What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

What device sweeps a band of frequencies to determine  frequencies and amplitudes of each frequency component?
by

1 Answer

Answer :

Spectrum analyzer.
by

Related questions

When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Description : When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Last Answer : Selective fading.

What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Description : What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Last Answer : . Frequency synthesizer.

What is the device called that will separate alternating current from direct current, or that will separate alternating current of one frequency from other alternating currents of different frequencies?

Description : What is the device called that will separate alternating current from direct current, or that will separate alternating current of one frequency from other alternating currents of different frequencies?

Last Answer : A filter.

What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Description : What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Last Answer : . Band-reject.

What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Last Answer : Bandwidth of the circuit

When the torsional pendulum vibrating the observed amplitudes on the same side of neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Description : When the torsional pendulum vibrating the observed amplitudes on the same side of neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Last Answer : C 0.693

When the torsional pendulum vibrating, the observed amplitudes on the same side of the neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Description : When the torsional pendulum vibrating, the observed amplitudes on the same side of the neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Last Answer : C 0.693

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz

Description : What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz

Last Answer : ANSWER: Y -- 300 to 3,000 MEGA HERTZ

In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Description : In a typical mobile phone system with hexagonal cells, it is forbidden to reuse a frequency band in adjacent cells. If 840 frequencies are available, how many can be used in a given cell? (A) 280 (B) 210 (C) 140 (D) 120

Last Answer : Answer: A Explanation: Each cell has six other adjacent cells, in a hexagonal grid. If the central cell uses frequency group A, its six adjacent cells can use B, C, B, C, B, and C respectively. In other words, only 3 unique cells are needed. So the answer is 840/3 = 280 frequencies.

Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very high-frequency waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Description : Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very ... waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Last Answer : (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz.

A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Description : A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Last Answer : Resonance.

What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

The relative amplitudes of different degrees of freedom in a two-degree-of-freedom system depend on the natural frequency.

Description : The relative amplitudes of different degrees of freedom in a two-degree-of-freedom system depend on the natural frequency.

Last Answer : True

If two sinusoids of the same frequency but of different amplitudes and phase angles are subtracted, the resultant is?

Last Answer : If two sinusoids of the same frequency but of different amplitudes and phase angles are subtracted, the resultant is a sinusoid of the same frequency.

What information must be known to determine the component values for a voltage divider?

Description : What information must be known to determine the component values for a voltage divider?

Last Answer : The source voltage and load requirements (voltage and current).

What term describes a device used to conduct heat away from a component?

Description : What term describes a device used to conduct heat away from a component?

Last Answer : A thermal shunt.

What component(s) is/are used for low-frequency compensation for Q2?

Description : What component(s) is/are used for low-frequency compensation for Q2?

Last Answer : R9 and C5.

What compWhat component(s) is/are used for high-frequency compensation for Q1?

Description : What component(s) is/are used for high-frequency compensation for Q1?

Last Answer : L1, L2, and R5.

What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Description : What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Last Answer : The coupling capacitor (C3).

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

What is the formula used to determine the gain of an amplifying device?

Description : What is the formula used to determine the gain of an amplifying device?

Last Answer : Gain = output ÷ input.

Determine from the following radio frequency that falls under the very high frequency band of the radio spectrum. A. 345.00 MHz B. 144.50 MHz C. 235.50 MHz D. 450.00 MHz

Description : Determine from the following radio frequency that falls under the very high frequency band of the radio spectrum. A. 345.00 MHz B. 144.50 MHz C. 235.50 MHz D. 450.00 MHz

Last Answer : C. 235.50 MHz

What two variables determine the primary frequency of a resonant cavity?

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

In an astable multivibrator, which components determine the pulse repetition frequency?

Description : In an astable multivibrator, which components determine the pulse repetition frequency?

Last Answer : RC coupling networks.

What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Description : What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Last Answer : a. Size of the headgap. b. Speed of the magnetic tape.

What two factors determine the frequency of the output voltage of an alternator?

Description : What two factors determine the frequency of the output voltage of an alternator?

Last Answer : Speed of rotation and number of poles.

From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Description : From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Last Answer : d.Constructive Solid Geometry

A fallen nest of chimney sweeps. Will they return if I give them their nest back? Or do they need to build new ones?

