Why is the number of elements used in a collinear array limited?

Why is the number of elements used in a collinear array  limited?
by

1 Answer

Answer :

As more elements are added, an unbalanced condition in the  system occurs which impairs efficiency.
by

Related questions

How is directivity of a collinear array affected when the number of elements is increased?

Description : How is directivity of a collinear array affected when the number of elements is increased?

Last Answer : Directivity increases.

What is the maximum number of elements ordinarily used in a collinear array?

Description : What is the maximum number of elements ordinarily used in a collinear array?

Last Answer : Four.

How can the frequency range of a collinear array be increased?

Description : How can the frequency range of a collinear array be increased?

Last Answer : By increasing the lengths of the elements of the array.

All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Description : All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Last Answer : A. collinear

A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Description : A type of array antenna which consists of one half-wave driven dipole, one reflector and one director A. Hertzian dipole B. Yagi-uda C. Broadside collinear D. Log periodic dipole array

Last Answer : B. Yagi-uda

The broadside array consists of a flat reflector and what other elements?

Description : The broadside array consists of a flat reflector and what other elements?

Last Answer : Two or more half-wave dipoles.

What is the advantage of adding parasitic elements to a Yagi array?

Description : What is the advantage of adding parasitic elements to a Yagi array?

Last Answer : Increased gain.

As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Description : As the spacing between elements in a broadside array increases, what is the effect on the major lobes?

Last Answer : They sharpen.

When more than two elements are used in a broadside array, how are the elements arranged?

Description : When more than two elements are used in a broadside array, how are the elements arranged?

Last Answer : Parallel and in the same plane.

The Yagi antenna is an example of what type of array?

Description : The Yagi antenna is an example of what type of array?

Last Answer : Multielement parasitic array.

What are the disadvantages of the parasitic array?

Description : What are the disadvantages of the parasitic array?

Last Answer : Their adjustment is critical and they do not operate over a wide frequency range.

The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Description : The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Last Answer : Rotary array.

hat two factors determine the directivity pattern of the parasitic array?

Description : hat two factors determine the directivity pattern of the parasitic array?

Last Answer : Length of the parasitic element (tuning) and spacing between the parasitic and driven elements.

To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Description : To maintain the required balance of phase relationships and critical feeding, how must the end-fire array be constructed?

Last Answer : Symmetrically.

Where does the major lobe in the end-fire array occur?

Description : Where does the major lobe in the end-fire array occur?

Last Answer : Along the major axis

What are some disadvantages of the end-fire array?

Description : What are some disadvantages of the end-fire array?

Last Answer : Extremely low radiation resistance, confined to one frequency, and affected by atmospheric conditions.

Write a C++ program to accept array of five elements, find and display smallest number from an array.

Description : Write a C++ program to accept array of five elements, find and display smallest number from an array.

Last Answer : #include<iostream.h> #include<conio.h> void main() { int a[5],smallest,i; clrscr(); cout<<" Enter array elements:"; for(i=0;i<5;i++) cin>>a[i] ... } } cout<<endl<<"Smallest number="<<smallest; getch(); }

What minimum number of non-zero non-collinear vectors is required to produce a zero vector? -General Knowledge

Description : What minimum number of non-zero non-collinear vectors is required to produce a zero vector? -General Knowledge

Last Answer : The answer is '3'

What minimum number of non-zero non-collinear vectors is required to produce a zero vector? -General Knowledge

Description : What minimum number of non-zero non-collinear vectors is required to produce a zero vector? -General Knowledge

Last Answer : answer:

What minimum number of non-zero non-collinear vectors is required to produce a zero vector? -General Knowledge

Description : What minimum number of non-zero non-collinear vectors is required to produce a zero vector? -General Knowledge

Last Answer : answer:

What minimum number of non-zero non-collinear vectors is required to produce a zero vector?

Description : What minimum number of non-zero non-collinear vectors is required to produce a zero vector?

Last Answer : 3

Python: How to get the indices of several elements in a list or numpy array at once? -Web-Development

Description : Python: How to get the indices of several elements in a list or numpy array at once? -Web-Development

Last Answer : answer:

Python : How to find the indices of elements in a sublist in a list or numpy array -Web-Development

Description : Python : How to find the indices of elements in a sublist in a list or numpy array -Web-Development

Last Answer : answer:

How to compute percentile of the Python array elements -Web-Development

Description : How to compute percentile of the Python array elements -Web-Development

Last Answer : answer:

Python : compute z-score for elements of an array -Web-Development

Description : Python : compute z-score for elements of an array -Web-Development

Last Answer : answer:

In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Last Answer : B. vertical quarter-wavelength rod

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Last Answer : B. 11

A mobile satellite array has usually how many elements? A. 6 B. 88 C. 12 D. 14

Description : A mobile satellite array has usually how many elements? A. 6 B. 88 C. 12 D. 14

Last Answer : D. 14

The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Description : The reflector and director of an antenna array are considered as A. Parasitic elements B. Transcendental elements C. Feed-points D. Driven elements

Last Answer : A. Parasitic elements

How can you sort the elements of the array in descending order?

Description : How can you sort the elements of the array in descending order?

Last Answer : By calling Sort() and then Reverse() methods. 

How can you sort the elements of the array in descending order?

Description : How can you sort the elements of the array in descending order? 

Last Answer : By calling Sort() and then Reverse() methods.

Suppose that data is an array of 1000 integers. Write a single function call that will sort the 100 elements data [222] through data [321].

Description : Suppose that data is an array of 1000 integers. Write a single function call that will sort the 100 elements data [222] through data [321].

Last Answer : quicksort ((data + 222), 100)

Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Description : Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Last Answer : d.Highgain

Accept data for five students and display it. Write a C++ program to displya sum of array elements of array size n.

Description : Accept data for five students and display it. Write a C++ program to displya sum of array elements of array size n. 

Last Answer : #include<iostream.h> #include<conio.h> void main() { int arr[20],i,n,sum=0; clrscr(); cout<<"\nEnter size of an array:"; cin>>n; cout<<"\nEnter ... ; } cout<<"\nSum of array elements is:"<<sum; getch(); }

Write a program to sort elements of an array in ascending order.

Description : Write a program to sort elements of an array in ascending order.

Last Answer : #include #include void main() { int a[5],i,j,temp; clrscr(); printf("\n Enter array elements:"); for(i=0;i

Write a program to compute the sum of all elements stored in an array using pointers.

Description : Write a program to compute the sum of all elements stored in an array using pointers.

Last Answer : #include #include void main() { int a[5],sum=0,i,*ptr; clrscr(); printf("\n Enter array elements:"); for(i=0;i

Explain searching elements in array using pointers.

Description : Explain searching elements in array using pointers.

Last Answer : Consider an array of five elements as shown below: A[5]={ 10,20,30,40,50}; Search element(SE)=30 Pointer variable is declare as *ptr; Before starting search process ... If search element is not present in an array, then after comparing all elements stop the search process.

When an array is passed as parameter to a function, which of the following statements is correct ? (A) The function can change values in the original array. (B) In C, parameters are passed by value, the function cannot change the original value in the array. (C) It results in compilation error when the function tries to access the elements in the array. (D) Results in a run time error when the function tries to access the elements in the array.

Description : When an array is passed as parameter to a function, which of the following statements is correct ? (A) The function can change values in the original array. (B) In C, parameters are passed by value, ... . (D) Results in a run time error when the function tries to access the elements in the array.

Last Answer : (A) The function can change values in the original array.

Two circles intersect at A and B. AC and AD are respectively the diameters of the circles. Prove that C, B and D are collinear. -Maths 9th

Description : Two circles intersect at A and B. AC and AD are respectively the diameters of the circles. Prove that C, B and D are collinear. -Maths 9th

Last Answer : Join CB, BD and AB, Since, AC is a diameter of the circle with centre O. ∴ ∠ABC = 90° [angle in semi circle] ---- (i) Also, AD is a diameter of the circle with center O . ∴ ∠ABD = 90° [angle in ... ⇒ ∠ABC + ∠ABD = 180° So. CBD is a straight line. Hence C, B and D are collinear . Hence proved.

