What two main advantages of a parasitic array can be obtained by combining a reflector and a director with the driven element? What two main advantages of a parasitic array can be obtained by combining a reflector and a director with the driven element? What two main advantages of a paWhat two main advantages of a parasitic array can be obtained by combining a reflector and a director with the driven element?

What two main advantages of a parasitic array can be  obtained by combining a reflector and a director with the driven  element?
by

1 Answer

Answer :

Increased gain and directivity.
by

Related questions

The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Description : The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Last Answer : A. Parasitic elements

Which of the following improves antenna directivity? A. Driven element B. Reflector element C. Director element D. Parasitic element

Description : Which of the following improves antenna directivity? A. Driven element B. Reflector element C. Director element D. Parasitic element

Last Answer : D. Parasitic element

A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Description : A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Last Answer : B. Yagi-uda

The broadside array consists of a flat reflector and what other elements?

Description : The broadside array consists of a flat reflector and what other elements?

Last Answer : Two or more half-wave dipoles.

hat two factors determine the directivity pattern of the parasitic array?

Description : hat two factors determine the directivity pattern of the parasitic array?

Last Answer : Length of the parasitic element (tuning) and spacing between the parasitic and driven elements.

What is the advantage of adding parasitic elements to a Yagi array?

Description : What is the advantage of adding parasitic elements to a Yagi array?

Last Answer : Increased gain.

What are the disadvantages of the parasitic array?

Description : What are the disadvantages of the parasitic array?

Last Answer : Their adjustment is critical and they do not operate over a wide frequency range.

The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Description : The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Last Answer : Rotary array.

In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Last Answer : B. vertical quarter-wavelength rod

Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Description : Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Last Answer : d.Highgain

How many major lobes are produced by a paraboloid reflector?

Description : How many major lobes are produced by a paraboloid reflector?

Last Answer : One.

A parabolic reflector changes a spherical wavefront to what type of wavefront?

Description : A parabolic reflector changes a spherical wavefront to what type of wavefront?

Last Answer : Plane.

How many major lobes are radiated by a parabolic reflector?

Description : How many major lobes are radiated by a parabolic reflector?

Last Answer : One

What type of reflector is most often used in directive antennas?

Description : What type of reflector is most often used in directive antennas?

Last Answer : Parabolic.

A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW. What is the gain in dB, obtained by the use if the reflector. (Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Description : A dipole antenna requires to be fed with 20 kW of power to produce a given signal strength to a particular distant point. If the addition of a reflector makes the same field strength available with an input power of 11kW ... Gain referred to this particular dipole). A. 4.75 B. 2.6 C. 1.81 D. 4.24

Last Answer : B. 2.6

What are the three ways of combining cells, and what is each used for?

Description : What are the three ways of combining cells, and what is each used for?

Last Answer : Series, to increase voltage but not current. Parallel, to increase current but not voltage. Series-Parallel, to increase both current and

Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Last Answer : D. loading coil

Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass?(A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Description : Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass? (A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Last Answer : (A) dE = Tds - PdV

The main function of a communications satellite is a/ an A. repeater B. reflector C. beacon D. observation platform

Description : The main function of a communications satellite is a/ an A. repeater B. reflector C. beacon D. observation platform

Last Answer : A. repeater

Cassegrain feedis usedwith a parabolic reflectorto a. increase the gain of the system b. increase the beamwidth of the system c. reduce the size of the main reflector d. allowthe feedtobeplacedata convenientpoint

Description : Cassegrain feedis usedwith a parabolic reflectorto a. increase the gain of the system b. increase the beamwidth of the system c. reduce the size of the main reflector d. allowthe feedtobeplacedata convenientpoint

Last Answer : d. allowthe feedtobeplacedata convenientpoint

Salient-pole rotors may be used in alternators driven by what types of prime movers?

Description : Salient-pole rotors may be used in alternators driven by what types of prime movers?

Last Answer : Internal combustion engines, water force and electric motors

What is The word element that requires a combining vowel for attachment when it begins with a consonant is known as a?

Description : What is The word element that requires a combining vowel for attachment when it begins with a consonant is known as a?

Last Answer : Feel Free to Answer

In a fuel cell driven vehicle, the energy is obtained from the combustion of (A) Methane (B) Hydrogen (C) LPG (D) CNG

Description : In a fuel cell driven vehicle, the energy is obtained from the combustion of (A) Methane (B) Hydrogen (C) LPG (D) CNG

Last Answer : (B) Hydrogen

The parasitic element of an antenna system will A. decrease its directivity B. increase its directivity C. give the antenna unidirectional properties D. both B and C

Description : The parasitic element of an antenna system will A. decrease its directivity B. increase its directivity C. give the antenna unidirectional properties D. both B and C

Last Answer : D. both B and C

When more than two elements are used in a broadside array, how are the elements arranged?

Description : When more than two elements are used in a broadside array, how are the elements arranged?

Last Answer : Parallel and in the same plane.

The Yagi antenna is an example of what type of array?

Description : The Yagi antenna is an example of what type of array?

Last Answer : Multielement parasitic array.

To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Description : To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Last Answer : Symmetrically.

Where does the major lobe in the end-fire array occur?

Description : Where does the major lobe in the end-fire array occur?

Last Answer : Along the major axis

What are some disadvantages of the end-fire array?

Description : What are some disadvantages of the end-fire array?