Description : It's in a hurry. The female definitely needs to lay eggs.

Last Answer : You can try, but there is very little chance that they will return.

Sweeps are used for? a Seedped preparation b Ridging c Earthing plants d Mulching

Description : Sweeps are used for? a Seedped preparation b Ridging c Earthing plants d Mulching

Last Answer : d Mulching

If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Description : If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Last Answer : (B) Underfired

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

Sweeps are used for: a. Seedbed preparation b. Ridging c.Earthing plants d. Mulching

Description : Sweeps are used for: a. Seedbed preparation b. Ridging c.Earthing plants d. Mulching

Last Answer : d. Mulching

V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Description : V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Last Answer : b) Stubble mulch tillage

Chimney Sweeps employs people to clean fireplaces and chimneys in homes and apartments. The firm is primarily the marketer of: A)a service B)a good C)an idea D)an image E)a physical entity

Description : Chimney Sweeps employs people to clean fireplaces and chimneys in homes and apartments. The firm is primarily the marketer of: A)a service B)a good C)an idea D)an image E)a physical entity

Last Answer : A)a service

___for ping sweeps and port scanning a) Sam Spade b) SuperScan c) NetScan d) NetCat

Description : ___for ping sweeps and port scanning a) Sam Spade b) SuperScan c) NetScan d) NetCat

Last Answer : b) SuperScan

Which tool is used for ping sweeps and port scanning? A. Netcat B. SamSpade C. SuperScan D. All the above

Description : Which tool is used for ping sweeps and port scanning? A. Netcat B. SamSpade C. SuperScan D. All the above

Last Answer : C. SuperScan

The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Description : The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Last Answer : D. 300 – 3000 MHz

What band of frequencies do these satellites operate? A. L band B. Ka band C. C band D. Ku band

Description : What band of frequencies do these satellites operate? A. L band B. Ka band C. C band D. Ku band

Last Answer : A. L band

Which band of frequencies used by military for its satellites and radar? A. C band B. X band C. L band D. P band

Description : Which band of frequencies used by military for its satellites and radar? A. C band B. X band C. L band D. P band

Last Answer : B. X band

Troposheric scatter uses the frequencies in the ________ band. A. VLF B. UHF C. VHF D. UF

Description : Troposheric scatter uses the frequencies in the ________ band. A. VLF B. UHF C. VHF D. UF

Last Answer : B. UHF

The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Description : The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Last Answer : C. band stop

ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Description : ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Last Answer : A. aperiodic

The band of light frequencies that are too low to be seen by the human eye ∙ A. Infrared ∙ B. X-rays ∙ C. Visible ∙ D. Ultraviolet

Description : The band of light frequencies that are too low to be seen by the human eye ∙ A. Infrared ∙ B. X-rays ∙ C. Visible ∙ D. Ultraviolet

Last Answer : Ultraviolet

The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Description : The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Last Answer : B. Visible light

The band of light frequencies that are too high to be seen by the human eye. ∙ A. Ultraviolet ∙ B. Visible light ∙ C. Infrared ∙ D. Yellow

Description : The band of light frequencies that are too high to be seen by the human eye. ∙ A. Ultraviolet ∙ B. Visible light ∙ C. Infrared ∙ D. Yellow

Last Answer : ∙ C. Infrared

What range of frequencies are usually referred to as the UHF Band? w) 3 to 30 Megahertz x) 30 to 300 Megahertz y) 300 to 3,000 Megahertz z) 30,000 to 300,000 Megahertz

Description : What range of frequencies are usually referred to as the UHF Band? w) 3 to 30 Megahertz x) 30 to 300 Megahertz y) 300 to 3,000 Megahertz z) 30,000 to 300,000 Megahertz

Last Answer : ANSWER: Y -- 300 TO 3,000 MEGAHERTZ

What type of insulator works well at very high frequencies?

Description : What type of insulator works well at very high frequencies?

Last Answer : A shorted quarter-wave section called a metallic insulator.

At very high frequencies, what characteristics are displayed by ordinary insulators?

Description : At very high frequencies, what characteristics are displayed by ordinary insulators?

Last Answer : The characteristics of the dielectric of a capacitor.