Plot the following points and check whether they are collinear or not -Maths 9th

Description : Plot the following points and check whether they are collinear or not -Maths 9th

Last Answer : (i) Plotting the points P (1, 3), Q (-1, -1) and R (-2, - 3) on the graph paper and join these points, we get a straight line. Hence, these points are collinear. (ii) Plotting the points ... 6 (5, 5)on the graph paper and join these points, we get a straight line. Hence, given points are collinear.

Two circles intersect at A and B. AC and AD are respectively the diameters of the circles. Prove that C, B and D are collinear. -Maths 9th

Description : Two circles intersect at A and B. AC and AD are respectively the diameters of the circles. Prove that C, B and D are collinear. -Maths 9th

Last Answer : Join CB, BD and AB, Since, AC is a diameter of the circle with centre O. ∴ ∠ABC = 90° [angle in semi circle] ---- (i) Also, AD is a diameter of the circle with center O . ∴ ∠ABD = 90° [angle in ... ⇒ ∠ABC + ∠ABD = 180° So. CBD is a straight line. Hence C, B and D are collinear . Hence proved.

Plot the following points and check whether they are collinear or not -Maths 9th

Description : Plot the following points and check whether they are collinear or not -Maths 9th

Last Answer : (i) Plotting the points P (1, 3), Q (-1, -1) and R (-2, - 3) on the graph paper and join these points, we get a straight line. Hence, these points are collinear. (ii) Plotting the points ... 6 (5, 5)on the graph paper and join these points, we get a straight line. Hence, given points are collinear.

Plot the following points and check whether they are collinear or not: -Maths 9th

Description : Plot the following points and check whether they are collinear or not: -Maths 9th

Last Answer : Solution :-

There are 18 points in a plane such that no three of them are in the same line except five points which are collinear. -Maths 9th

Description : There are 18 points in a plane such that no three of them are in the same line except five points which are collinear. -Maths 9th

Last Answer : answer:

Show that the points (a, b + c), (b, c + a), (c, a + b) are collinear. -Maths 9th

Description : Show that the points (a, b + c), (b, c + a), (c, a + b) are collinear. -Maths 9th

Last Answer : Let A(x1, y1) ≡ (1, 3), B(x2, y2) ≡ (2, 4), C(x3, y3) ≡ (5, 6) be the vertices of ΔABCArea of ΔABC = \(rac{1}{2}\) |{\(x_1\)(y2 – y3) + \(x_2\)(y3 – y1) + \(x​​_3\)(y1 – y2)}|= \(rac{1}{2}\) |{1(4 – 6) + 2(6 – 3) + 5(3 – 4)}| = \(rac{1}{2}\) |{–2 + 6 – 5}| = \(rac{1}{2}\) sq. units.

If the points (x, 1), (1, 2) and (0, y + 1) are collinear show that -Maths 9th

Description : If the points (x, 1), (1, 2) and (0, y + 1) are collinear show that -Maths 9th

Last Answer : Two lines are parallel if their slopes are equal∴ \(rac{0-(-8)}{3-(-5)}\) = \(rac{a-3}{4-6}\) ⇒ \(rac{8}{8}\) = \(rac{a-3}{-2}\) ⇒ a – 3 = –2 ⇒ a = 1.

If the points A(1, 2), B(0, 0) and C(a, b) are collinear, then -Maths 9th

Description : If the points A(1, 2), B(0, 0) and C(a, b) are collinear, then -Maths 9th

Last Answer : (a) - 2For three points to be collinear, area of the triangle formed by the three points should be equal to zero, i.e.\(rac{1}{2}\) [k(3k - 1) + 2k(1 - 2k) + 3(2k - 3k)] = 0⇒ \(rac{1}{2}\) [3k2 - k + ... = 0 or -2 Neglecting k = 0, as then (k, 2k) and (2k, 3k) will be the same point, we take k = -2.