What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

What transmitter component allows the radiation of a large  number of discrete frequencies over a wide band?
by

1 Answer

Answer :

. Frequency synthesizer.
by

Related questions

When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Description : When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Last Answer : Selective fading.

What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Description : What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Last Answer : Spectrum analyzer.

ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Description : ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Last Answer : A. aperiodic

Black body radiation spectrum is an example of a) band spectra b) continuous spectra c) discrete spectra d) atomic spectra

Description : Black body radiation spectrum is an example of a) band spectra b) continuous spectra c) discrete spectra d) atomic spectra

Last Answer : b) continuous spectra

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Description : What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Last Answer : . Band-reject.

What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Last Answer : Bandwidth of the circuit

When a solid material is heated, it always: w) emits a discrete radiation spectrum x) glows red y) emits a continuous radiation spectrum z) emits only visible radiation

Description : When a solid material is heated, it always: w) emits a discrete radiation spectrum x) glows red y) emits a continuous radiation spectrum z) emits only visible radiation

Last Answer : ANSWER: Y -- EMITS A CONTINUOUS RADIATION SPECTRUM

Atomic Spectra is an example of a) discrete spectra b) band spectra c) atomic spectra d) continuous spectra

Description : Atomic Spectra is an example of a) discrete spectra b) band spectra c) atomic spectra d) continuous spectra

Last Answer : a) discrete spectra

Molecular spectra is an example of a) continuous spectra b) discrete spectra c) band spectra d) atomic spectra

Description : Molecular spectra is an example of a) continuous spectra b) discrete spectra c) band spectra d) atomic spectra

Last Answer : c) band spectra

What term is used to describe the definite discrete amounts of energy required to move an electron from a low shell to a higher shell?

Description : What term is used to describe the definite discrete amounts of energy required to move an electron from a low shell to a higher shell?

Last Answer : Quanta.

Components made up exclusively of discrete elements are classified as what type of electronics?

Description : Components made up exclusively of discrete elements are classified as what type of electronics?

Last Answer : Miniature.

Name the modulation system in which the frequency alternates between two discrete values in response to the opening and closing of a key?

Description : Name the modulation system in which the frequency alternates between two discrete values in response to the opening and closing of a key?

Last Answer : . Frequency-shift keying.

What type of radar transmitter power is measured over a period of time?

Description : What type of radar transmitter power is measured over a period of time?

Last Answer : Average power.

Planck's constant was first introduced in order to obtain a correct theoretical prediction of: w) the distribution of frequencies occurring in black body radiation. x) the energy produced by the transformation of mass into energy. y) the speed of light. z) lifetime of the neutron.

Description : Planck's constant was first introduced in order to obtain a correct theoretical prediction of: w) the distribution of frequencies occurring in black body radiation. x) the energy produced by the transformation of mass into energy. y) the speed of light. z) lifetime of the neutron.

Last Answer : ANSWER: W -- THE DISTRIBUTION OF FREQUENCIES OCCURRING IN BLACK BODY RADIATION

The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Description : The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Last Answer : D. 300 – 3000 MHz

What band of frequencies do these satellites operate? A. L band B. Ka band C. C band D. Ku band

Description : What band of frequencies do these satellites operate? A. L band B. Ka band C. C band D. Ku band

Last Answer : A. L band

Which band of frequencies used by military for its satellites and radar? A. C band B. X band C. L band D. P band

Description : Which band of frequencies used by military for its satellites and radar? A. C band B. X band C. L band D. P band

Last Answer : B. X band

Troposheric scatter uses the frequencies in the ________ band. A. VLF B. UHF C. VHF D. UF

Description : Troposheric scatter uses the frequencies in the ________ band. A. VLF B. UHF C. VHF D. UF

Last Answer : B. UHF

The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Description : The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Last Answer : C. band stop

The band of light frequencies that are too low to be seen by the human eye ∙ A. Infrared ∙ B. X-rays ∙ C. Visible ∙ D. Ultraviolet

Description : The band of light frequencies that are too low to be seen by the human eye ∙ A. Infrared ∙ B. X-rays ∙ C. Visible ∙ D. Ultraviolet

Last Answer : Ultraviolet

The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Description : The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Last Answer : B. Visible light

The band of light frequencies that are too high to be seen by the human eye. ∙ A. Ultraviolet ∙ B. Visible light ∙ C. Infrared ∙ D. Yellow

Description : The band of light frequencies that are too high to be seen by the human eye. ∙ A. Ultraviolet ∙ B. Visible light ∙ C. Infrared ∙ D. Yellow

Last Answer : ∙ C. Infrared

What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz

Description : What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz

Last Answer : ANSWER: Y -- 300 to 3,000 MEGA HERTZ

What range of frequencies are usually referred to as the UHF Band? w) 3 to 30 Megahertz x) 30 to 300 Megahertz y) 300 to 3,000 Megahertz z) 30,000 to 300,000 Megahertz

Description : What range of frequencies are usually referred to as the UHF Band? w) 3 to 30 Megahertz x) 30 to 300 Megahertz y) 300 to 3,000 Megahertz z) 30,000 to 300,000 Megahertz

Last Answer : ANSWER: Y -- 300 TO 3,000 MEGAHERTZ

In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Description : In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Last Answer : Answer: A Explanation: Each cell has six other adjacent cells, in a hexagonal grid. If the central cell uses frequency group A, its six adjacent cells can use B, C, B, C, B, and C respectively. In other words, only 3 unique cells are needed. So the answer is 840/3 = 280 frequencies.

Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very high-frequency waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Description : Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very ... waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Last Answer : (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz.

What type of insulator works well at very high frequencies?

Description : What type of insulator works well at very high frequencies?

Last Answer : A shorted quarter-wave section called a metallic insulator.

At very high frequencies, what characteristics are displayed by ordinary insulators?

Description : At very high frequencies, what characteristics are displayed by ordinary insulators?

Last Answer : The characteristics of the dielectric of a capacitor.

. Why are coaxial lines more efficient at microwave frequencies than two-wire transmission lines?

Description : . Why are coaxial lines more efficient at microwave frequencies than two-wire transmission lines?

Last Answer : The electromagnetic fields are completely confined

A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Description : A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Last Answer : Resonance.

What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

What is the filter called that passes low frequencies but rejects or attenuates high frequencies?

Description : What is the filter called that passes low frequencies but rejects or attenuates high frequencies?

Last Answer : Low-pass filter, high-frequency discriminator or high-frequency attenuator.

What is the filter called in which the low frequencies do not produce a useful voltage?

Description : What is the filter called in which the low frequencies do not produce a useful voltage?

Last Answer : High-pass filter, low-frequency discriminator, or low-frequency attenuator.

What is the device called that will separate alternating current from direct current, or that will separate alternating current of one frequency from other alternating currents of different frequencies?

Description : What is the device called that will separate alternating current from direct current, or that will separate alternating current of one frequency from other alternating currents of different frequencies?

Last Answer : A filter.

What effect does transit time have on a conventional triode operated at uhf frequencies?

Description : What effect does transit time have on a conventional triode operated at uhf frequencies?

Last Answer : It causes the control grid to short to the cathode

How does fog affect radio waves at frequencies above 2 gigahertz?

Description : How does fog affect radio waves at frequencies above 2 gigahertz?

Last Answer : It can cause attenuation by absorbtion.

Receiver bandwidth is defined as those frequencies spread between what two points of the receiver response curve?

Description : Receiver bandwidth is defined as those frequencies spread between what two points of the receiver response curve?

Last Answer : Half-power points.

What IF frequencies are normally used in radar receivers

Description : What IF frequencies are normally used in radar receivers

Last Answer : Thirty or sixty megahertz.

Why do 2D air-search radars use relatively low carrier frequencies and low pulse-repetition rates?

Description : Why do 2D air-search radars use relatively low carrier frequencies and low pulse-repetition rates?

Last Answer : Increased maximum range.

Is it possible for a transmission line to operate improperly at certain frequencies and properly at others?

Description : Is it possible for a transmission line to operate improperly at certain frequencies and properly at others?

Last Answer : Yes, it is quite common.

At frequencies above 100 megahertz, the intrinsic (i) region causes a pin diode to act as what?

Description : At frequencies above 100 megahertz, the intrinsic (i) region causes a pin diode to act as what?

Last Answer : Variable resistance.

The cavities of a multicavity klystron are tuned to slightly different frequencies in what method of tuning?

Description : The cavities of a multicavity klystron are tuned to slightly different frequencies in what method of tuning?

Last Answer : Stagger tuning.

How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Description : How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Last Answer : Transit time causes the grid voltage and plate current to be out of phase

When using frequencies above 30 megahertz, you are normally limited to using what range?

Description : When using frequencies above 30 megahertz, you are normally limited to using what range?

Last Answer : Line of sight.

What frequencies are provided through the back-panel BNC?

Description : What frequencies are provided through the back-panel BNC?

Last Answer : 1 MHz and 10 MHz.

What type of polarization should be used if an antenna is mounted on a moving vehicle at frequencies below 50 megahertz?

Description : What type of polarization should be used if an antenna is mounted on a moving vehicle at frequencies below 50 megahertz?

Last Answer : Vertical polarization.

What is an advantage of using horizontal polarization at high frequencies?

Description : What is an advantage of using horizontal polarization at high frequencies?

Last Answer : Less interference is experienced by man-made noise sources

What type of polarization should be used at medium and low frequencies?

Description : What type of polarization should be used at medium and low frequencies?

Last Answer : Vertical polarization.