Last Answer : Extremely low radiation resistance, confined to one frequency, and affected by atmospheric conditions.

As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Description : As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Last Answer : They sharpen.

How is directivity of a collinear array affected when the number of elements is increased?

Description : How is directivity of a collinear array affected when the number of elements is increased?

Last Answer : Directivity increases.

How can the frequency range of a collinear array be increased?

Description : How can the frequency range of a collinear array be increased?

Last Answer : By increasing the lengths of the elements of the array.

Why is the number of elements used in a collinear array limited?

Description : Why is the number of elements used in a collinear array limited?

Last Answer : As more elements are added, an unbalanced condition in the system occurs which impairs efficiency.

What is the maximum number of elements ordinarily used in a collinear array?

Description : What is the maximum number of elements ordinarily used in a collinear array?

Last Answer : Four.

What is the usual electrical length of a driven element in an HF beam antenna? A. ¼ wavelength B. ¾ wavelength C. ½ wavelength D. 1 wavelength

Description : What is the usual electrical length of a driven element in an HF beam antenna? A. ¼ wavelength B. ¾ wavelength C. ½ wavelength D. 1 wavelength

Last Answer : C. ½ wavelength

What is driven element? A. Always the rearmost element B. Always the forward most element C. The element fed by the transmission line D. The element connected to the rotator

Description : What is driven element? A. Always the rearmost element B. Always the forward most element C. The element fed by the transmission line D. The element connected to the rotator

Last Answer : C. The element fed by the transmission line

Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Description : Comparing the signal strength arriving at the driven element from the desired direction to the signal strength reaching the driver from the opposite direction. A. Directivity B. Sensitivity C. Beamwidth D. Front-to-back ratio

Last Answer : D. Front-to-back ratio

What is a driven element of an antenna? A. Always the rearmost element B. Always the forwardmost element C. The element fed by the transmission line D. The element connected to the rotator

Description : What is a driven element of an antenna? A. Always the rearmost element B. Always the forwardmost element C. The element fed by the transmission line D. The element connected to the rotator

Last Answer : C. The element fed by the transmission line

What are the advantages of stage array ?

Description : What are the advantages of stage array ?

Last Answer : The advantages of the periodic table are that the atomic mass and number of an element can be found. Electron can be arranged with the help of this.

What are the advantages and disadvantages of sparse matrix using array?

Description : What are the advantages and disadvantages of sparse matrix using array?

Last Answer : Feel Free to Answer

What is an Array? Write advantages of arrays?

Description : What is an Array? Write advantages of arrays?

Last Answer : An array is a collection of similar data items. All the data items of an array are stored in continuous memory locations in RAM. The elements of an array are of same data type and each item can be accessed using the same name.

Python : How to find the indices of a particular element in a numpy array -Web-Development

Description : Python : How to find the indices of a particular element in a numpy array -Web-Development

Last Answer : answer:

Python : how to find the frequency(count) of each element of a list or array? -Web-Development

Description : Python : how to find the frequency(count) of each element of a list or array? -Web-Development

Last Answer : answer:

The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Description : The switching from one element to the other element in a typical mobile satellite array. A. Series B. Radial C. Matrix D. Shunt

Last Answer : D. Shunt

Write a program in C++ to search an element from an array using pointer.

Description : Write a program in C++ to search an element from an array using pointer.

Last Answer : #include<iostream.h> #include<conio.h> void main() { int a[10], n, i,*p, flag=0, x; clrscr(); cout<<"Enter no. of array elements \n"; cin>>n; cout<< ... } if(flag==0) cout<<x<<"is not found \n"; getch(); }

Which of the following is true for computation time in insertion, deletion and finding maximum and minimum element in a sorted array? (1) Insertion-O(1), Deletion-O(1), Maximum-O(1), Minimum-O(1) (2) Insertion-O(1), Deletion-O(1), Maximum-O(n), Minimum-O(n) (3) Insertion-O(n), Deletion-O(n), Maximum-O(1), Minimum-O(1) (4) Insertion-O(n), Deletion-O(n), Maximum-O(n), Minimum-O(n)

Description : Which of the following is true for computation time in insertion, deletion and finding maximum and minimum element in a sorted array? (1) Insertion-O(1), Deletion-O(1), Maximum-O(1), Minimum-O(1) (2) Insertion-O(1), ... (1), Minimum-O(1) (4) Insertion-O(n), Deletion-O(n), Maximum-O(n), Minimum-O(n)

Last Answer : Answer: 3

The operating torque of the upper induction disc-type element, or timer element, of an AC reverse power relay is obtained from ____________. A. the main bus B. a separate battery source C. line voltage D. electromagnets

Description : The operating torque of the upper induction disc-type element, or timer element, of an AC reverse power relay is obtained from ____________. A. the main bus B. a separate battery source C. line voltage D. electromagnets

Last Answer : Answer: D

Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for the system must be on the lowest level where berthing quarters are located. C. Distribution panels must not be provided with a means of locking in order to permit quick activation of the system. D. Each system must have a separate branch circuit.

Description : Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for ... to permit quick activation of the system. D. Each system must have a separate branch circuit.

Last Answer : Answer: D

When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt field coil before testing C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Description : When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt ... C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Last Answer : Answer: B

Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results in death by asphyxiation (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles (D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere

Description : Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results ... D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere

Last Answer : (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles