of the arm and the ring must have what phase relationship? To propagate energy down an arm of a hybrid ring duplexer, the two fields at the junction of the arm and the ring must have what phase relationship?

Description : To propagate energy down an arm of a hybrid ring duplexer, the two fields at the junction of the arm and the ring must have what phase relationship?

Last Answer : 180 degrees out of phase

In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Description : In single-phase alternators, in order for the voltages induced in all the armature windings to add together for a single output, how must the windings be connected?

Last Answer : In series.

In a three phase half wave rectifier feeding resistive load, if the input source is a three phase 4 wire system

Description : In a three phase half wave rectifier feeding resistive load, if the input source is a three phase 4 wire system and line to line voltage is 100 V. The supply frequency is 400 Hz. The ripple frequency at the output is: (1) 400 Hz (2) 800 Hz (3) 1200 Hz (4) None of these

Last Answer : In a three phase half wave rectifier feeding resistive load, if the input source is a three phase 4 wire system and line to line voltage is 100 V. The supply frequency is 400 Hz. The ripple frequency at the output is: 1200 Hz

A solar cell of 350 V is feeding power to an ac supply of 440 V, 50 Hz through a 3-phase fully controlled bridge

Description : A solar cell of 350 V is feeding power to an ac supply of 440 V, 50 Hz through a 3-phase fully controlled bridge converter. A large inductance is connected in the dc circuit to maintain the dc current at 20 A ... thyristor will be reverse biased for a period of  (A) 125o (B) 120o (C) 60o (D) 55o

Last Answer : A solar cell of 350 V is feeding power to an ac supply of 440 V, 50 Hz through a 3-phase fully controlled bridge converter. A large inductance is connected in the dc circuit to maintain the ... the solar cell resistance is 0.5 Ohm ,then each thyristor will be reverse biased for a period of 125o

A three-phase, 440 V, 50 Hz ac mains fed thyristor bridge is feeding a 440 V dc, 15 kW, 1500 rpm separately

Description : A three-phase, 440 V, 50 Hz ac mains fed thyristor bridge is feeding a 440 V dc, 15 kW, 1500 rpm separately excited dc motor with a ripple free continuous current in the dc link under all operating conditions, Neglecting the ... at half the rated speed is  (A) 0.354 (B) 0.372 (C) 0.90 (D) 0.955

Last Answer : A three-phase, 440 V, 50 Hz ac mains fed thyristor bridge is feeding a 440 V dc, 15 kW, 1500 rpm separately excited dc motor with a ripple free continuous current in the dc link under all operating conditions, Neglecting the losses, the power factor of the ac mains at half the rated speed is 0.354

A three phase fully controlled bridge converter is feeding a load drawing a constant and ripple free load

Description : A three phase fully controlled bridge converter is feeding a load drawing a constant and ripple free load current of 10 A at a firing angle of 30o. The approximate Total harmonic Distortion (%THD) and the rms value of fundamental component ... (B) 31% and 7.8 A (C) 66% and 6.8 A (D) 66% and 7.8 A

Last Answer : A three phase fully controlled bridge converter is feeding a load drawing a constant and ripple free load current of 10 A at a firing angle of 30o. The approximate Total harmonic Distortion (%THD) and the rms value of fundamental component of input current will respectively be 31% and 7.8 A

A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms

Description : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Last Answer : Please show the solution for this question

When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a

Description : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is

Last Answer : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is √3/2

Expert power is the power that comes from the amount of knowledge a person has obtained in a specific area. This type ofpower is: 1. Critical to a project manager because the PM has to have as much or more knowledge than any of the team members tomake sure the project is completed successfully 2. Used by the PM to influence upper management and the critical stakeholders 3. Important if the project manager wants to maintain the respect of the project team 4. Used sparingly if at all by the PM because the PM cannot stay current on all areas of expertise and also manage the project

Description : Expert power is the power that comes from the amount of knowledge a person has obtained in  a specific area. This type ofpower is: 1. Critical to a project manager because the PM has to have ... by the PM because the PM cannot stay current on all areas of  expertise and also manage the project

Last Answer : 4. Used sparingly if at all by the PM because the PM cannot stay current on all areas of  expertise and also manage the project

If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Description : If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least (A) WL/P (B) WL/2P (C) WL/3P (D) WL/4P

Last Answer : Answer: Option D

A correcting entry a. must involve one balance sheet account and one income statement account. b. is another name for a closing entry. c. may involve any combination of accounts. d. is a required step in the accounting cycle.

Description : A correcting entry a. must involve one balance sheet account and one income statement account. b. is another name for a closing entry. c. may involve any combination of accounts. d. is a required step in the accounting cycle.

Last Answer : c. may involve any combination of accounts.

If tube feeding is continuous, the placement of the feeding tube should be checked a) every shift. Each nurse caring for the patient is responsible for verifying that the tube is located in the proper area for continuous feeding. b) every hour. Checking for placement each hour is unnecessary unless the patient is extremely restless or there is basis for rechecking the tube based on other patient activities. c) every 24 hours. Checking for placement every 24 hours does not meet the standard of care due the patient receiving continuous tube feedings. d) when a tube feeding is continuous, it is unnecessary to check placement. Even though the feedings are continuous, the placement must be assessed.

Description : If tube feeding is continuous, the placement of the feeding tube should be checked a) every shift. Each nurse caring for the patient is responsible for verifying that the tube is located ... is unnecessary to check placement. Even though the feedings are continuous, the placement must be assessed.

Last Answer : a) every shift. Each nurse caring for the patient is responsible for verifying that the tube is located in the proper area for continuous feeding.

Medium -length nasoenteric tubes are used for: a) Feeding Placement of the tube must be verified prior to any feeding. b) Decompression A gastric sump and nasoenteric tube are used for gastrointestinal decompression. c) Aspiration Nasoenteric tubes are used for gastrointestinal aspiration. d) Emptying Gastric sump tubes are used to decompress the stomach and keep it empty.

Description : Medium -length nasoenteric tubes are used for: a) Feeding Placement of the tube must be verified prior to any feeding. b) Decompression A gastric sump and nasoenteric tube are used for ... aspiration. d) Emptying Gastric sump tubes are used to decompress the stomach and keep it empty.

Last Answer : a) Feeding Placement of the tube must be verified prior to any feeding.

Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Description : Quality fiber-end preparation is essential for proper system operation. What properties must an optical fiber-end face have to ensure proper fiber connection?

Last Answer : Be flat, smooth, and perpendicular to the fiber axis.